[PATCH v6 1/3] USB host: Add USB ehci support for nuvoton npcm7xx platform

[Alan Stern]

On Tue, 19 Jun 2018 avifishman70 at gmail.com wrote:

> From: Avi Fishman <AviFishman70 at gmail.com>
> 
> This patch adds support for ehci controller for the Nuvoton
> npcm7xx platform.
> Most of the code was taken from ehci-spear.c + specific initialization
> code
> 
> Signed-off-by: Avi Fishman <AviFishman70 at gmail.com>
> ---
>  drivers/usb/host/Kconfig        |   8 ++
>  drivers/usb/host/Makefile       |   1 +
>  drivers/usb/host/ehci-npcm7xx.c | 212 ++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 221 insertions(+)
>  create mode 100644 drivers/usb/host/ehci-npcm7xx.c
> 
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 9f0aeb068acb..e3100b249f0f 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -185,6 +185,14 @@ config USB_EHCI_MXC
>  	---help---
>  	  Variation of ARC USB block used in some Freescale chips.
>  
> +config USB_EHCI_HCD_NPCM7XX
> +	tristate "Support for Nuvoton NPCM7XX on-chip EHCI USB controller"
> +	depends on (USB_EHCI_HCD && ARCH_NPCM7XX) || COMPILE_TEST
> +	default y

Are you sure this is what you want?  The value defaults to Y whenever 
COMPILE_TEST is enabled?  Will that annoy people doing compile tests?

Aside from that one issue,

Acked-by: Alan Stern <stern at rowland.harvard.edu>

Alan Stern