[PATCH] i2c: aspeed: Add newline characters into message printings.

Jae Hyun Yoo jae.hyun.yoo at linux.intel.com
Thu Jul 12 02:53:45 AEST 2018


On 7/10/2018 10:42 PM, Brendan Higgins wrote:
> On Mon, Jul 2, 2018 at 2:14 PM Jae Hyun Yoo
> <jae.hyun.yoo at linux.intel.com> wrote:
>>
>> There are some log printing without a newline character. This
>> patch adds the missing newline characters.
>>
>> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo at linux.intel.com>
>> ---
>>   drivers/i2c/busses/i2c-aspeed.c | 18 +++++++++---------
>>   1 file changed, 9 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
>> index 60e4d0e939a3..e3007c1c4ac5 100644
>> --- a/drivers/i2c/busses/i2c-aspeed.c
>> +++ b/drivers/i2c/busses/i2c-aspeed.c
>> @@ -407,7 +407,7 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
>>           */
>>          ret = aspeed_i2c_is_irq_error(irq_status);
>>          if (ret < 0) {
>> -               dev_dbg(bus->dev, "received error interrupt: 0x%08x",
>> +               dev_dbg(bus->dev, "received error interrupt: 0x%08x\n",
>>                          irq_status);
>>                  bus->cmd_err = ret;
>>                  bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
>> @@ -416,7 +416,7 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
>>
>>          /* We are in an invalid state; reset bus to a known state. */
>>          if (!bus->msgs) {
>> -               dev_err(bus->dev, "bus in unknown state");
>> +               dev_err(bus->dev, "bus in unknown state\n");
>>                  bus->cmd_err = -EIO;
>>                  if (bus->master_state != ASPEED_I2C_MASTER_STOP)
>>                          aspeed_i2c_do_stop(bus);
>> @@ -431,7 +431,7 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
>>           */
>>          if (bus->master_state == ASPEED_I2C_MASTER_START) {
>>                  if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
>> -                       pr_devel("no slave present at %02x", msg->addr);
>> +                       pr_devel("no slave present at %02x\n", msg->addr);
> 
> Unless something changed in the last couple versions of the kernel, this is the
> only line that actually changes anything. dev_* inserts a newline for every
> call.
> 
> Admittedly, the rest of the file is pretty inconsistent, so if you really want
> to make all these changes, I don't feel super strongly about it.
> 

Agreed. Will drop this patch.

Thanks,

Jae

>>                          status_ack |= ASPEED_I2CD_INTR_TX_NAK;
>>                          bus->cmd_err = -ENXIO;
>>                          aspeed_i2c_do_stop(bus);
>> @@ -451,11 +451,11 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
>>          switch (bus->master_state) {
>>          case ASPEED_I2C_MASTER_TX:
>>                  if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_NAK)) {
>> -                       dev_dbg(bus->dev, "slave NACKed TX");
>> +                       dev_dbg(bus->dev, "slave NACKed TX\n");
>>                          status_ack |= ASPEED_I2CD_INTR_TX_NAK;
>>                          goto error_and_stop;
>>                  } else if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
>> -                       dev_err(bus->dev, "slave failed to ACK TX");
>> +                       dev_err(bus->dev, "slave failed to ACK TX\n");
>>                          goto error_and_stop;
>>                  }
>>                  status_ack |= ASPEED_I2CD_INTR_TX_ACK;
>> @@ -478,7 +478,7 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
>>                  /* fallthrough intended */
>>          case ASPEED_I2C_MASTER_RX:
>>                  if (unlikely(!(irq_status & ASPEED_I2CD_INTR_RX_DONE))) {
>> -                       dev_err(bus->dev, "master failed to RX");
>> +                       dev_err(bus->dev, "master failed to RX\n");
>>                          goto error_and_stop;
>>                  }
>>                  status_ack |= ASPEED_I2CD_INTR_RX_DONE;
>> @@ -509,7 +509,7 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
>>                  goto out_no_complete;
>>          case ASPEED_I2C_MASTER_STOP:
>>                  if (unlikely(!(irq_status & ASPEED_I2CD_INTR_NORMAL_STOP))) {
>> -                       dev_err(bus->dev, "master failed to STOP");
>> +                       dev_err(bus->dev, "master failed to STOP\n");
>>                          bus->cmd_err = -EIO;
>>                          /* Do not STOP as we have already tried. */
>>                  } else {
>> @@ -520,7 +520,7 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
>>                  goto out_complete;
>>          case ASPEED_I2C_MASTER_INACTIVE:
>>                  dev_err(bus->dev,
>> -                       "master received interrupt 0x%08x, but is inactive",
>> +                       "master received interrupt 0x%08x, but is inactive\n",
>>                          irq_status);
>>                  bus->cmd_err = -EIO;
>>                  /* Do not STOP as we should be inactive. */
>> @@ -851,7 +851,7 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev)
>>          bus->rst = devm_reset_control_get_shared(&pdev->dev, NULL);
>>          if (IS_ERR(bus->rst)) {
>>                  dev_err(&pdev->dev,
>> -                       "missing or invalid reset controller device tree entry");
>> +                       "missing or invalid reset controller device tree entry\n");
>>                  return PTR_ERR(bus->rst);
>>          }
>>          reset_control_deassert(bus->rst);
>> --
>> 2.17.1
>>
> 
> Reviewed-by: Brendan Higgins <brendanhiggins at google.com>
> 


More information about the openbmc mailing list