[PATCH linux dev-4.13 2/2] ARM: dts: aspeed: Use 24MHz fixed clock for pwm

[Lei YU]

The aspeed pwm driver always sets the clock source to 24MHz, specify
the fixed clock in device tree to make sure the driver is using the
correct clock frequency to calculate the fan speed.

Signed-off-by: Lei YU <mine260309 at gmail.com>
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 2 +-
 arch/arm/boot/dts/aspeed-g5.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 50bc661..9354ac9 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -201,7 +201,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x1e786000 0x1000>;
-				clocks = <&syscon ASPEED_CLK_APB>;
+				clocks = <&syscon ASPEED_CLK_24M>;
 				resets = <&syscon ASPEED_RESET_PWM>;
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index e9e039a..0633162 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -259,7 +259,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x1e786000 0x1000>;
-				clocks = <&syscon ASPEED_CLK_APB>;
+				clocks = <&syscon ASPEED_CLK_24M>;
 				resets = <&syscon ASPEED_RESET_PWM>;
 				status = "disabled";
 			};
-- 
2.7.4