[RFC PATCH 2/2] net/ncsi: Configure multi-package, multi-channel modes with failover
Justin.Lee1 at Dell.com
Justin.Lee1 at Dell.com
Fri Oct 12 09:09:02 AEDT 2018
Hi Sam,
Please see my comments below.
Thanks,
Justin
> On Wed, 2018-10-10 at 22:36 +0000, Justin.Lee1 at Dell.com wrote:
> > Hi Samuel,
> >
> > I am still testing your change and have some comments below.
> >
> > Thanks,
> > Justin
> >
> >
> > > This patch extends the ncsi-netlink interface with two new commands and
> > > three new attributes to configure multiple packages and/or channels at
> > > once, and configure specific failover modes.
> > >
> > > NCSI_CMD_SET_PACKAGE mask and NCSI_CMD_SET_CHANNEL_MASK set a whitelist
> > > of packages or channels allowed to be configured with the
> > > NCSI_ATTR_PACKAGE_MASK and NCSI_ATTR_CHANNEL_MASK attributes
> > > respectively. If one of these whitelists is set only packages or
> > > channels matching the whitelist are considered for the channel queue in
> > > ncsi_choose_active_channel().
> > >
> > > These commands may also use the NCSI_ATTR_MULTI_FLAG to signal that
> > > multiple packages or channels may be configured simultaneously. NCSI
> > > hardware arbitration (HWA) must be available in order to enable
> > > multi-package mode. Multi-channel mode is always available.
> > >
> > > If the NCSI_ATTR_CHANNEL_ID attribute is present in the
> > > NCSI_CMD_SET_CHANNEL_MASK command the it sets the preferred channel as
> > > with the NCSI_CMD_SET_INTERFACE command. The combination of preferred
> > > channel and channel whitelist defines a primary channel and the allowed
> > > failover channels.
> > > If the NCSI_ATTR_MULTI_FLAG attribute is also present then the preferred
> > > channel is configured for Tx/Rx and the other channels are enabled only
> > > for Rx.
> > >
> > > Signed-off-by: Samuel Mendoza-Jonas <sam at mendozajonas.com>
> > > ---
> > > include/uapi/linux/ncsi.h | 16 +++
> > > net/ncsi/internal.h | 11 +-
> > > net/ncsi/ncsi-aen.c | 2 +-
> > > net/ncsi/ncsi-manage.c | 138 ++++++++++++++++--------
> > > net/ncsi/ncsi-netlink.c | 217 +++++++++++++++++++++++++++++++++-----
> > > net/ncsi/ncsi-rsp.c | 2 +-
> > > 6 files changed, 312 insertions(+), 74 deletions(-)
> > >
> > > diff --git a/include/uapi/linux/ncsi.h b/include/uapi/linux/ncsi.h
> > > index 4c292ecbb748..035fba1693f9 100644
> > > --- a/include/uapi/linux/ncsi.h
> > > +++ b/include/uapi/linux/ncsi.h
> > > @@ -23,6 +23,13 @@
> > > * optionally the preferred NCSI_ATTR_CHANNEL_ID.
> > > * @NCSI_CMD_CLEAR_INTERFACE: clear any preferred package/channel combination.
> > > * Requires NCSI_ATTR_IFINDEX.
> > > + * @NCSI_CMD_SET_PACKAGE_MASK: set a whitelist of allowed packages.
> > > + * @NCSI_CMD_SET_PACKAGE_MASK: set a whitelist of allowed channels.
> > > + * Requires NCSI_ATTR_IFINDEX and NCSI_ATTR_PACKAGE_MASK.
> > > + * @NCSI_CMD_SET_PACKAGE_MASK: set a whitelist of allowed channels.
> > > + * Requires NCSI_ATTR_IFINDEX, NCSI_ATTR_PACKAGE_ID, and
> > > + * NCSI_ATTR_CHANNEL_MASK. If NCSI_ATTR_CHANNEL_ID is present it sets
> > > + * the primary channel.
> > > * @NCSI_CMD_MAX: highest command number
> > > */
> >
> > There are some typo in the description.
> > * @NCSI_CMD_SET_PACKAGE_MASK: set a whitelist of allowed packages.
> > * Requires NCSI_ATTR_IFINDEX and NCSI_ATTR_PACKAGE_MASK.
> > * @NCSI_CMD_SET_CHANNEL_MASK: set a whitelist of allowed channels.
> > * Requires NCSI_ATTR_IFINDEX, NCSI_ATTR_PACKAGE_ID, and
> > * NCSI_ATTR_CHANNEL_MASK. If NCSI_ATTR_CHANNEL_ID is present it sets
> > * the primary channel.
>
> Haha, yes I threw that in at the end, thanks for catching it.
>
> >
> > > enum ncsi_nl_commands {
> > > @@ -30,6 +37,8 @@ enum ncsi_nl_commands {
> > > NCSI_CMD_PKG_INFO,
> > > NCSI_CMD_SET_INTERFACE,
> > > NCSI_CMD_CLEAR_INTERFACE,
> > > + NCSI_CMD_SET_PACKAGE_MASK,
> > > + NCSI_CMD_SET_CHANNEL_MASK,
> > >
> > > __NCSI_CMD_AFTER_LAST,
> > > NCSI_CMD_MAX = __NCSI_CMD_AFTER_LAST - 1
> > > @@ -43,6 +52,10 @@ enum ncsi_nl_commands {
> > > * @NCSI_ATTR_PACKAGE_LIST: nested array of NCSI_PKG_ATTR attributes
> > > * @NCSI_ATTR_PACKAGE_ID: package ID
> > > * @NCSI_ATTR_CHANNEL_ID: channel ID
> > > + * @NCSI_ATTR_MULTI_FLAG: flag to signal that multi-mode should be enabled with
> > > + * NCSI_CMD_SET_PACKAGE_MASK or NCSI_CMD_SET_CHANNEL_MASK.
> > > + * @NCSI_ATTR_PACKAGE_MASK: 32-bit mask of allowed packages.
> > > + * @NCSI_ATTR_CHANNEL_MASK: 32-bit mask of allowed channels.
> > > * @NCSI_ATTR_MAX: highest attribute number
> > > */
> > > enum ncsi_nl_attrs {
> > > @@ -51,6 +64,9 @@ enum ncsi_nl_attrs {
> > > NCSI_ATTR_PACKAGE_LIST,
> > > NCSI_ATTR_PACKAGE_ID,
> > > NCSI_ATTR_CHANNEL_ID,
> > > + NCSI_ATTR_MULTI_FLAG,
> > > + NCSI_ATTR_PACKAGE_MASK,
> > > + NCSI_ATTR_CHANNEL_MASK,
> >
> > Is there a case that we might set these two masks at the same time?
> > If not, maybe we can just have one generic MASK attribute.
> >
>
> I thought of this too: not yet, but I wonder if we might in the future.
> I'll have a think about it.
>
> > >
> > > __NCSI_ATTR_AFTER_LAST,
> > > NCSI_ATTR_MAX = __NCSI_ATTR_AFTER_LAST - 1
> > > diff --git a/net/ncsi/internal.h b/net/ncsi/internal.h
> > > index 3d0a33b874f5..8437474d0a78 100644
> > > --- a/net/ncsi/internal.h
> > > +++ b/net/ncsi/internal.h
> > > @@ -213,6 +213,10 @@ struct ncsi_package {
> > > unsigned int channel_num; /* Number of channels */
> > > struct list_head channels; /* List of chanels */
> > > struct list_head node; /* Form list of packages */
> > > +
> > > + bool multi_channel; /* Enable multiple channels */
> > > + u32 channel_whitelist; /* Channels to configure */
> > > + struct ncsi_channel *preferred_channel; /* Primary channel */
> > > };
> > >
> > > struct ncsi_request {
> > > @@ -280,8 +284,6 @@ struct ncsi_dev_priv {
> > > unsigned int package_num; /* Number of packages */
> > > struct list_head packages; /* List of packages */
> > > struct ncsi_channel *hot_channel; /* Channel was ever active */
> > > - struct ncsi_package *force_package; /* Force a specific package */
> > > - struct ncsi_channel *force_channel; /* Force a specific channel */
> > > struct ncsi_request requests[256]; /* Request table */
> > > unsigned int request_id; /* Last used request ID */
> > > #define NCSI_REQ_START_IDX 1
> > > @@ -294,6 +296,9 @@ struct ncsi_dev_priv {
> > > struct list_head node; /* Form NCSI device list */
> > > #define NCSI_MAX_VLAN_VIDS 15
> > > struct list_head vlan_vids; /* List of active VLAN IDs */
> > > +
> > > + bool multi_package; /* Enable multiple packages */
> > > + u32 package_whitelist; /* Packages to configure */
> > > };
> > >
> > > struct ncsi_cmd_arg {
> > > @@ -345,6 +350,8 @@ struct ncsi_request *ncsi_alloc_request(struct ncsi_dev_priv *ndp,
> > > void ncsi_free_request(struct ncsi_request *nr);
> > > struct ncsi_dev *ncsi_find_dev(struct net_device *dev);
> > > int ncsi_process_next_channel(struct ncsi_dev_priv *ndp);
> > > +bool ncsi_channel_is_last(struct ncsi_dev_priv *ndp,
> > > + struct ncsi_channel *channel);
> > >
> > > /* Packet handlers */
> > > u32 ncsi_calculate_checksum(unsigned char *data, int len);
> > > diff --git a/net/ncsi/ncsi-aen.c b/net/ncsi/ncsi-aen.c
> > > index 65f47a648be3..eac56aee30c4 100644
> > > --- a/net/ncsi/ncsi-aen.c
> > > +++ b/net/ncsi/ncsi-aen.c
> > > @@ -86,7 +86,7 @@ static int ncsi_aen_handler_lsc(struct ncsi_dev_priv *ndp,
> > > !(state == NCSI_CHANNEL_ACTIVE && !(data & 0x1)))
> > > return 0;
> > >
> > > - if (state == NCSI_CHANNEL_ACTIVE)
> > > + if (state == NCSI_CHANNEL_ACTIVE && ncsi_channel_is_last(ndp, nc))
> > > ndp->flags |= NCSI_DEV_RESHUFFLE;
> > >
> > > ncsi_stop_channel_monitor(nc);
> > > diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
> > > index 665bee25ec44..6a55df700bcb 100644
> > > --- a/net/ncsi/ncsi-manage.c
> > > +++ b/net/ncsi/ncsi-manage.c
> > > @@ -27,6 +27,24 @@
> > > LIST_HEAD(ncsi_dev_list);
> > > DEFINE_SPINLOCK(ncsi_dev_lock);
> > >
> > > +/* Returns true if the given channel is the last channel available */
> > > +bool ncsi_channel_is_last(struct ncsi_dev_priv *ndp,
> > > + struct ncsi_channel *channel)
> > > +{
> > > + struct ncsi_package *np;
> > > + struct ncsi_channel *nc;
> > > +
> > > + NCSI_FOR_EACH_PACKAGE(ndp, np)
> > > + NCSI_FOR_EACH_CHANNEL(np, nc) {
> > > + if (nc == channel)
> > > + continue;
> > > + if (nc->state == NCSI_CHANNEL_ACTIVE)
> > > + return false;
> > > + }
> > > +
> > > + return true;
> > > +}
> > > +
> > > static void ncsi_report_link(struct ncsi_dev_priv *ndp, bool force_down)
> > > {
> > > struct ncsi_dev *nd = &ndp->ndev;
> > > @@ -266,6 +284,7 @@ struct ncsi_package *ncsi_add_package(struct ncsi_dev_priv *ndp,
> > > np->ndp = ndp;
> > > spin_lock_init(&np->lock);
> > > INIT_LIST_HEAD(&np->channels);
> > > + np->channel_whitelist = UINT_MAX;
> > >
> > > spin_lock_irqsave(&ndp->lock, flags);
> > > tmp = ncsi_find_package(ndp, id);
> > > @@ -633,6 +652,34 @@ static int set_one_vid(struct ncsi_dev_priv *ndp, struct ncsi_channel *nc,
> > > return 0;
> > > }
> > >
> > > +/* Determine if a given channel should be the Tx channel */
> > > +bool ncsi_channel_is_tx(struct ncsi_dev_priv *ndp, struct ncsi_channel *nc)
> > > +{
> > > + struct ncsi_package *np = nc->package;
> > > + struct ncsi_channel *channel;
> > > + struct ncsi_channel_mode *ncm;
Learn from Dave. All local variable declarations from longest to shortest
line. :)
> > > +
> > > + NCSI_FOR_EACH_CHANNEL(np, channel) {
> > > + ncm = &channel->modes[NCSI_MODE_TX_ENABLE];
> > > + /* Another channel is already Tx */
> > > + if (ncm->enable)
> > > + return false;
> > > + }
> > > +
> > > + if (!np->preferred_channel)
> > > + return true;
> > > +
> > > + if (np->preferred_channel == nc)
> > > + return true;
> > > +
> > > + /* The preferred channel is not in the queue and not active */
> > > + if (list_empty(&np->preferred_channel->link) &&
> > > + np->preferred_channel->state != NCSI_CHANNEL_ACTIVE)
> > > + return true;
> > > +
> > > + return false;
> > > +}
> > > +
> > > static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
> > > {
> > > struct ncsi_dev *nd = &ndp->ndev;
> > > @@ -745,18 +792,22 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
> > > } else if (nd->state == ncsi_dev_state_config_ebf) {
> > > nca.type = NCSI_PKT_CMD_EBF;
> > > nca.dwords[0] = nc->caps[NCSI_CAP_BC].cap;
> > > - nd->state = ncsi_dev_state_config_ecnt;
> > > + if (ncsi_channel_is_tx(ndp, nc))
> > > + nd->state = ncsi_dev_state_config_ecnt;
> > > + else
> > > + nd->state = ncsi_dev_state_config_ec;
> > > #if IS_ENABLED(CONFIG_IPV6)
> > > if (ndp->inet6_addr_num > 0 &&
> > > (nc->caps[NCSI_CAP_GENERIC].cap &
> > > NCSI_CAP_GENERIC_MC))
> > > nd->state = ncsi_dev_state_config_egmf;
> > > - else
> > > - nd->state = ncsi_dev_state_config_ecnt;
> > > } else if (nd->state == ncsi_dev_state_config_egmf) {
> > > nca.type = NCSI_PKT_CMD_EGMF;
> > > nca.dwords[0] = nc->caps[NCSI_CAP_MC].cap;
> > > - nd->state = ncsi_dev_state_config_ecnt;
> > > + if (ncsi_channel_is_tx(ndp, nc))
> > > + nd->state = ncsi_dev_state_config_ecnt;
> > > + else
> > > + nd->state = ncsi_dev_state_config_ec;
> > > #endif /* CONFIG_IPV6 */
> > > } else if (nd->state == ncsi_dev_state_config_ecnt) {
> > > nca.type = NCSI_PKT_CMD_ECNT;
> > > @@ -840,43 +891,35 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
> > >
> > > static int ncsi_choose_active_channel(struct ncsi_dev_priv *ndp)
> > > {
> > > - struct ncsi_package *np, *force_package;
> > > - struct ncsi_channel *nc, *found, *hot_nc, *force_channel;
> > > + struct ncsi_package *np;
> > > + struct ncsi_channel *nc, *found, *hot_nc;
> > > struct ncsi_channel_mode *ncm;
> > > - unsigned long flags;
> > > + unsigned long flags, cflags;
> > > + bool with_link;
All local variable declarations from longest to shortest
line.
> > >
> > > spin_lock_irqsave(&ndp->lock, flags);
> > > hot_nc = ndp->hot_channel;
> > > - force_channel = ndp->force_channel;
> > > - force_package = ndp->force_package;
> > > spin_unlock_irqrestore(&ndp->lock, flags);
> > >
> > > - /* Force a specific channel whether or not it has link if we have been
> > > - * configured to do so
> > > - */
> > > - if (force_package && force_channel) {
> > > - found = force_channel;
> > > - ncm = &found->modes[NCSI_MODE_LINK];
> > > - if (!(ncm->data[2] & 0x1))
> > > - netdev_info(ndp->ndev.dev,
> > > - "NCSI: Channel %u forced, but it is link down\n",
> > > - found->id);
> > > - goto out;
> > > - }
> > > -
> > > - /* The search is done once an inactive channel with up
> > > - * link is found.
> > > + /* By default the search is done once an inactive channel with up
> > > + * link is found, unless a preferred channel is set.
> > > + * If multi_package or multi_channel are configured all channels in the
> > > + * whitelist with link are added to the channel queue.
> > > */
> > > found = NULL;
> > > + with_link = false;
> > > NCSI_FOR_EACH_PACKAGE(ndp, np) {
> > > - if (ndp->force_package && np != ndp->force_package)
> > > + if (!(ndp->package_whitelist & (0x1 << np->id)))
> > > continue;
> > > NCSI_FOR_EACH_CHANNEL(np, nc) {
> > > - spin_lock_irqsave(&nc->lock, flags);
> > > + if (!(np->channel_whitelist & (0x1 << nc->id)))
> > > + continue;
> > > +
> > > + spin_lock_irqsave(&nc->lock, cflags);
> > >
> > > if (!list_empty(&nc->link) ||
> > > nc->state != NCSI_CHANNEL_INACTIVE) {
> > > - spin_unlock_irqrestore(&nc->lock, flags);
> > > + spin_unlock_irqrestore(&nc->lock, cflags);
> > > continue;
> > > }
> > >
> > > @@ -888,32 +931,42 @@ static int ncsi_choose_active_channel(struct ncsi_dev_priv *ndp)
> > >
> > > ncm = &nc->modes[NCSI_MODE_LINK];
> > > if (ncm->data[2] & 0x1) {
> >
> > This data will not be updated if the channel monitor for it is not running.
> > If I move the cable from the current configured channel to the other channel,
> > NC-SI module will not detect the link status as the other channel is not configured
> > and AEN will not happen.
> > Is it per design that NC-SI module will always use the first interface with the link?
>
> We'll check the link state of every channel at init, and per-package on
> suspend events, but you're right that we only get AENs right now from
> configured channels. There's probably no reason why we could at least
> enable AENs on all channels even if we don't use them for network, maybe
> during the package probe step.
>
To receive the AEN packet, the channel (RX) needs to be enabled.
It seems that we need to send Get Link Status command to all channels before choosing
The active channel.
> >
> > > - spin_unlock_irqrestore(&nc->lock, flags);
> > > found = nc;
> > > - goto out;
> > > + with_link = true;
> > > +
> > > + spin_lock_irqsave(&ndp->lock, flags);
> > > + list_add_tail_rcu(&found->link,
> > > + &ndp->channel_queue);
> > > + spin_unlock_irqrestore(&ndp->lock, flags);
> > > +
> > > + netdev_dbg(ndp->ndev.dev,
> > > + "NCSI: Channel %u added to queue (link %s)\n",
> > > + found->id,
> > > + ncm->data[2] & 0x1 ? "up" : "down");
> > > }
If multi_channel is enabled, the interface without link still needs to be processed.
Something likes below?
} else if (np->multi_channel) {
found = nc;
spin_lock_irqsave(&ndp->lock, flags);
list_add_tail_rcu(&found->link,
&ndp->channel_queue);
spin_unlock_irqrestore(&ndp->lock, flags);
netdev_dbg(ndp->ndev.dev,
"NCSI: pkg %u ch %u added to queue (link %s)\n",
found->package->id,
found->id,
ncm->data[2] & 0x1 ? "up" : "down");
}
> > > + spin_unlock_irqrestore(&nc->lock, cflags);
> > >
> > > - spin_unlock_irqrestore(&nc->lock, flags);
> > > + if (with_link && !np->multi_channel)
> > > + break;
> > > }
> > > + if (with_link && !ndp->multi_package)
> > > + break;
> > > }
> > >
> > > - if (!found) {
> > > + if (!with_link && found) {
> > > + netdev_info(ndp->ndev.dev,
> > > + "NCSI: No channel with link found, configuring channel %u\n",
> > > + found->id);
> > > + spin_lock_irqsave(&ndp->lock, flags);
> > > + list_add_tail_rcu(&found->link, &ndp->channel_queue);
> > > + spin_unlock_irqrestore(&ndp->lock, flags);
> > > + } else if (!found) {
> > > netdev_warn(ndp->ndev.dev,
> > > - "NCSI: No channel found with link\n");
> > > + "NCSI: No channel found to configure!\n");
> > > ncsi_report_link(ndp, true);
> > > return -ENODEV;
> > > }
> > >
> > > - ncm = &found->modes[NCSI_MODE_LINK];
> > > - netdev_dbg(ndp->ndev.dev,
> > > - "NCSI: Channel %u added to queue (link %s)\n",
> > > - found->id, ncm->data[2] & 0x1 ? "up" : "down");
> > > -
> > > -out:
> > > - spin_lock_irqsave(&ndp->lock, flags);
> > > - list_add_tail_rcu(&found->link, &ndp->channel_queue);
> > > - spin_unlock_irqrestore(&ndp->lock, flags);
> > > -
> > > return ncsi_process_next_channel(ndp);
> > > }
> > >
> > > @@ -1428,6 +1481,7 @@ struct ncsi_dev *ncsi_register_dev(struct net_device *dev,
> > > INIT_LIST_HEAD(&ndp->channel_queue);
> > > INIT_LIST_HEAD(&ndp->vlan_vids);
> > > INIT_WORK(&ndp->work, ncsi_dev_work);
> > > + ndp->package_whitelist = UINT_MAX;
> > >
> > > /* Initialize private NCSI device */
> > > spin_lock_init(&ndp->lock);
> > > diff --git a/net/ncsi/ncsi-netlink.c b/net/ncsi/ncsi-netlink.c
> > > index 32cb7751d216..33a091e6f466 100644
> > > --- a/net/ncsi/ncsi-netlink.c
> > > +++ b/net/ncsi/ncsi-netlink.c
> >
> > Is the following missed in the patch?
> > static const struct nla_policy ncsi_genl_policy[NCSI_ATTR_MAX + 1] = {
> > ...
> > [NCSI_ATTR_MULTI_FLAG] = { .type = NLA_FLAG },
> > [NCSI_ATTR_PACKAGE_MASK] = { .type = NLA_U32 },
> > [NCSI_ATTR_CHANNEL_MASK] = { .type = NLA_U32 },
>
> Oops, added.
>
> >
> > > @@ -67,7 +67,7 @@ static int ncsi_write_channel_info(struct sk_buff *skb,
> > > nla_put_u32(skb, NCSI_CHANNEL_ATTR_LINK_STATE, m->data[2]);
> > > if (nc->state == NCSI_CHANNEL_ACTIVE)
> > > nla_put_flag(skb, NCSI_CHANNEL_ATTR_ACTIVE);
> > > - if (ndp->force_channel == nc)
> > > + if (nc == nc->package->preferred_channel)
> > > nla_put_flag(skb, NCSI_CHANNEL_ATTR_FORCED);
> > >
> > > nla_put_u32(skb, NCSI_CHANNEL_ATTR_VERSION_MAJOR, nc->version.version);
> > > @@ -112,7 +112,7 @@ static int ncsi_write_package_info(struct sk_buff *skb,
> > > if (!pnest)
> > > return -ENOMEM;
> > > nla_put_u32(skb, NCSI_PKG_ATTR_ID, np->id);
> > > - if (ndp->force_package == np)
> > > + if ((0x1 << np->id) == ndp->package_whitelist)
> > > nla_put_flag(skb, NCSI_PKG_ATTR_FORCED);
> > > cnest = nla_nest_start(skb, NCSI_PKG_ATTR_CHANNEL_LIST);
> > > if (!cnest) {
> > > @@ -288,45 +288,54 @@ static int ncsi_set_interface_nl(struct sk_buff *msg, struct genl_info *info)
> > > package_id = nla_get_u32(info->attrs[NCSI_ATTR_PACKAGE_ID]);
> > > package = NULL;
> > >
> > > - spin_lock_irqsave(&ndp->lock, flags);
> > > -
> > > NCSI_FOR_EACH_PACKAGE(ndp, np)
> > > if (np->id == package_id)
> > > package = np;
> > > if (!package) {
> > > /* The user has set a package that does not exist */
> > > - spin_unlock_irqrestore(&ndp->lock, flags);
> > > return -ERANGE;
> > > }
> > >
> > > channel = NULL;
> > > - if (!info->attrs[NCSI_ATTR_CHANNEL_ID]) {
> > > - /* Allow any channel */
> > > - channel_id = NCSI_RESERVED_CHANNEL;
> > > - } else {
> > > + if (info->attrs[NCSI_ATTR_CHANNEL_ID]) {
> > > channel_id = nla_get_u32(info->attrs[NCSI_ATTR_CHANNEL_ID]);
> > > NCSI_FOR_EACH_CHANNEL(package, nc)
> > > - if (nc->id == channel_id)
> > > + if (nc->id == channel_id) {
> > > channel = nc;
> > > + break;
> > > + }
> > > + if (!channel) {
> > > + netdev_info(ndp->ndev.dev,
> > > + "NCSI: Channel %u does not exist!\n",
> > > + channel_id);
> > > + return -ERANGE;
> > > + }
> > > }
> > >
> > > - if (channel_id != NCSI_RESERVED_CHANNEL && !channel) {
> > > - /* The user has set a channel that does not exist on this
> > > - * package
> > > - */
> > > - spin_unlock_irqrestore(&ndp->lock, flags);
> > > - netdev_info(ndp->ndev.dev, "NCSI: Channel %u does not exist!\n",
> > > - channel_id);
> > > - return -ERANGE;
> > > - }
> > > -
> > > - ndp->force_package = package;
> > > - ndp->force_channel = channel;
> > > + spin_lock_irqsave(&ndp->lock, flags);
> > > + ndp->package_whitelist = 0x1 << package->id;
> > > + ndp->multi_package = false;
> > > spin_unlock_irqrestore(&ndp->lock, flags);
> > >
> > > - netdev_info(ndp->ndev.dev, "Set package 0x%x, channel 0x%x%s as preferred\n",
> > > - package_id, channel_id,
> > > - channel_id == NCSI_RESERVED_CHANNEL ? " (any)" : "");
> > > + spin_lock_irqsave(&package->lock, flags);
> > > + package->multi_channel = false;
> > > + if (channel) {
> > > + package->channel_whitelist = 0x1 << channel->id;
> > > + package->preferred_channel = channel;
> > > + } else {
> > > + /* Allow any channel */
> > > + package->channel_whitelist = UINT_MAX;
> > > + package->preferred_channel = NULL;
> > > + }
> > > + spin_unlock_irqrestore(&package->lock, flags);
> > > +
> > > + if (channel)
> > > + netdev_info(ndp->ndev.dev,
> > > + "Set package 0x%x, channel 0x%x as preferred\n",
> > > + package_id, channel_id);
> > > + else
> > > + netdev_info(ndp->ndev.dev, "Set package 0x%x as preferred\n",
> > > + package_id);
> > >
> > > /* Bounce the NCSI channel to set changes */
> > > ncsi_stop_dev(&ndp->ndev);
> > > @@ -338,6 +347,7 @@ static int ncsi_set_interface_nl(struct sk_buff *msg, struct genl_info *info)
> > > static int ncsi_clear_interface_nl(struct sk_buff *msg, struct genl_info *info)
> > > {
> > > struct ncsi_dev_priv *ndp;
> > > + struct ncsi_package *np;
> > > unsigned long flags;
> > >
> > > if (!info || !info->attrs)
> > > @@ -351,11 +361,19 @@ static int ncsi_clear_interface_nl(struct sk_buff *msg, struct genl_info *info)
> > > if (!ndp)
> > > return -ENODEV;
> > >
> > > - /* Clear any override */
> > > + /* Reset any whitelists and disable multi mode */
> > > spin_lock_irqsave(&ndp->lock, flags);
> > > - ndp->force_package = NULL;
> > > - ndp->force_channel = NULL;
> > > + ndp->package_whitelist = UINT_MAX;
> > > + ndp->multi_package = false;
> > > spin_unlock_irqrestore(&ndp->lock, flags);
> > > +
> > > + NCSI_FOR_EACH_PACKAGE(ndp, np) {
> > > + spin_lock_irqsave(&np->lock, flags);
> > > + np->multi_channel = false;
> > > + np->channel_whitelist = UINT_MAX;
> > > + np->preferred_channel = NULL;
> > > + spin_unlock_irqrestore(&np->lock, flags);
> > > + }
> > > netdev_info(ndp->ndev.dev, "NCSI: Cleared preferred package/channel\n");
> > >
> > > /* Bounce the NCSI channel to set changes */
> > > @@ -365,6 +383,137 @@ static int ncsi_clear_interface_nl(struct sk_buff *msg, struct genl_info *info)
> > > return 0;
> > > }
> > >
> > > +static int ncsi_set_package_mask_nl(struct sk_buff *msg,
> > > + struct genl_info *info)
> > > +{
> > > + struct ncsi_dev_priv *ndp;
> > > + unsigned long flags;
> > > + int rc;
> > > +
> > > + if (!info || !info->attrs)
> > > + return -EINVAL;
> > > +
> > > + if (!info->attrs[NCSI_ATTR_IFINDEX])
> > > + return -EINVAL;
> > > +
> > > + if (!info->attrs[NCSI_ATTR_PACKAGE_MASK])
> > > + return -EINVAL;
> > > +
> > > + ndp = ndp_from_ifindex(get_net(sock_net(msg->sk)),
> > > + nla_get_u32(info->attrs[NCSI_ATTR_IFINDEX]));
> > > + if (!ndp)
> > > + return -ENODEV;
> > > +
> > > + spin_lock_irqsave(&ndp->lock, flags);
> > > + ndp->package_whitelist =
> > > + nla_get_u32(info->attrs[NCSI_ATTR_PACKAGE_MASK]);
> > > +
> > > + if (nla_get_flag(info->attrs[NCSI_ATTR_MULTI_FLAG])) {
> > > + if (ndp->flags & NCSI_DEV_HWA) {
> > > + ndp->multi_package = true;
> > > + rc = 0;
> > > + } else {
> > > + netdev_err(ndp->ndev.dev,
> > > + "NCSI: Can't use multiple packages without HWA\n");
> > > + rc = -EPERM;
> > > + }
> > > + } else {
> > > + rc = 0;
> > > + }
If the flag is not set, do we need to clear the multi_package flag? It is possible that it is
user's intension to disable the multi-mode.
} else {
ndp->multi_package = false;
rc = 0;
}
> > > +
> > > + spin_unlock_irqrestore(&ndp->lock, flags);
> > > +
> > > + if (!rc) {
> > > + /* Bounce the NCSI channel to set changes */
> > > + ncsi_stop_dev(&ndp->ndev);
> > > + ncsi_start_dev(&ndp->ndev);
> >
> > Is it possible to delay the restart? If we have two packages, we might send
> > set_package_mask command once and set_channel_mask command twice.
> > We will see the unnecessary reconfigurations in a very short period time.
>
> We could probably do with a better way of bouncing the link here too. I
> suppose we could schedule the actual link 'bounce' to occur a second or
> two later, and delay if we receive new configuration in that time.
> Perhaps something outside of the scope of this patch though.
>
> >
> > > + }
> > > +
> > > + return rc;
> > > +}
> > > +
> > > +static int ncsi_set_channel_mask_nl(struct sk_buff *msg,
> > > + struct genl_info *info)
> > > +{
> > > + struct ncsi_package *np, *package;
> > > + struct ncsi_channel *nc, *channel;
> > > + struct ncsi_dev_priv *ndp;
> > > + unsigned long flags;
> > > + u32 package_id, channel_id;
All local variable declarations from longest to shortest
line.
> > > +
> > > + if (!info || !info->attrs)
> > > + return -EINVAL;
> > > +
> > > + if (!info->attrs[NCSI_ATTR_IFINDEX])
> > > + return -EINVAL;
> > > +
> > > + if (!info->attrs[NCSI_ATTR_PACKAGE_ID])
> > > + return -EINVAL;
> > > +
> > > + if (!info->attrs[NCSI_ATTR_CHANNEL_MASK])
> > > + return -EINVAL;
> > > +
> > > + ndp = ndp_from_ifindex(get_net(sock_net(msg->sk)),
> > > + nla_get_u32(info->attrs[NCSI_ATTR_IFINDEX]));
> > > + if (!ndp)
> > > + return -ENODEV;
> > > +
> > > + package_id = nla_get_u32(info->attrs[NCSI_ATTR_PACKAGE_ID]);
> > > + package = NULL;
> > > + NCSI_FOR_EACH_PACKAGE(ndp, np)
> > > + if (np->id == package_id) {
> > > + package = np;
> > > + break;
> > > + }
> > > + if (!package)
> > > + return -ERANGE;
> > > +
> > > + spin_lock_irqsave(&package->lock, flags);
> > > +
> > > + channel = NULL;
> > > + if (info->attrs[NCSI_ATTR_CHANNEL_ID]) {
> > > + channel_id = nla_get_u32(info->attrs[NCSI_ATTR_CHANNEL_ID]);
> > > + NCSI_FOR_EACH_CHANNEL(np, nc)
> > > + if (nc->id == channel_id) {
> > > + channel = nc;
> > > + break;
> > > + }
> > > + if (!channel) {
> > > + spin_unlock_irqrestore(&package->lock, flags);
> > > + return -ERANGE;
> > > + }
> > > + netdev_dbg(ndp->ndev.dev,
> > > + "NCSI: Channel %u set as preferred channel\n",
> > > + channel->id);
> > > + }
> > > +
> > > + package->channel_whitelist =
> > > + nla_get_u32(info->attrs[NCSI_ATTR_CHANNEL_MASK]);
> > > + if (package->channel_whitelist == 0)
> > > + netdev_dbg(ndp->ndev.dev,
> > > + "NCSI: Package %u set to all channels disabled\n",
> > > + package->id);
> > > +
> > > + package->preferred_channel = channel;
> > > +
> > > + if (nla_get_flag(info->attrs[NCSI_ATTR_MULTI_FLAG])) {
> > > + package->multi_channel = true;
> > > + netdev_info(ndp->ndev.dev,
> > > + "NCSI: Multi-channel enabled on package %u\n",
> > > + package_id);
> > > + } else {
> > > + package->multi_channel = false;
> > > + }
> > > +
> > > + spin_unlock_irqrestore(&package->lock, flags);
> > > +
> > > + /* Bounce the NCSI channel to set changes */
> > > + ncsi_stop_dev(&ndp->ndev);
> > > + ncsi_start_dev(&ndp->ndev);
> >
> > Same question as set_package_mask function.
> > Is it possible to delay the restart? If we have two packages, we might send
> > set_package_mask command once and set_channel_mask command twice.
> > We will see the unnecessary reconfigurations in a very short period time.
> >
> > > +
> > > + return 0;
> > > +}
> > > +
> > > static const struct genl_ops ncsi_ops[] = {
> > > {
> > > .cmd = NCSI_CMD_PKG_INFO,
> > > @@ -385,6 +534,18 @@ static const struct genl_ops ncsi_ops[] = {
> > > .doit = ncsi_clear_interface_nl,
> > > .flags = GENL_ADMIN_PERM,
> > > },
> > > + {
> > > + .cmd = NCSI_CMD_SET_PACKAGE_MASK,
> > > + .policy = ncsi_genl_policy,
> > > + .doit = ncsi_set_package_mask_nl,
> > > + .flags = GENL_ADMIN_PERM,
> > > + },
> > > + {
> > > + .cmd = NCSI_CMD_SET_CHANNEL_MASK,
> > > + .policy = ncsi_genl_policy,
> > > + .doit = ncsi_set_channel_mask_nl,
> > > + .flags = GENL_ADMIN_PERM,
> > > + },
> > > };
> > >
> > > static struct genl_family ncsi_genl_family __ro_after_init = {
> > > diff --git a/net/ncsi/ncsi-rsp.c b/net/ncsi/ncsi-rsp.c
> > > index d66b34749027..02ce7626b579 100644
> > > --- a/net/ncsi/ncsi-rsp.c
> > > +++ b/net/ncsi/ncsi-rsp.c
> > > @@ -241,7 +241,7 @@ static int ncsi_rsp_handler_dcnt(struct ncsi_request *nr)
> > > if (!ncm->enable)
> > > return 0;
> > >
> > > - ncm->enable = 1;
> > > + ncm->enable = 0;
> > > return 0;
> > > }
> > >
> > > --
> > > 2.19.0
> >
> >
More information about the openbmc
mailing list