[PATCH] clocksource/drivers/fttmr010: fix invalid interrupt register access

Tao Ren taoren at fb.com
Tue Oct 2 14:14:37 AEST 2018


TIMER_INTR_MASK register (Base Address of Timer + 0x38) is not designed
for masking interrupts on ast2500 chips, and it's not even listed in
ast2400 datasheet, so it's not safe to access TIMER_INTR_MASK on aspeed
chips.
Similarly, TIMER_INTR_STATE register (Base Address of Timer + 0x34) is
not interrupt status register on ast2400 and ast2500 chips. Although
there is no side effect to reset the register in fttmr010_common_init(),
it's just misleading to do so.

Signed-off-by: Tao Ren <taoren at fb.com>
---
 drivers/clocksource/timer-fttmr010.c | 27 ++++++++++++++-------------
 1 file changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/clocksource/timer-fttmr010.c b/drivers/clocksource/timer-fttmr010.c
index c020038ebfab..daf063c9842e 100644
--- a/drivers/clocksource/timer-fttmr010.c
+++ b/drivers/clocksource/timer-fttmr010.c
@@ -171,16 +171,17 @@ static int fttmr010_timer_set_oneshot(struct clock_event_device *evt)
 
 	/* Setup counter start from 0 or ~0 */
 	writel(0, fttmr010->base + TIMER1_COUNT);
-	if (fttmr010->count_down)
+	if (fttmr010->count_down) {
 		writel(~0, fttmr010->base + TIMER1_LOAD);
-	else
+	} else {
 		writel(0, fttmr010->base + TIMER1_LOAD);
 
-	/* Enable interrupt */
-	cr = readl(fttmr010->base + TIMER_INTR_MASK);
-	cr &= ~(TIMER_1_INT_OVERFLOW | TIMER_1_INT_MATCH2);
-	cr |= TIMER_1_INT_MATCH1;
-	writel(cr, fttmr010->base + TIMER_INTR_MASK);
+		/* Enable interrupt */
+		cr = readl(fttmr010->base + TIMER_INTR_MASK);
+		cr &= ~(TIMER_1_INT_OVERFLOW | TIMER_1_INT_MATCH2);
+		cr |= TIMER_1_INT_MATCH1;
+		writel(cr, fttmr010->base + TIMER_INTR_MASK);
+	}
 
 	return 0;
 }
@@ -287,13 +288,13 @@ static int __init fttmr010_common_init(struct device_node *np, bool is_aspeed)
 		fttmr010->count_down = true;
 	} else {
 		fttmr010->t1_enable_val = TIMER_1_CR_ENABLE | TIMER_1_CR_INT;
-	}
 
-	/*
-	 * Reset the interrupt mask and status
-	 */
-	writel(TIMER_INT_ALL_MASK, fttmr010->base + TIMER_INTR_MASK);
-	writel(0, fttmr010->base + TIMER_INTR_STATE);
+		/*
+		 * Reset the interrupt mask and status
+		 */
+		writel(TIMER_INT_ALL_MASK, fttmr010->base + TIMER_INTR_MASK);
+		writel(0, fttmr010->base + TIMER_INTR_STATE);
+	}
 
 	/*
 	 * Enable timer 1 count up, timer 2 count up, except on Aspeed,
-- 
2.17.1



More information about the openbmc mailing list