[HELP] ipmi-kcs didn't work

[Jae Hyun Yoo]

On 11/29/2018 9:00 PM, Samuel Jiang wrote:
> Hi Jae,
> 
> We also encountered the same situation a month ago.
> We try to enable the LPC clock on devicetree to resolve this problem not 
> direct modify clock driver.
> 
> lpc_ctrl: lpc-ctrl at 0 {
>   compatible = "aspeed,ast2500-lpc-ctrl”;
>   reg = <0x0 0x80>;
>   clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
>      status = “okay”;
> };
> 
> However, I’m not sure which is better for LPC_CLCK setting.
> Whether we should modify driver if original data is enabled or should 
> enable on the device tree, correct?
> 
> 

Hi Samuel,

Yes, you are right. I realized that kcs_bmc_aspeed.c doesn't have any
clock control code so adding a clocks setting into kcs dtsi code doesn't
make any help. Also, it was the reason why the change is needed on
clk-aspeed.c. Enabling lpc_ctrl node you suggested seems a right way.

Hi Vijay,
Can you please try the way Samuel suggested after removing changes I
gave you. Samuel's solution looks good to me.

Thanks,
Jae

> Thanks,
> 
> Samuel Jiang
> On Nov 30, 2018, 2:58 AM +0800, Jae Hyun Yoo 
> <jae.hyun.yoo at linux.intel.com>, wrote:
>> On 11/29/2018 12:42 PM, Vijay Khemka wrote:
>>> Try below fix on clk-aspeed.c
>>>
>>> diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c
>>> index 596136793fc4..b55d35e3eb5e 100644
>>> --- a/drivers/clk/clk-aspeed.c
>>> +++ b/drivers/clk/clk-aspeed.c
>>> @@ -95,7 +95,7 @@ static const struct aspeed_gate_data aspeed_gates[] = {
>>> [ASPEED_CLK_GATE_DCLK] = { 5, -1, "dclk-gate",
>>> NULL, CLK_IS_CRITICAL }, /* DAC */
>>> [ASPEED_CLK_GATE_REFCLK] = { 6, -1, "refclk-gate",
>>> "clkin", CLK_IS_CRITICAL },
>>> [ASPEED_CLK_GATE_USBPORT2CLK] = { 7, 3, "usb-port2-gate",
>>> NULL, 0 }, /* USB2.0 Host port 2 */
>>> - [ASPEED_CLK_GATE_LCLK] = { 8, 5, "lclk-gate",
>>> NULL, 0 }, /* LPC */
>>> + [ASPEED_CLK_GATE_LCLK] = { 8, 5, "lclk-gate",
>>> NULL, CLK_IS_CRITICAL }, /* LPC */
>>> [ASPEED_CLK_GATE_USBUHCICLK] = { 9, 15, "usb-uhci-gate",
>>> NULL, 0 }, /* USB1.1 (requires port 2 enabled) */
>>> [ASPEED_CLK_GATE_D1CLK] = { 10, 13, "d1clk-gate",
>>> NULL, 0 }, /* GFX CRT */
>>> [ASPEED_CLK_GATE_YCLK] = { 13, 4, "yclk-gate",
>>> NULL, 0 }, /* HAC */
>>>
>>> In my experiments on my system, LCLK was not enabled due to the null
>>> parent dependency so I added CLK_IS_CRITICAL flag to enable the clk.
>>>
>>> LPC interface is default pin pad setting of AST2500 so you might not
>>> need a pinctrl setting on it if you didn't change it's pin pads to GPIO
>>> or eSPI.
>>>
>>> Cheers,
>>> Jae
>>>
>>> Jae,
>>> Are you planning to upstream this patch as it is needed for kcsbridge 
>>> to work. Also aspeed-g5 dtsi file.
>>
>> Okay, I'll submit this patch and dtsi patch to community.
>>
>> Thanks,
>> Jae
>>
>>>
>>> Regards
>>> -Vijay
>>>
>>>