qemu does not work for the latest image?

[Yong Li]

Hi All,

 

Previously I can use qemu to test these built images, but it does not work
now and get the below error messages:

 

Just want to know if there is any command/options changes? Or it does not
support now?

 

qemu-system-arm -m 256 -M witherspoon-bmc -nographic -drive
file=tmp/deploy/images/witherspoon/obmc-phosphor-image-poon.ubi.mtd,format=r
aw,if=mtd

qemu-system-arm: Aspeed iBT has no chardev backend

 

 

U-Boot 2016.07 (Nov 15 2018 - 06:18:37 +0000)

 

       Watchdog enabled

DRAM:  240 MiB

Flash: 32 MiB

*** Warning - bad CRC, using default environment

 

In:    serial

Out:   serial

Err:   serial

Net:   aspeednic#0

Error: aspeednic#0 address not set.

 

Hit any key to stop autoboot:  0

ubi0: attaching mtd1

ubi0: scanning is finished

UBI init error 12

Error, no UBI device/partition selected!

Wrong Image Format for bootm command

ERROR: can't get kernel image!

 

 

Thanks,

Yong

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20181115/625dd9d1/attachment-0001.html>