[PATCH linux dev-4.17 5/7] mmc: Aspeed: Add driver for Aspeed sdhci
Joel Stanley
joel at jms.id.au
Wed Jul 11 15:32:24 AEST 2018
On 11 July 2018 at 15:17, Ryan Chen <ryanchen.aspeed at gmail.com> wrote:
> Add a driver for Aspeed's sdhci controller core.
This looks good. You should add some more description of the sdhci
core. eg. it supports two slots, the different modes it supports, etc.
>
> Signed-off-by: Ryan Chen <ryanchen.aspeed at gmail.com>
> ---
> drivers/mmc/host/Kconfig | 12 +++
> drivers/mmc/host/Makefile | 1 +
> drivers/mmc/host/sdhci-of-aspeed.c | 178 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 191 insertions(+)
> create mode 100644 drivers/mmc/host/sdhci-of-aspeed.c
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 9589f9c..5056e6e 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -142,6 +142,18 @@ config MMC_SDHCI_OF_ARASAN
>
> If unsure, say N.
>
> +config MMC_SDHCI_OF_ASPEED
> + tristate "SDHCI OF support for the ASPEED SDHCI controller"
> + depends on MMC_SDHCI_PLTFM
> + depends on OF
> + help
> + This selects the ASPEED Secure Digital Host Controller Interface.
> +
> + If you have a controller with this interface, say Y or M here. You
> + also need to enable an appropriate bus interface.
> +
> + If unsure, say N.
> +
> config MMC_SDHCI_OF_AT91
> tristate "SDHCI OF support for the Atmel SDMMC controller"
> depends on MMC_SDHCI_PLTFM
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index 6aead24..084193b 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -78,6 +78,7 @@ obj-$(CONFIG_MMC_SDHCI_ESDHC_IMX) += sdhci-esdhc-imx.o
> obj-$(CONFIG_MMC_SDHCI_DOVE) += sdhci-dove.o
> obj-$(CONFIG_MMC_SDHCI_TEGRA) += sdhci-tegra.o
> obj-$(CONFIG_MMC_SDHCI_OF_ARASAN) += sdhci-of-arasan.o
> +obj-$(CONFIG_MMC_SDHCI_OF_ASPEED) += sdhci-of-aspeed.o
> obj-$(CONFIG_MMC_SDHCI_OF_AT91) += sdhci-of-at91.o
> obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o
> obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o
> diff --git a/drivers/mmc/host/sdhci-of-aspeed.c b/drivers/mmc/host/sdhci-of-aspeed.c
> new file mode 100644
> index 0000000..8e609e1
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-of-aspeed.c
> @@ -0,0 +1,178 @@
> +// SPDX-License-Identifier: GPL-2.0
This text here replaces the text below.
You can have your headers look something like:
// SPDX-License-Identifier: GPL-2.0
// Copyright (C) Some Company Ltd
Some people chose to omit it, but you can also have:
// Author's name <email>
> +/*
> + * ASPEED Secure Digital Host Controller Interface.
> + * Copyright (C) ASPEED Technology Inc.
> + * Ryan Chen <ryan_chen at aspeedtech.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or (at
> + * your option) any later version.
> + *
> + */
> +
> +#include <linux/dma-mapping.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/mmc/host.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_gpio.h>
> +#include <linux/mmc/sdhci-aspeed-data.h>
> +#include <linux/reset.h>
> +#include "sdhci-pltfm.h"
> +
> +static void sdhci_aspeed_set_clock(struct sdhci_host *host, unsigned int clock)
> +{
> + int div;
> + u16 clk;
> + unsigned long timeout;
> +
> + if (clock == host->clock)
> + return;
> +
> + sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
> +
> + if (clock == 0)
> + goto out;
> +
> + for (div = 1; div < 256; div *= 2) {
> + if ((host->max_clk / div) <= clock)
> + break;
> + }
> + div >>= 1;
> +
> + clk = div << SDHCI_DIVIDER_SHIFT;
> + clk |= SDHCI_CLOCK_INT_EN;
> + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
> +
> + /* Wait max 20 ms */
> + timeout = 20;
> + while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
> + & SDHCI_CLOCK_INT_STABLE)) {
> + if (timeout == 0) {
> + pr_err("%s: Internal clock never stabilised.\n",
> + mmc_hostname(host->mmc));
> + return;
> + }
> + timeout--;
> + mdelay(1);
> + }
> +
> + clk |= SDHCI_CLOCK_CARD_EN;
> + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
> +
> +out:
> + host->clock = clock;
> +}
> +
> +static void sdhci_aspeed_set_bus_width(struct sdhci_host *host, int width)
> +{
> + struct sdhci_pltfm_host *pltfm_priv = sdhci_priv(host);
> + struct aspeed_sdhci_irq *sdhci_irq = sdhci_pltfm_priv(pltfm_priv);
> +
> + u8 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
> +
> + if (sdhci_irq->regs) {
> + if (width == MMC_BUS_WIDTH_8)
> + aspeed_sdhci_set_8bit_mode(sdhci_irq, 1);
> + else
> + aspeed_sdhci_set_8bit_mode(sdhci_irq, 0);
> + }
> + if (width == MMC_BUS_WIDTH_4)
> + ctrl |= SDHCI_CTRL_4BITBUS;
> + else
> + ctrl &= ~SDHCI_CTRL_4BITBUS;
> +
> + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
> +
> +}
> +
> +static struct sdhci_ops sdhci_aspeed_ops = {
> + .set_clock = sdhci_aspeed_set_clock,
> + .get_max_clock = sdhci_pltfm_clk_get_max_clock,
> + .set_bus_width = sdhci_aspeed_set_bus_width,
> + .get_timeout_clock = sdhci_pltfm_clk_get_max_clock,
> + .reset = sdhci_reset,
> + .set_uhs_signaling = sdhci_set_uhs_signaling,
> +};
> +
> +static struct sdhci_pltfm_data sdhci_aspeed_pdata = {
> + .ops = &sdhci_aspeed_ops,
> + .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
> + .quirks2 = SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN,
> +};
> +
> +static int sdhci_aspeed_probe(struct platform_device *pdev)
> +{
> + struct sdhci_host *host;
> + struct device_node *pnode;
> + struct device_node *np = pdev->dev.of_node;
> + struct sdhci_pltfm_host *pltfm_host;
> + struct aspeed_sdhci_irq *sdhci_irq;
> +
> + int ret;
> +
> + host = sdhci_pltfm_init(pdev, &sdhci_aspeed_pdata, sizeof(struct aspeed_sdhci_irq));
> + if (IS_ERR(host))
> + return PTR_ERR(host);
> +
> + pltfm_host = sdhci_priv(host);
> + sdhci_irq = sdhci_pltfm_priv(pltfm_host);
> +
> + sdhci_get_of_property(pdev);
> +
> + pltfm_host->clk = devm_clk_get(&pdev->dev, NULL);
> +
> + pnode = of_parse_phandle(np, "interrupt-parent", 0);
> + if (pnode)
> + memcpy(sdhci_irq, pnode->data, sizeof(struct aspeed_sdhci_irq));
> +
> + ret = mmc_of_parse(host->mmc);
> + if (ret)
> + goto err_sdhci_add;
> +
> + ret = sdhci_add_host(host);
> + if (ret)
> + goto err_sdhci_add;
> +
> + return 0;
> +
> +err_sdhci_add:
> + sdhci_pltfm_free(pdev);
> + return ret;
> +}
> +
> +static int sdhci_aspeed_remove(struct platform_device *pdev)
> +{
> + struct sdhci_host *host = platform_get_drvdata(pdev);
> + int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
> +
> + sdhci_remove_host(host, dead);
> + sdhci_pltfm_free(pdev);
> + return 0;
> +}
> +
> +static const struct of_device_id sdhci_aspeed_of_match[] = {
> + { .compatible = "aspeed,sdhci-ast2400", .data = &sdhci_aspeed_pdata },
> + { .compatible = "aspeed,sdhci-ast2500", .data = &sdhci_aspeed_pdata },
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(of, sdhci_aspeed_of_match);
> +
> +static struct platform_driver sdhci_aspeed_driver = {
> + .driver = {
> + .name = "sdhci-aspeed",
> + .pm = &sdhci_pltfm_pmops,
> + .of_match_table = sdhci_aspeed_of_match,
> + },
> + .probe = sdhci_aspeed_probe,
> + .remove = sdhci_aspeed_remove,
> +};
> +
> +module_platform_driver(sdhci_aspeed_driver);
> +
> +MODULE_DESCRIPTION("Driver for the ASPEED SDHCI Controller");
> +MODULE_AUTHOR("Ryan Chen <ryan_chen at aspeedtech.com>");
> +MODULE_LICENSE("GPL v2");
> --
> 2.7.4
>
More information about the openbmc
mailing list