VHUB didn't work on AST2500
xiuzhi
1450335857 at qq.com
Fri Oct 26 17:34:50 AEDT 2018
Hi Eddie,
Thanks for your reply.
It seemd that the error was caused by the version dismatch of kernel ,libvncserver ,obmc-ikvm and vnc client.
Would you like to give me your git commits numbers of them?
Best,
xiuzhi
On 10/24/2018 09:52 PM, xiuzhi wrote:
> Hi Ben,
> I use vncviewer , xtightvncviewer 1.3.9-6.4ubuntu1.
> And I also tested the ikvm by webui
> vnc(_https://gerrit.openbmc-project.xyz/#/c/openbmc/phosphor-webui/+/10268/_)
> ,the same errors occured.
> The same source code obmc-ikvm and this kernel branch video-dev5
> works on my other AST2400 hardware machine.
> I remembered only one kernel version seemed to work on ast2500 ,I
> tested it six weeks ago .
> the kernel version is:
>
> KBRANCH ?= "video-dev"
> LINUX_VERSION ?= "4.17.11"
> SRCREV="09a65900b2fc7aab9caf9d0dfabc7ba80525b1dd"
> the git repo is from git://github.com/eddiejames/linux/,
>
> https://gerrit.openbmc-project.xyz/#/c/openbmc/openbmc/+/11500/5/meta-openbmc-bsp/meta-aspeed/recipes-kernel/linux/linux-aspeed_git.bb
> I want to test this kernel version ,but now this git repo is not
> available ,
> I asked Eddiejames week ago, and get no response until now .
> It is so bad that I did not backup this kernel on my local machice.
I never made any kernel changes related to USB in my github trees, as
far as I know, so shouldn't be any difference. That original gerrit
commit was purely for our testing purposes for our system... not really
something I can support actively.
I have a number of commits pending review that you could try and pull in
if you really need this now:
https://gerrit.openbmc-project.xyz/#/c/openbmc/meta-phosphor/+/13536/
https://gerrit.openbmc-project.xyz/#/c/openbmc/meta-aspeed/+/13541/
https://gerrit.openbmc-project.xyz/#/c/openbmc/obmc-ikvm/+/12126/
https://gerrit.openbmc-project.xyz/#/c/openbmc/obmc-ikvm/+/13888/
Use these in combination with the two commits at the top of my video-dev
linux tree for your kernel.
Thanks,
Eddie
>
> Best.
> Xiuzhi
> On Thu, 2018-10-25 at 09:39 +0800, xiuzhi wrote:
> > Hi Ben,
> > I open the CONFIG_USB_GADGET_DEBUG .
> > and input the following keys by order:
> > ';''Enter' :work good,can see ';' on host screen
> > 'a''Enter' :error,see anything on screen
> > 'b''Enter' :error,see anything on screen
> > '1''Enter' :good
> > '2''Enter' :good
> > '3''Enter' :good
> > '4''Enter' :good
> > '5''Enter' :error deadlock
> > The log is:
>
> Can you tell me more about the userspace components you use to send
> those keys ? I'd like to try to reproduce here.
>
> > [ 78.820671] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request()
> failed for pin 67
> > [ 78.828274] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: pin-67
> (1e780000.gpio:347) status -1
> > [ 80.698564] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request()
> failed for pin 67
> > [ 80.706166] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: pin-67
> (1e780000.gpio:347) status -
> > [ 94.447816] udc 1e6a0000.usb-vhub:p1: registering UDC driver
> [obmc_hid]
> > [ 94.447909] configfs-gadget gadget: adding 'hid'/15e5a204 to
> config 'c'/70dd0747
> > [ 94.447940] aspeed_vhub 1e6a0000.usb-vhub: port1 Match EP type 3
> > [ 94.447958] aspeed_vhub 1e6a0000.usb-vhub: port1 Allocating gen
> EP 0 for addr 1
> > [ 94.448474] aspeed_vhub 1e6a0000.usb-vhub: port1 Allocated epn#0
> for port EP1
> > [ 94.448505] aspeed_vhub 1e6a0000.usb-vhub: port1 Match EP type 3
> > [ 94.448522] aspeed_vhub 1e6a0000.usb-vhub: port1 Allocating gen
> EP 1 for addr 2
> > [ 94.448780] aspeed_vhub 1e6a0000.usb-vhub: port1 Allocated epn#1
> for port EP2
> > [ 94.449270] aspeed_vhub 1e6a0000.usb-vhub: port1 start
> > [ 94.449297] aspeed_vhub 1e6a0000.usb-vhub: port1 pullup(1)
> > [ 94.449317] aspeed_vhub 1e6a0000.usb-vhub: port1 port 1 status
> 0000 -> 0001 (C=1)
> > [ 100.158377] aspeed_vhub 1e6a0000.usb-vhub: USB bus resume
> > [ 100.158400] configfs-gadget gadget: resume
> > [ 100.158415] aspeed_vhub 1e6a0000.usb-vhub: USB bus reset
> > [ 100.301048] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet
> 00/05/0002/0000/0000 [out] st=0
> > [ 100.301081] aspeed_vhub 1e6a0000.usb-vhub: USB status=0b100000
> speed=high
> > [ 100.301096] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SET_ADDRESS:
> Got address 2
> > [ 100.322061] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet
> 80/06/0100/0000/0008 [in] st=0
> > [ 100.322090] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0
> GET_DESCRIPTOR(type:1)
> > [ 100.326625] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet
> 80/06/0100/0000/0012 [in] st=0
> > [ 100.326656] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0
> GET_DESCRIPTOR(type:1)
> > [ 100.331359] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet
> 80/06/0200/0000/0008 [in] st=0
> > [ 100.331392] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0
> GET_DESCRIPTOR(type:2)
> > [ 100.335194] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet
> 80/06/0200/0000/0019 [in] st=0
> > [ 100.335221] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0
> GET_DESCRIPTOR(type:2)
> > [ 100.343939] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet
> 80/06/0300/0000/0002 [in] st=0
> > [ 100.344272] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet
> 80/06/0300/0000/0004 [in] st=0
> > [ 100.344647] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet
> 00/09/0001/0000/0000 [out] st=0
> > [ 100.378145] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet
> a0/06/2900/0000/0002 [in] st=0
> > [ 100.378178] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0
> GetHubDescriptor(0)
> > [ 100.378195] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0
> GET_DESCRIPTOR(type:41)
> > [ 100.378522] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet
> a0/06/2900/0000/0009 [in] st=0
> > [ 100.378546] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0
> GetHubDescriptor(0)
> > [ 100.378560] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0
> GET_DESCRIPTOR(type:41)
> > [ 100.382665] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet
> 23/03/0008/0001/0000 [out] st=0
> > [ 100.382697] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0
> SetPortFeature(1,8)
> > [ 100.382896] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet
> 23/03/0008/0002/0000 [out] st=0
> > [ 100.382922] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0
> SetPortFeature(2,8)
> > [ 100.383148] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet
> 23/03/0008/0003/0000 [out] st=0
> > [ 100.383173] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0
> SetPortFeature(3,8)
> > [ 100.383396] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet
> 23/03/0008/0004/0000 [out] st=0
> > [ 100.383422] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0
> SetPortFeature(4,8)
> > [ 100.383643] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet
> 23/03/0008/0005/0000 [out] st=0
> > [ 100.383668] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0
> SetPortFeature(5,8)
> > [ 100.403844] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet
> a0/00/0000/0000/0004 [in] st=0
> > [ 100.403871] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetHubStatus
> > [ 100.549225] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet
> a3/00/0000/0001/0004 [in] st=0
> > [ 100.549257] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetPortStatus(1)
> > [ 100.549275] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 port
> status=0101 change=0001
> > [ 100.549651] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet
> 23/01/0010/0001/0000 [out] st=0
> > [ 100.549681] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0
> ClearPortFeature(1,16)
> > [ 100.664592] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet
> 23/03/0004/0001/0000 [out] st=0
> > [ 100.664625] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0
> SetPortFeature(1,4)
> > [ 100.664639] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 Port reset !
> > [ 100.664658] aspeed_vhub 1e6a0000.usb-vhub: port1 port 1 status
> 0001 -> 0011 (C=0)
> > [ 100.664672] aspeed_vhub 1e6a0000.usb-vhub: port1 Reset at unknown
> speed of disabled device, enabling.
> > [ 100.664689] aspeed_vhub 1e6a0000.usb-vhub: port1 port 1 status
> 0011 -> 0403 (C=1)
> > [ 100.684840] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet
> a3/00/0000/0001/0004 [in] st=0
> > [ 100.684867] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetPortStatus(1)
> > [ 100.684885] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 port
> status=0503 change=0012
> > [ 100.685276] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet
> 23/01/0011/0001/0000 [out] st=0
> > [ 100.685306] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0
> ClearPortFeature(1,17)
> > [ 100.685518] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet
> 23/01/0014/0001/0000 [out] st=0
> > [ 100.685544] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0
> ClearPortFeature(1,20)
> > [ 100.698539] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet
> 00/05/0003/0000/0000 [out] st=0
> > [ 100.698568] aspeed_vhub 1e6a0000.usb-vhub: port1 fist packet,
> captured speed 3
> > [ 100.698585] aspeed_vhub 1e6a0000.usb-vhub: port1 SET_ADDRESS: Got
> address 3
> > [ 100.714314] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet
> a3/00/0000/0001/0004 [in] st=0
> > [ 100.714339] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetPortStatus(1)
> > [ 100.714354] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 port
> status=0503 change=0000
> > [ 100.729165] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet
> 80/06/0100/0000/0008 [in] st=0
> > [ 100.729195] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding
> to gadget...
> > [ 100.729227] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver
> returned 0
> > [ 100.733627] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet
> 80/06/0100/0000/0012 [in] st=0
> > [ 100.733658] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding
> to gadget...
> > [ 100.733690] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver
> returned 0
> > [ 100.738363] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet
> 80/06/0200/0000/0008 [in] st=0
> > [ 100.738391] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding
> to gadget...
> > [ 100.738427] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver
> returned 0
> > [ 100.742195] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet
> 80/06/0200/0000/0029 [in] st=0
> > [ 100.742225] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding
> to gadget...
> > [ 100.742262] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver
> returned 0
> > [ 100.750944] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet
> 80/06/0300/0000/0002 [in] st=0
> > [ 100.750972] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding
> to gadget...
> > [ 100.751006] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver
> returned 0
> > [ 100.751400] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet
> 80/06/0300/0000/0004 [in] st=0
> > [ 100.751425] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding
> to gadget...
> > [ 100.751455] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver
> returned 0
> > [ 100.751777] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet
> 00/09/0001/0000/0000 [out] st=0
> > [ 100.751803] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding
> to gadget...
> > [ 100.751821] configfs-gadget gadget: high-speed config #1: c
> > [ 100.757460] aspeed_vhub 1e6a0000.usb-vhub: port1:EP1 Enabling
> [in] intr num 1 maxpacket=11
> > [ 100.757502] aspeed_vhub 1e6a0000.usb-vhub: port1:EP2 Enabling
> [out] intr num 2 maxpacket=11
> > [ 100.757549] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver
> returned 0
> > [ 100.820566] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet
> 80/08/0000/0000/0001 [in] st=0
> > [ 100.820594] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding
> to gadget...
> > [ 100.820621] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver
> returned 0
> > [ 100.821026] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet
> a1/03/0000/0000/0001 [in] st=0
> > [ 100.821050] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding
> to gadget...
> > [ 100.821076] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver
> returned 0
> > [ 100.821397] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet
> 21/0b/0000/0000/0000 [out] st=0
> > [ 100.821422] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding
> to gadget...
> > [ 100.821451] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver
> returned 0
> > [ 100.821643] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet
> 21/09/0200/0000/0001 [out] st=0
> > [ 100.821666] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding
> to gadget...
> > [ 100.821685] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver
> returned -95
> > [ 100.821697] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 stalling
> > [ 100.821735] aspeed_vhub 1e6a0000.usb-vhub: status direction mismatch
> > [ 100.913006] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet
> 21/09/0200/0000/0001 [out] st=0
> > [ 100.913034] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding
> to gadget...
> > [ 100.913056] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver
> returned -95
> > [ 100.913067] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 stalling
> > [ 100.946228] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet
> a3/00/0000/0001/0004 [in] st=0
> > [ 100.946257] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetPortStatus(1)
> > [ 100.946274] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 port
> status=0503 change=0000
> > [ 100.946645] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet
> a0/00/0000/0000/0004 [in] st=0
> > [ 100.946672] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetHubStatus
> > [ 399.741059] aspeed_vhub 1e6a0000.usb-vhub: USB bus suspend
> > [ 399.741081] configfs-gadget gadget: suspend
> > Best,
> > Xiuzhi
> >
> > ------------------ Original ------------------
> > From: "Benjamin Herrenschmidt";<benh at kernel.crashing.org>;
> > Send time: Thursday, Oct 25, 2018 6:42 AM
> > To: "Joel Stanley"<joel at jms.id.au>; "xiuzhi"<1450335857 at qq.com>;
> > Cc: "a.filippov"<a.filippov at yadro.com>; "OpenBMC
> Maillist"<openbmc at lists.ozlabs.org>;
> > Subject: Re: VHUB didn't work on AST2500
> >
> > On Wed, 2018-10-24 at 17:02 +1030, Joel Stanley wrote:
> > > On Wed, 24 Oct 2018 at 17:00, xiuzhi <1450335857 at qq.com> wrote:
> > > > I am porting obmc-ikvm to my hardware platform. The host screen
> can be seen by vncviewer , but the mouse and keyboard didn't work on
> AST2500
> > > > . Only the keys ';' , 'Enter', '1','2','3','4' work. others
> keyinput will deadlock the host screen .
> > > > The kernel error log:
> > > > [ 99.326586] configfs-gadget gadget: high-speed config #1: c
> > > > [ 99.403704] aspeed_vhub 1e6a0000.usb-vhub: status direction
> mismatch
> > > > [ 99.492831] aspeed_vhub 1e6a0000.usb-vhub: status direction
> mismatch
> > > > The kernel version is : video-dev5,
> > > > commit 2acbc35adcfe15971b701770e1105276a18da9f7
> > > >
> > > > Who can give me some suggestions to debug it?
> > >
> > > Ben, do you have any advice?
> >
> > I need to know a bit more. What is used as a gadget driver on the BMC ?
> >
> > I would probably need to reproduce with some added traces to the driver
> > to figure out what's going on.
> >
> > One first thing to try would be a run with CONFIG_USB_GADGET_DEBUG
> > along with some indication of what actions happen corresponding to what
> > part of the log (ie, press key 'a' etc...).
> >
> > Cheers,
> > Ben.
> >
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20181026/02bc5bea/attachment-0001.html>
More information about the openbmc
mailing list