[PATCH linux dev-4.13 04/10] fsi/fsi-master-gpio: More error handling cleanup
Benjamin Herrenschmidt
benh at kernel.crashing.org
Thu May 24 15:14:23 AEST 2018
Remove calls to the empty and useless fsi_master_gpio_error()
function, and report CRC errors as "FSI_ERR_NO_SLAVE" when
reading an all 1's response.
Signed-off-by: Benjamin Herrenschmidt <benh at kernel.crashing.org>
---
drivers/fsi/fsi-master-gpio.c | 26 +++++---------------------
1 file changed, 5 insertions(+), 21 deletions(-)
diff --git a/drivers/fsi/fsi-master-gpio.c b/drivers/fsi/fsi-master-gpio.c
index 351c12f2ac55..da556da62846 100644
--- a/drivers/fsi/fsi-master-gpio.c
+++ b/drivers/fsi/fsi-master-gpio.c
@@ -41,13 +41,6 @@
#define FSI_GPIO_RESP_BUSY 1 /* Slave busy */
#define FSI_GPIO_RESP_ERRA 2 /* Any (misc) Error */
#define FSI_GPIO_RESP_ERRC 3 /* Slave reports master CRC error */
-#define FSI_GPIO_MTOE 4 /* Master time out error */
-#define FSI_GPIO_CRC_INVAL 5 /* Master reports slave CRC error */
-
-/* Normal slave responses */
-#define FSI_GPIO_RESP_BUSY 1
-#define FSI_GPIO_RESP_ACK 0
-#define FSI_GPIO_RESP_ACKD 4
#define FSI_GPIO_MAX_BUSY 200
#define FSI_GPIO_MTOE_COUNT 1000
@@ -359,15 +352,6 @@ static void build_term_command(struct fsi_gpio_msg *cmd, uint8_t slave_id)
msg_push_crc(cmd);
}
-/*
- * Store information on master errors so handler can detect and clean
- * up the bus
- */
-static void fsi_master_gpio_error(struct fsi_master_gpio *master, int error)
-{
-
-}
-
/*
* Note: callers rely specifically on this returning -EAGAIN for
* a CRC error detected in the response. Use other error code
@@ -396,7 +380,6 @@ static int read_one_response(struct fsi_master_gpio *master,
if (i == FSI_GPIO_MTOE_COUNT) {
dev_dbg(master->dev,
"Master time out waiting for response\n");
- fsi_master_gpio_error(master, FSI_GPIO_MTOE);
spin_unlock_irqrestore(&master->bit_lock, flags);
return -ETIMEDOUT;
}
@@ -422,8 +405,11 @@ static int read_one_response(struct fsi_master_gpio *master,
crc = crc4(0, 1, 1);
crc = crc4(crc, msg.msg, msg.bits);
if (crc) {
- dev_dbg(master->dev, "ERR response CRC\n");
- fsi_master_gpio_error(master, FSI_GPIO_CRC_INVAL);
+ /* Check if it's all 1's, that probably means the host is off */
+ if (((~msg.msg) & ((1ull << msg.bits) - 1)) == 0)
+ return -ENODEV;
+ dev_dbg(master->dev, "ERR response CRC msg: 0x%016llx (%d bits)\n",
+ msg.msg, msg.bits);
return -EAGAIN;
}
@@ -538,12 +524,10 @@ static int poll_for_response(struct fsi_master_gpio *master,
case FSI_GPIO_RESP_ERRA:
dev_dbg(master->dev, "ERRA received: 0x%x\n", (int)response.msg);
- fsi_master_gpio_error(master, response.msg);
rc = -EIO;
break;
case FSI_GPIO_RESP_ERRC:
dev_dbg(master->dev, "ERRC received: 0x%x\n", (int)response.msg);
- fsi_master_gpio_error(master, response.msg);
trace_fsi_master_gpio_crc_cmd_error(master);
rc = -EAGAIN;
break;
--
2.17.0
More information about the openbmc
mailing list