Unknown command gpio in u-boot

[AKASH G J]

The BMC I used is Aspeed ast-2500 and GPIO I want to control is GPIOB0.

On Mon, Jun 25, 2018 at 3:14 PM, Paul Menzel <pmenzel at molgen.mpg.de> wrote:

> Dear Akash,
>
>
> On 06/25/18 11:42, AKASH G J wrote:
>
> > I tried to reset one GPIO using 'gpio' command in u-boot 2016.07. But it
> is
> > showing error "unknown command gpio". Please someone help, how to control
> > GPIO through u-boot.
>
> Please tell us the board and the GPIO you tried to set with the exact
> command.
>
>
> Kind regards,
>
> Paul
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20180625/6e5039d9/attachment.html>