[PATCH v3 2/2] dt-bindings: hwmon: Add adm127x documentation
Guenter Roeck
linux at roeck-us.net
Sun Oct 28 04:27:25 AEDT 2018
On Wed, Oct 17, 2018 at 03:27:09PM -0700, Kun Yi wrote:
> adm127x are hot-swap controllers that allow a circuit board to be removed from
> or inserted into a live backplane. This patch adds the device tree
> bindings documentation.
>
> Signed-off-by: Kun Yi <kunyi at google.com>
> Reviewed-by: Rob Herring <robh at kernel.org>
Applied to hwmon-next.
Thanks,
Guenter
> ---
> .../devicetree/bindings/hwmon/adm1275.txt | 25 +++++++++++++++++++
> 1 file changed, 25 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/adm1275.txt
>
> diff --git a/Documentation/devicetree/bindings/hwmon/adm1275.txt b/Documentation/devicetree/bindings/hwmon/adm1275.txt
> new file mode 100644
> index 000000000000..1ecd03f3da4d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/adm1275.txt
> @@ -0,0 +1,25 @@
> +adm1275 properties
> +
> +Required properties:
> +- compatible: Must be one of the supported compatible strings:
> + - "adi,adm1075" for adm1075
> + - "adi,adm1272" for adm1272
> + - "adi,adm1275" for adm1275
> + - "adi,adm1276" for adm1276
> + - "adi,adm1278" for adm1278
> + - "adi,adm1293" for adm1293
> + - "adi,adm1294" for adm1294
> +- reg: I2C address
> +
> +Optional properties:
> +
> +- shunt-resistor-micro-ohms
> + Shunt resistor value in micro-Ohm
> +
> +Example:
> +
> +adm1272 at 10 {
> + compatible = "adi,adm1272";
> + reg = <0x10>;
> + shunt-resistor-micro-ohms = <500>;
> +};
More information about the openbmc
mailing list