[PATCH v2 0/2] i2c: npcm7xx: new driver for I2C controller

[Tali Perry]

Nuvoton NPCM7XX I2C Controller
NPCM7xx includes 16 I2C contollers. THis driver operates the controller.
This module also includes a slave mode, which will be submitted later on.

Any feedback would be appreciated.  

v2 -> v1:
	- run check patch in strict mode.
	- use linux crc.
	- define regs in constant offset without base.
	- remove debug prints.
	- no declerations for local functions.
	
v1: initial version

Signed-off-by: Tali Perry <tali.perry1 at gmail.com>

---
Tali Perry (2):
  dt-binding: i2c: npcm7xx: add binding for i2c controller
  i2c: npcm7xx: add i2c controller master mode only

 .../devicetree/bindings/i2c/i2c-npcm7xx.txt        |   27 +
 MAINTAINERS                                        |    8 +
 drivers/i2c/busses/Kconfig                         |   11 +
 drivers/i2c/busses/Makefile                        |    1 +
 drivers/i2c/busses/i2c-npcm7xx.c                   | 2017 ++++++++++++++++++++
 5 files changed, 2064 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-npcm7xx.txt
 create mode 100644 drivers/i2c/busses/i2c-npcm7xx.c

-- 
2.14.1