[PATCH arm/aspeed/ast2500 v2] eSPI: add ASPEED AST2500 eSPI driver to boot a host with PCH runs on eSPI
Wang, Haiyue
haiyue.wang at linux.intel.com
Sat Feb 24 00:19:16 AEDT 2018
On 2018-02-23 18:25, Andy Shevchenko wrote:
> On Fri, 2018-02-23 at 15:04 +0800, Haiyue Wang wrote:
>> When PCH works under eSPI mode, the PMC (Power Management Controller)
>> in
>> PCH is waiting for SUS_ACK from BMC after it alerts SUS_WARN. It is in
>> dead loop if no SUS_ACK assert. This is the basic requirement for the
>> BMC
>> works as eSPI slave.
> So, do we have an agreement that the driver should go in this shape w/o
> interacting with SPI subsystem?
Not sure, I've added the specification of eSPI, hope people don't feel
confused with SPI. :-)
> Also few comments below.
>
>> +config ASPEED_ESPI_SLAVE
>> + depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP_MMIO
> I would rather split this to two
> depends on REGMAP_MMIO
> depends on ARCH_ASPEED || COMPILE_TEST
OK, it looks clean. I referred to:
config ASPEED_LPC_CTRL
depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON
>> + tristate "Aspeed ast2500 eSPI slave device driver"
>> + ---help---
>> + Control Aspeed ast2500 eSPI slave controller to handle
>> event
>> + which needs the firmware's processing.
>> +#include <linux/of.h>
> What exactly requires this header?
Oh, I ctrl+c / ctrl+v from other device tree usage module. :-(
Remove it now. Thanks for making the code more clean.
>> +static int aspeed_espi_slave_probe(struct platform_device *pdev)
>> +{
>> + struct aspeed_espi_slave_data *priv;
>> + struct device *dev = &pdev->dev;
>> + struct resource *res;
>> + void __iomem *regs;
>> + int rc;
>> +
>> + dev_set_name(dev, DEVICE_NAME);
> Do this after checks and memory allocations.
Fixed!
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + regs = devm_ioremap_resource(dev, res);
>> + if (IS_ERR(regs))
>> + return PTR_ERR(regs);
>> +
>> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
>> + if (!priv)
>> + return -ENOMEM;
>> +
>> + priv->map = devm_regmap_init_mmio(dev, regs,
>> &espi_slave_regmap_cfg);
>> + if (IS_ERR(priv->map))
>> + return PTR_ERR(priv->map);
>> +
>> +static const struct of_device_id of_espi_slave_match_table[] = {
>> + { .compatible = "aspeed,ast2500-espi-slave" },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(of, of_espi_slave_match_table);
> This one should be closer to the struct of_device_id.
Fixed.
More information about the openbmc
mailing list