[PATCH v1 0/2] SPI-NOR add NPCM FIU controller driver

[Tomer Maimon]

Hi Boris,



Thanks for getting back to me on this driver.


A few comments/input:


   1. We have been working on this driver for quite a long time to port it
   to the latest Linux conventions, polish the code, run tests and reach high
   quality.
   Our partners and customers are waiting to get this driver upstream so
   they can freely use it.
   Since this driver is already in final stages and is in very good shape
   we will appreciate if you can review this specific driver/interface and
   help us to upstream it.
   2.  As for the new interface, we are open for any discussion and for
   porting the driver as required.
   We are unsure what is this specific interface and weather it really fits
   a driver for a Flash Interface Controller module (rather than a SPI flash
   device).
   Is it possible to get a sample driver from another Flash Interface
   Controller module that was ported to this new interface ?
   Based on this we can evaluate the required effort and assign it
   accordingly.

Regards,

Tomer


On Mon, 3 Dec 2018 at 11:22, Boris Brezillon <boris.brezillon at bootlin.com>
wrote:

> On Mon,  3 Dec 2018 11:14:54 +0200
> Tomer Maimon <tmaimon77 at gmail.com> wrote:
>
> > This patch set adds Flash Interface Unit(FIU) SPI-NOR
> > support for the Nuvoton NPCM Baseboard Management
> > Controller (BMC).
> >
> > The FIU supports single, dual or quad communication interface.
> >
> > the FIU controller can operate in following modes:
> > - User Mode Access(UMA): provides flash access by using an
> >   indirect address/data mechanism.
> > - direct rd/wr mode: maps the flash memory into the core
> >   address space.
> > - SPI-X mode: used for an expansion bus to an ASIC or CPLD.
> >
> > The NPCM750/730/715/710 supports up to three FIU devices:
> > - FIU0 supports two chip select.
> > - FIU3 supports four chip select.
> > - FIUX supports two chip select.
> >
> > The NPCM FIU driver tested on NPCM750 evaluation board.
> >
> > Tomer Maimon (2):
> >   dt-binding: mtd: add NPCM FIU controller
> >   mtd: spi-nor: add NPCM FIU controller driver
> >
> >  Documentation/devicetree/bindings/mtd/npcm-fiu.txt |  64 ++
> >  drivers/mtd/spi-nor/Kconfig                        |   8 +
> >  drivers/mtd/spi-nor/Makefile                       |   1 +
> >  drivers/mtd/spi-nor/npcm-fiu.c                     | 930
> +++++++++++++++++++++
>
> We are currently trying to move all SPI NOR controller drivers out of
> drivers/mtd/spi-nor. Can you try to implement the spi-mem interface [1]
> and place your driver in drivers/spi/.
>
> [1]
> https://elixir.bootlin.com/linux/v4.20-rc5/source/include/linux/spi/spi-mem.h#L185
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20181203/e19624cf/attachment.html>