VHUB didn't work on AST2500

xiuzhi 1450335857 at qq.com
Thu Oct 25 13:52:42 AEDT 2018


Hi Ben,
  I use vncviewer , xtightvncviewer 1.3.9-6.4ubuntu1.
And I also tested the ikvm by webui vnc(https://gerrit.openbmc-project.xyz/#/c/openbmc/phosphor-webui/+/10268/)  ,the same errors occured.
 	 	 	 

The same source code obmc-ikvm and this  kernel branch video-dev5  works on my other  AST2400 hardware machine. 
I remembered  only one  kernel version seemed to work on ast2500 ,I tested it six weeks ago .
 the kernel version is:


KBRANCH ?= "video-dev"
LINUX_VERSION ?= "4.17.11"
SRCREV="09a65900b2fc7aab9caf9d0dfabc7ba80525b1dd"

the git repo is from  git://github.com/eddiejames/linux/,


https://gerrit.openbmc-project.xyz/#/c/openbmc/openbmc/+/11500/5/meta-openbmc-bsp/meta-aspeed/recipes-kernel/linux/linux-aspeed_git.bb
I want to test this kernel version ,but now this git repo is not available ,
 I asked Eddiejames week ago, and get no response until now .
 It is so bad that I did not  backup this kernel on my local machice.


Best.
Xiuzhi

On Thu, 2018-10-25 at 09:39 +0800, xiuzhi wrote:
> Hi Ben,
>   I open the CONFIG_USB_GADGET_DEBUG . 
> and input the following keys by order:
> ';''Enter' :work good,can see ';' on host screen
> 'a''Enter' :error,see anything on screen
> 'b''Enter' :error,see anything on screen
> '1''Enter' :good
> '2''Enter' :good
> '3''Enter' :good
> '4''Enter' :good
> '5''Enter'  :error deadlock
> The log is:

Can you tell me more about the userspace components you use to send
those keys ? I'd like to try to reproduce here.

> [   78.820671] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request() failed for pin 67
> [   78.828274] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: pin-67 (1e780000.gpio:347) status -1
> [   80.698564] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request() failed for pin 67
> [   80.706166] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: pin-67 (1e780000.gpio:347) status -
> [   94.447816] udc 1e6a0000.usb-vhub:p1: registering UDC driver [obmc_hid]
> [   94.447909] configfs-gadget gadget: adding 'hid'/15e5a204 to config 'c'/70dd0747
> [   94.447940] aspeed_vhub 1e6a0000.usb-vhub: port1 Match EP type 3
> [   94.447958] aspeed_vhub 1e6a0000.usb-vhub: port1 Allocating gen EP 0 for addr 1
> [   94.448474] aspeed_vhub 1e6a0000.usb-vhub: port1 Allocated epn#0 for port EP1
> [   94.448505] aspeed_vhub 1e6a0000.usb-vhub: port1 Match EP type 3
> [   94.448522] aspeed_vhub 1e6a0000.usb-vhub: port1 Allocating gen EP 1 for addr 2
> [   94.448780] aspeed_vhub 1e6a0000.usb-vhub: port1 Allocated epn#1 for port EP2
> [   94.449270] aspeed_vhub 1e6a0000.usb-vhub: port1 start
> [   94.449297] aspeed_vhub 1e6a0000.usb-vhub: port1 pullup(1)
> [   94.449317] aspeed_vhub 1e6a0000.usb-vhub: port1 port 1 status 0000 -> 0001 (C=1)
> [  100.158377] aspeed_vhub 1e6a0000.usb-vhub: USB bus resume
> [  100.158400] configfs-gadget gadget: resume
> [  100.158415] aspeed_vhub 1e6a0000.usb-vhub: USB bus reset
> [  100.301048] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 00/05/0002/0000/0000 [out] st=0
> [  100.301081] aspeed_vhub 1e6a0000.usb-vhub: USB status=0b100000 speed=high
> [  100.301096] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SET_ADDRESS: Got address 2
> [  100.322061] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 80/06/0100/0000/0008 [in] st=0
> [  100.322090] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GET_DESCRIPTOR(type:1)
> [  100.326625] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 80/06/0100/0000/0012 [in] st=0
> [  100.326656] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GET_DESCRIPTOR(type:1)
> [  100.331359] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 80/06/0200/0000/0008 [in] st=0
> [  100.331392] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GET_DESCRIPTOR(type:2)
> [  100.335194] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 80/06/0200/0000/0019 [in] st=0
> [  100.335221] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GET_DESCRIPTOR(type:2)
> [  100.343939] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 80/06/0300/0000/0002 [in] st=0
> [  100.344272] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 80/06/0300/0000/0004 [in] st=0
> [  100.344647] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 00/09/0001/0000/0000 [out] st=0
> [  100.378145] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet a0/06/2900/0000/0002 [in] st=0
> [  100.378178] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetHubDescriptor(0)
> [  100.378195] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GET_DESCRIPTOR(type:41)
> [  100.378522] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet a0/06/2900/0000/0009 [in] st=0
> [  100.378546] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetHubDescriptor(0)
> [  100.378560] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GET_DESCRIPTOR(type:41)
> [  100.382665] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 23/03/0008/0001/0000 [out] st=0
> [  100.382697] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SetPortFeature(1,8)
> [  100.382896] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 23/03/0008/0002/0000 [out] st=0
> [  100.382922] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SetPortFeature(2,8)
> [  100.383148] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 23/03/0008/0003/0000 [out] st=0
> [  100.383173] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SetPortFeature(3,8)
> [  100.383396] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 23/03/0008/0004/0000 [out] st=0
> [  100.383422] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SetPortFeature(4,8)
> [  100.383643] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 23/03/0008/0005/0000 [out] st=0
> [  100.383668] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SetPortFeature(5,8)
> [  100.403844] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet a0/00/0000/0000/0004 [in] st=0
> [  100.403871] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetHubStatus
> [  100.549225] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet a3/00/0000/0001/0004 [in] st=0
> [  100.549257] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetPortStatus(1)
> [  100.549275] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0  port status=0101 change=0001
> [  100.549651] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 23/01/0010/0001/0000 [out] st=0
> [  100.549681] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 ClearPortFeature(1,16)
> [  100.664592] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 23/03/0004/0001/0000 [out] st=0
> [  100.664625] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SetPortFeature(1,4)
> [  100.664639] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 Port reset !
> [  100.664658] aspeed_vhub 1e6a0000.usb-vhub: port1 port 1 status 0001 -> 0011 (C=0)
> [  100.664672] aspeed_vhub 1e6a0000.usb-vhub: port1 Reset at unknown speed of disabled device, enabling.
> [  100.664689] aspeed_vhub 1e6a0000.usb-vhub: port1 port 1 status 0011 -> 0403 (C=1)
> [  100.684840] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet a3/00/0000/0001/0004 [in] st=0
> [  100.684867] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetPortStatus(1)
> [  100.684885] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0  port status=0503 change=0012
> [  100.685276] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 23/01/0011/0001/0000 [out] st=0
> [  100.685306] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 ClearPortFeature(1,17)
> [  100.685518] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet 23/01/0014/0001/0000 [out] st=0
> [  100.685544] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 ClearPortFeature(1,20)
> [  100.698539] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 00/05/0003/0000/0000 [out] st=0
> [  100.698568] aspeed_vhub 1e6a0000.usb-vhub: port1 fist packet, captured speed 3
> [  100.698585] aspeed_vhub 1e6a0000.usb-vhub: port1 SET_ADDRESS: Got address 3
> [  100.714314] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet a3/00/0000/0001/0004 [in] st=0
> [  100.714339] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetPortStatus(1)
> [  100.714354] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0  port status=0503 change=0000
> [  100.729165] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 80/06/0100/0000/0008 [in] st=0
> [  100.729195] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding to gadget...
> [  100.729227] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver returned 0
> [  100.733627] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 80/06/0100/0000/0012 [in] st=0
> [  100.733658] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding to gadget...
> [  100.733690] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver returned 0
> [  100.738363] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 80/06/0200/0000/0008 [in] st=0
> [  100.738391] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding to gadget...
> [  100.738427] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver returned 0
> [  100.742195] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 80/06/0200/0000/0029 [in] st=0
> [  100.742225] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding to gadget...
> [  100.742262] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver returned 0
> [  100.750944] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 80/06/0300/0000/0002 [in] st=0
> [  100.750972] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding to gadget...
> [  100.751006] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver returned 0
> [  100.751400] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 80/06/0300/0000/0004 [in] st=0
> [  100.751425] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding to gadget...
> [  100.751455] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver returned 0
> [  100.751777] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 00/09/0001/0000/0000 [out] st=0
> [  100.751803] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding to gadget...
> [  100.751821] configfs-gadget gadget: high-speed config #1: c
> [  100.757460] aspeed_vhub 1e6a0000.usb-vhub: port1:EP1 Enabling [in] intr num 1 maxpacket=11
> [  100.757502] aspeed_vhub 1e6a0000.usb-vhub: port1:EP2 Enabling [out] intr num 2 maxpacket=11
> [  100.757549] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver returned 0
> [  100.820566] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 80/08/0000/0000/0001 [in] st=0
> [  100.820594] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding to gadget...
> [  100.820621] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver returned 0
> [  100.821026] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet a1/03/0000/0000/0001 [in] st=0
> [  100.821050] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding to gadget...
> [  100.821076] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver returned 0
> [  100.821397] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 21/0b/0000/0000/0000 [out] st=0
> [  100.821422] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding to gadget...
> [  100.821451] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver returned 0
> [  100.821643] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 21/09/0200/0000/0001 [out] st=0
> [  100.821666] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding to gadget...
> [  100.821685] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver returned -95
> [  100.821697] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 stalling
> [  100.821735] aspeed_vhub 1e6a0000.usb-vhub: status direction mismatch
> [  100.913006] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 SETUP packet 21/09/0200/0000/0001 [out] st=0
> [  100.913034] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 forwarding to gadget...
> [  100.913056] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 driver returned -95
> [  100.913067] aspeed_vhub 1e6a0000.usb-vhub: port1:EP0 stalling
> [  100.946228] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet a3/00/0000/0001/0004 [in] st=0
> [  100.946257] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetPortStatus(1)
> [  100.946274] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0  port status=0503 change=0000
> [  100.946645] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 SETUP packet a0/00/0000/0000/0004 [in] st=0
> [  100.946672] aspeed_vhub 1e6a0000.usb-vhub: hub:EP0 GetHubStatus
> [  399.741059] aspeed_vhub 1e6a0000.usb-vhub: USB bus suspend
> [  399.741081] configfs-gadget gadget: suspend
> Best,
> Xiuzhi
> 
> ------------------ Original ------------------
> From:  "Benjamin Herrenschmidt";<benh at kernel.crashing.org>;
> Send time: Thursday, Oct 25, 2018 6:42 AM
> To: "Joel Stanley"<joel at jms.id.au>; "xiuzhi"<1450335857 at qq.com>;
> Cc: "a.filippov"<a.filippov at yadro.com>; "OpenBMC Maillist"<openbmc at lists.ozlabs.org>;
> Subject:  Re: VHUB didn't work on AST2500
> 
> On Wed, 2018-10-24 at 17:02 +1030, Joel Stanley wrote:
> > On Wed, 24 Oct 2018 at 17:00, xiuzhi <1450335857 at qq.com> wrote:
> > >  I am porting obmc-ikvm to my hardware platform. The host screen can be seen by vncviewer , but the mouse and keyboard didn't work on AST2500
> > > . Only the keys ';' , 'Enter',  '1','2','3','4' work. others keyinput will deadlock the host screen .
> > > The kernel error log:
> > > [   99.326586] configfs-gadget gadget: high-speed config #1: c
> > > [   99.403704] aspeed_vhub 1e6a0000.usb-vhub: status direction mismatch
> > > [   99.492831] aspeed_vhub 1e6a0000.usb-vhub: status direction mismatch
> > > The kernel version is : video-dev5,
> > > commit 2acbc35adcfe15971b701770e1105276a18da9f7
> > > 
> > > Who can give me some suggestions to  debug it?
> > 
> > Ben, do you have any advice?
> 
> I need to know a bit more. What is used as a gadget driver on the BMC ?
> 
> I would probably need to reproduce with some added traces to the driver
> to figure out what's going on.
> 
> One first thing to try would be a run with CONFIG_USB_GADGET_DEBUG
> along with some indication of what actions happen corresponding to what
> part of the log (ie, press key 'a' etc...).
> 
> Cheers,
> Ben.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20181025/1e743616/attachment-0001.html>


More information about the openbmc mailing list