[PATCH v3 06/10] drivers/peci: Add a PECI adapter driver for Aspeed AST24xx/AST25xx
Joel Stanley
joel at jms.id.au
Wed Apr 11 21:51:43 AEST 2018
Hello Jae,
On 11 April 2018 at 04:02, Jae Hyun Yoo <jae.hyun.yoo at linux.intel.com> wrote:
> This commit adds PECI adapter driver implementation for Aspeed
> AST24xx/AST25xx.
The driver is looking good!
It looks like you've done some kind of review that we weren't allowed
to see, which is a double edged sword - I might be asking about things
that you've already spoken about with someone else.
I'm only just learning about PECI, but I do have some general comments below.
> ---
> drivers/peci/Kconfig | 28 +++
> drivers/peci/Makefile | 3 +
> drivers/peci/peci-aspeed.c | 504 +++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 535 insertions(+)
> create mode 100644 drivers/peci/peci-aspeed.c
>
> diff --git a/drivers/peci/Kconfig b/drivers/peci/Kconfig
> index 1fbc13f9e6c2..0e33420365de 100644
> --- a/drivers/peci/Kconfig
> +++ b/drivers/peci/Kconfig
> @@ -14,4 +14,32 @@ config PECI
> processors and chipset components to external monitoring or control
> devices.
>
> + If you want PECI support, you should say Y here and also to the
> + specific driver for your bus adapter(s) below.
> +
> +if PECI
> +
> +#
> +# PECI hardware bus configuration
> +#
> +
> +menu "PECI Hardware Bus support"
> +
> +config PECI_ASPEED
> + tristate "Aspeed AST24xx/AST25xx PECI support"
I think just saying ASPEED PECI support is enough. That way if the
next ASPEED SoC happens to have PECI we don't need to update all of
the help text :)
> + select REGMAP_MMIO
> + depends on OF
> + depends on ARCH_ASPEED || COMPILE_TEST
> + help
> + Say Y here if you want support for the Platform Environment Control
> + Interface (PECI) bus adapter driver on the Aspeed AST24XX and AST25XX
> + SoCs.
> +
> + This support is also available as a module. If so, the module
> + will be called peci-aspeed.
> +
> +endmenu
> +
> +endif # PECI
> +
> endmenu
> diff --git a/drivers/peci/Makefile b/drivers/peci/Makefile
> index 9e8615e0d3ff..886285e69765 100644
> --- a/drivers/peci/Makefile
> +++ b/drivers/peci/Makefile
> @@ -4,3 +4,6 @@
>
> # Core functionality
> obj-$(CONFIG_PECI) += peci-core.o
> +
> +# Hardware specific bus drivers
> +obj-$(CONFIG_PECI_ASPEED) += peci-aspeed.o
> diff --git a/drivers/peci/peci-aspeed.c b/drivers/peci/peci-aspeed.c
> new file mode 100644
> index 000000000000..be2a1f327eb1
> --- /dev/null
> +++ b/drivers/peci/peci-aspeed.c
> @@ -0,0 +1,504 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (C) 2012-2017 ASPEED Technology Inc.
> +// Copyright (c) 2018 Intel Corporation
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/jiffies.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/peci.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +#define DUMP_DEBUG 0
> +
> +/* Aspeed PECI Registers */
> +#define AST_PECI_CTRL 0x00
Nit: we use ASPEED instead of AST in the upstream kernel to distingush
from the aspeed sdk drivers. If you feel strongly about this then I
won't insist you change.
> +#define AST_PECI_TIMING 0x04
> +#define AST_PECI_CMD 0x08
> +#define AST_PECI_CMD_CTRL 0x0c
> +#define AST_PECI_EXP_FCS 0x10
> +#define AST_PECI_CAP_FCS 0x14
> +#define AST_PECI_INT_CTRL 0x18
> +#define AST_PECI_INT_STS 0x1c
> +#define AST_PECI_W_DATA0 0x20
> +#define AST_PECI_W_DATA1 0x24
> +#define AST_PECI_W_DATA2 0x28
> +#define AST_PECI_W_DATA3 0x2c
> +#define AST_PECI_R_DATA0 0x30
> +#define AST_PECI_R_DATA1 0x34
> +#define AST_PECI_R_DATA2 0x38
> +#define AST_PECI_R_DATA3 0x3c
> +#define AST_PECI_W_DATA4 0x40
> +#define AST_PECI_W_DATA5 0x44
> +#define AST_PECI_W_DATA6 0x48
> +#define AST_PECI_W_DATA7 0x4c
> +#define AST_PECI_R_DATA4 0x50
> +#define AST_PECI_R_DATA5 0x54
> +#define AST_PECI_R_DATA6 0x58
> +#define AST_PECI_R_DATA7 0x5c
> +
> +/* AST_PECI_CTRL - 0x00 : Control Register */
> +#define PECI_CTRL_SAMPLING_MASK GENMASK(19, 16)
> +#define PECI_CTRL_SAMPLING(x) (((x) << 16) & PECI_CTRL_SAMPLING_MASK)
> +#define PECI_CTRL_SAMPLING_GET(x) (((x) & PECI_CTRL_SAMPLING_MASK) >> 16)
> +#define PECI_CTRL_READ_MODE_MASK GENMASK(13, 12)
> +#define PECI_CTRL_READ_MODE(x) (((x) << 12) & PECI_CTRL_READ_MODE_MASK)
> +#define PECI_CTRL_READ_MODE_GET(x) (((x) & PECI_CTRL_READ_MODE_MASK) >> 12)
> +#define PECI_CTRL_READ_MODE_COUNT BIT(12)
> +#define PECI_CTRL_READ_MODE_DBG BIT(13)
> +#define PECI_CTRL_CLK_SOURCE_MASK BIT(11)
> +#define PECI_CTRL_CLK_SOURCE(x) (((x) << 11) & PECI_CTRL_CLK_SOURCE_MASK)
> +#define PECI_CTRL_CLK_SOURCE_GET(x) (((x) & PECI_CTRL_CLK_SOURCE_MASK) >> 11)
> +#define PECI_CTRL_CLK_DIV_MASK GENMASK(10, 8)
> +#define PECI_CTRL_CLK_DIV(x) (((x) << 8) & PECI_CTRL_CLK_DIV_MASK)
> +#define PECI_CTRL_CLK_DIV_GET(x) (((x) & PECI_CTRL_CLK_DIV_MASK) >> 8)
> +#define PECI_CTRL_INVERT_OUT BIT(7)
> +#define PECI_CTRL_INVERT_IN BIT(6)
> +#define PECI_CTRL_BUS_CONTENT_EN BIT(5)
> +#define PECI_CTRL_PECI_EN BIT(4)
> +#define PECI_CTRL_PECI_CLK_EN BIT(0)
I know these come from the ASPEED sdk driver. Do we need them all?
> +
> +/* AST_PECI_TIMING - 0x04 : Timing Negotiation Register */
> +#define PECI_TIMING_MESSAGE_MASK GENMASK(15, 8)
> +#define PECI_TIMING_MESSAGE(x) (((x) << 8) & PECI_TIMING_MESSAGE_MASK)
> +#define PECI_TIMING_MESSAGE_GET(x) (((x) & PECI_TIMING_MESSAGE_MASK) >> 8)
> +#define PECI_TIMING_ADDRESS_MASK GENMASK(7, 0)
> +#define PECI_TIMING_ADDRESS(x) ((x) & PECI_TIMING_ADDRESS_MASK)
> +#define PECI_TIMING_ADDRESS_GET(x) ((x) & PECI_TIMING_ADDRESS_MASK)
> +
> +/* AST_PECI_CMD - 0x08 : Command Register */
> +#define PECI_CMD_PIN_MON BIT(31)
> +#define PECI_CMD_STS_MASK GENMASK(27, 24)
> +#define PECI_CMD_STS_GET(x) (((x) & PECI_CMD_STS_MASK) >> 24)
> +#define PECI_CMD_FIRE BIT(0)
> +
> +/* AST_PECI_LEN - 0x0C : Read/Write Length Register */
> +#define PECI_AW_FCS_EN BIT(31)
> +#define PECI_READ_LEN_MASK GENMASK(23, 16)
> +#define PECI_READ_LEN(x) (((x) << 16) & PECI_READ_LEN_MASK)
> +#define PECI_WRITE_LEN_MASK GENMASK(15, 8)
> +#define PECI_WRITE_LEN(x) (((x) << 8) & PECI_WRITE_LEN_MASK)
> +#define PECI_TAGET_ADDR_MASK GENMASK(7, 0)
> +#define PECI_TAGET_ADDR(x) ((x) & PECI_TAGET_ADDR_MASK)
> +
> +/* AST_PECI_EXP_FCS - 0x10 : Expected FCS Data Register */
> +#define PECI_EXPECT_READ_FCS_MASK GENMASK(23, 16)
> +#define PECI_EXPECT_READ_FCS_GET(x) (((x) & PECI_EXPECT_READ_FCS_MASK) >> 16)
> +#define PECI_EXPECT_AW_FCS_AUTO_MASK GENMASK(15, 8)
> +#define PECI_EXPECT_AW_FCS_AUTO_GET(x) (((x) & PECI_EXPECT_AW_FCS_AUTO_MASK) \
> + >> 8)
> +#define PECI_EXPECT_WRITE_FCS_MASK GENMASK(7, 0)
> +#define PECI_EXPECT_WRITE_FCS_GET(x) ((x) & PECI_EXPECT_WRITE_FCS_MASK)
> +
> +/* AST_PECI_CAP_FCS - 0x14 : Captured FCS Data Register */
> +#define PECI_CAPTURE_READ_FCS_MASK GENMASK(23, 16)
> +#define PECI_CAPTURE_READ_FCS_GET(x) (((x) & PECI_CAPTURE_READ_FCS_MASK) >> 16)
> +#define PECI_CAPTURE_WRITE_FCS_MASK GENMASK(7, 0)
> +#define PECI_CAPTURE_WRITE_FCS_GET(x) ((x) & PECI_CAPTURE_WRITE_FCS_MASK)
> +
> +/* AST_PECI_INT_CTRL/STS - 0x18/0x1c : Interrupt Register */
> +#define PECI_INT_TIMING_RESULT_MASK GENMASK(31, 30)
> +#define PECI_INT_TIMEOUT BIT(4)
> +#define PECI_INT_CONNECT BIT(3)
> +#define PECI_INT_W_FCS_BAD BIT(2)
> +#define PECI_INT_W_FCS_ABORT BIT(1)
> +#define PECI_INT_CMD_DONE BIT(0)
> +
> +struct aspeed_peci {
> + struct peci_adapter adaper;
> + struct device *dev;
> + struct regmap *regmap;
> + int irq;
> + struct completion xfer_complete;
> + u32 status;
> + u32 cmd_timeout_ms;
> +};
> +
> +#define PECI_INT_MASK (PECI_INT_TIMEOUT | PECI_INT_CONNECT | \
> + PECI_INT_W_FCS_BAD | PECI_INT_W_FCS_ABORT | \
> + PECI_INT_CMD_DONE)
> +
> +#define PECI_IDLE_CHECK_TIMEOUT_MS 50
> +#define PECI_IDLE_CHECK_INTERVAL_MS 10
> +
> +#define PECI_RD_SAMPLING_POINT_DEFAULT 8
> +#define PECI_RD_SAMPLING_POINT_MAX 15
> +#define PECI_CLK_DIV_DEFAULT 0
> +#define PECI_CLK_DIV_MAX 7
> +#define PECI_MSG_TIMING_NEGO_DEFAULT 1
> +#define PECI_MSG_TIMING_NEGO_MAX 255
> +#define PECI_ADDR_TIMING_NEGO_DEFAULT 1
> +#define PECI_ADDR_TIMING_NEGO_MAX 255
> +#define PECI_CMD_TIMEOUT_MS_DEFAULT 1000
> +#define PECI_CMD_TIMEOUT_MS_MAX 60000
> +
> +static int aspeed_peci_xfer_native(struct aspeed_peci *priv,
> + struct peci_xfer_msg *msg)
> +{
> + long err, timeout = msecs_to_jiffies(priv->cmd_timeout_ms);
> + u32 peci_head, peci_state, rx_data, cmd_sts;
> + ktime_t start, end;
> + s64 elapsed_ms;
> + int i, rc = 0;
> + uint reg;
> +
> + start = ktime_get();
> +
> + /* Check command sts and bus idle state */
> + while (!regmap_read(priv->regmap, AST_PECI_CMD, &cmd_sts) &&
> + (cmd_sts & (PECI_CMD_STS_MASK | PECI_CMD_PIN_MON))) {
> + end = ktime_get();
> + elapsed_ms = ktime_to_ms(ktime_sub(end, start));
> + if (elapsed_ms >= PECI_IDLE_CHECK_TIMEOUT_MS) {
> + dev_dbg(priv->dev, "Timeout waiting for idle state!\n");
> + return -ETIMEDOUT;
> + }
> +
> + usleep_range(PECI_IDLE_CHECK_INTERVAL_MS * 1000,
> + (PECI_IDLE_CHECK_INTERVAL_MS * 1000) + 1000);
> + };
Could the above use regmap_read_poll_timeout instead?
> +
> + reinit_completion(&priv->xfer_complete);
> +
> + peci_head = PECI_TAGET_ADDR(msg->addr) |
> + PECI_WRITE_LEN(msg->tx_len) |
> + PECI_READ_LEN(msg->rx_len);
> +
> + rc = regmap_write(priv->regmap, AST_PECI_CMD_CTRL, peci_head);
> + if (rc)
> + return rc;
> +
> + for (i = 0; i < msg->tx_len; i += 4) {
> + reg = i < 16 ? AST_PECI_W_DATA0 + i % 16 :
> + AST_PECI_W_DATA4 + i % 16;
> + rc = regmap_write(priv->regmap, reg,
> + (msg->tx_buf[i + 3] << 24) |
> + (msg->tx_buf[i + 2] << 16) |
> + (msg->tx_buf[i + 1] << 8) |
> + msg->tx_buf[i + 0]);
That looks like an endian swap. Can we do something like this?
regmap_write(map, reg, cpu_to_be32p((void *)msg->tx_buff))
> + if (rc)
> + return rc;
> + }
> +
> + dev_dbg(priv->dev, "HEAD : 0x%08x\n", peci_head);
> +#if DUMP_DEBUG
Having #defines is frowned upon. I think print_hex_dump_debug will do
what you want here.
> + print_hex_dump(KERN_DEBUG, "TX : ", DUMP_PREFIX_NONE, 16, 1,
> + msg->tx_buf, msg->tx_len, true);
> +#endif
> +
> + rc = regmap_write(priv->regmap, AST_PECI_CMD, PECI_CMD_FIRE);
> + if (rc)
> + return rc;
> +
> + err = wait_for_completion_interruptible_timeout(&priv->xfer_complete,
> + timeout);
> +
> + dev_dbg(priv->dev, "INT_STS : 0x%08x\n", priv->status);
> + if (!regmap_read(priv->regmap, AST_PECI_CMD, &peci_state))
> + dev_dbg(priv->dev, "PECI_STATE : 0x%lx\n",
> + PECI_CMD_STS_GET(peci_state));
> + else
> + dev_dbg(priv->dev, "PECI_STATE : read error\n");
> +
> + rc = regmap_write(priv->regmap, AST_PECI_CMD, 0);
> + if (rc)
> + return rc;
> +
> + if (err <= 0 || !(priv->status & PECI_INT_CMD_DONE)) {
> + if (err < 0) { /* -ERESTARTSYS */
> + return (int)err;
> + } else if (err == 0) {
> + dev_dbg(priv->dev, "Timeout waiting for a response!\n");
> + return -ETIMEDOUT;
> + }
> +
> + dev_dbg(priv->dev, "No valid response!\n");
> + return -EIO;
> + }
> +
> + for (i = 0; i < msg->rx_len; i++) {
> + u8 byte_offset = i % 4;
> +
> + if (byte_offset == 0) {
> + reg = i < 16 ? AST_PECI_R_DATA0 + i % 16 :
> + AST_PECI_R_DATA4 + i % 16;
I find this hard to read. Use a few more lines to make it clear what
your code is doing.
Actually, the entire for loop is cryptic. I understand what it's doing
now. Can you rework it to make it more readable? You follow a similar
pattern above in the write case.
> + rc = regmap_read(priv->regmap, reg, &rx_data);
> + if (rc)
> + return rc;
> + }
> +
> + msg->rx_buf[i] = (u8)(rx_data >> (byte_offset << 3))
> + }
> +
> +#if DUMP_DEBUG
> + print_hex_dump(KERN_DEBUG, "RX : ", DUMP_PREFIX_NONE, 16, 1,
> + msg->rx_buf, msg->rx_len, true);
> +#endif
> + if (!regmap_read(priv->regmap, AST_PECI_CMD, &peci_state))
> + dev_dbg(priv->dev, "PECI_STATE : 0x%lx\n",
> + PECI_CMD_STS_GET(peci_state));
> + else
> + dev_dbg(priv->dev, "PECI_STATE : read error\n");
Given the regmap_read is always going to be a memory read on the
aspeed, I can't think of a situation where the read will fail.
On that note, is there a reason you are using regmap and not just
accessing the hardware directly? regmap imposes a number of pointer
lookups and tests each time you do a read or write.
> + dev_dbg(priv->dev, "------------------------\n");
> +
> + return rc;
> +}
> +
> +static irqreturn_t aspeed_peci_irq_handler(int irq, void *arg)
> +{
> + struct aspeed_peci *priv = arg;
> + u32 status_ack = 0;
> +
> + if (regmap_read(priv->regmap, AST_PECI_INT_STS, &priv->status))
> + return IRQ_NONE;
Again, a memory mapped read won't fail. How about we check that the
regmap is working once in your _probe() function, and assume it will
continue working from there (or remove the regmap abstraction all
together).
> +
> + /* Be noted that multiple interrupt bits can be set at the same time */
> + if (priv->status & PECI_INT_TIMEOUT) {
> + dev_dbg(priv->dev, "PECI_INT_TIMEOUT\n");
> + status_ack |= PECI_INT_TIMEOUT;
> + }
> +
> + if (priv->status & PECI_INT_CONNECT) {
> + dev_dbg(priv->dev, "PECI_INT_CONNECT\n");
> + status_ack |= PECI_INT_CONNECT;
> + }
> +
> + if (priv->status & PECI_INT_W_FCS_BAD) {
> + dev_dbg(priv->dev, "PECI_INT_W_FCS_BAD\n");
> + status_ack |= PECI_INT_W_FCS_BAD;
> + }
> +
> + if (priv->status & PECI_INT_W_FCS_ABORT) {
> + dev_dbg(priv->dev, "PECI_INT_W_FCS_ABORT\n");
> + status_ack |= PECI_INT_W_FCS_ABORT;
> + }
All of this code is for debugging only. Do you want to put it behind
some kind of conditional?
> +
> + /**
> + * All commands should be ended up with a PECI_INT_CMD_DONE bit set
> + * even in an error case.
> + */
> + if (priv->status & PECI_INT_CMD_DONE) {
> + dev_dbg(priv->dev, "PECI_INT_CMD_DONE\n");
> + status_ack |= PECI_INT_CMD_DONE;
> + complete(&priv->xfer_complete);
> + }
> +
> + if (regmap_write(priv->regmap, AST_PECI_INT_STS, status_ack))
> + return IRQ_NONE;
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int aspeed_peci_init_ctrl(struct aspeed_peci *priv)
> +{
> + u32 msg_timing_nego, addr_timing_nego, rd_sampling_point;
> + u32 clk_freq, clk_divisor, clk_div_val = 0;
> + struct clk *clkin;
> + int ret;
> +
> + clkin = devm_clk_get(priv->dev, NULL);
> + if (IS_ERR(clkin)) {
> + dev_err(priv->dev, "Failed to get clk source.\n");
> + return PTR_ERR(clkin);
> + }
> +
> + ret = of_property_read_u32(priv->dev->of_node, "clock-frequency",
> + &clk_freq);
> + if (ret < 0) {
> + dev_err(priv->dev,
> + "Could not read clock-frequency property.\n");
> + return ret;
> + }
> +
> + clk_divisor = clk_get_rate(clkin) / clk_freq;
> + devm_clk_put(priv->dev, clkin);
> +
> + while ((clk_divisor >> 1) && (clk_div_val < PECI_CLK_DIV_MAX))
> + clk_div_val++;
We have a framework for doing clocks in the kernel. Would it make
sense to write a driver for this clock and add it to
drivers/clk/clk-aspeed.c?
> +
> + ret = of_property_read_u32(priv->dev->of_node, "msg-timing-nego",
> + &msg_timing_nego);
> + if (ret || msg_timing_nego > PECI_MSG_TIMING_NEGO_MAX) {
> + dev_warn(priv->dev,
> + "Invalid msg-timing-nego : %u, Use default : %u\n",
> + msg_timing_nego, PECI_MSG_TIMING_NEGO_DEFAULT);
The property is optional so I suggest we don't print a message if it's
not present. We certainly don't want to print a message saying
"invalid".
The same comment applies to the other optional properties below.
> + msg_timing_nego = PECI_MSG_TIMING_NEGO_DEFAULT;
> + }
> +
> + ret = of_property_read_u32(priv->dev->of_node, "addr-timing-nego",
> + &addr_timing_nego);
> + if (ret || addr_timing_nego > PECI_ADDR_TIMING_NEGO_MAX) {
> + dev_warn(priv->dev,
> + "Invalid addr-timing-nego : %u, Use default : %u\n",
> + addr_timing_nego, PECI_ADDR_TIMING_NEGO_DEFAULT);
> + addr_timing_nego = PECI_ADDR_TIMING_NEGO_DEFAULT;
> + }
> +
> + ret = of_property_read_u32(priv->dev->of_node, "rd-sampling-point",
> + &rd_sampling_point);
> + if (ret || rd_sampling_point > PECI_RD_SAMPLING_POINT_MAX) {
> + dev_warn(priv->dev,
> + "Invalid rd-sampling-point : %u. Use default : %u\n",
> + rd_sampling_point,
> + PECI_RD_SAMPLING_POINT_DEFAULT);
> + rd_sampling_point = PECI_RD_SAMPLING_POINT_DEFAULT;
> + }
> +
> + ret = of_property_read_u32(priv->dev->of_node, "cmd-timeout-ms",
> + &priv->cmd_timeout_ms);
> + if (ret || priv->cmd_timeout_ms > PECI_CMD_TIMEOUT_MS_MAX ||
> + priv->cmd_timeout_ms == 0) {
> + dev_warn(priv->dev,
> + "Invalid cmd-timeout-ms : %u. Use default : %u\n",
> + priv->cmd_timeout_ms,
> + PECI_CMD_TIMEOUT_MS_DEFAULT);
> + priv->cmd_timeout_ms = PECI_CMD_TIMEOUT_MS_DEFAULT;
> + }
> +
> + ret = regmap_write(priv->regmap, AST_PECI_CTRL,
> + PECI_CTRL_CLK_DIV(PECI_CLK_DIV_DEFAULT) |
> + PECI_CTRL_PECI_CLK_EN);
> + if (ret)
> + return ret;
> +
> + usleep_range(1000, 5000);
Can we probe in parallel? If not, putting a sleep in the _probe will
hold up the rest of drivers from being able to do anything, and hold
up boot.
If you decide that you do need to probe here, please add a comment.
(This is the wait for the clock to be stable?)
> +
> + /**
> + * Timing negotiation period setting.
> + * The unit of the programmed value is 4 times of PECI clock period.
> + */
> + ret = regmap_write(priv->regmap, AST_PECI_TIMING,
> + PECI_TIMING_MESSAGE(msg_timing_nego) |
> + PECI_TIMING_ADDRESS(addr_timing_nego));
> + if (ret)
> + return ret;
> +
> + /* Clear interrupts */
> + ret = regmap_write(priv->regmap, AST_PECI_INT_STS, PECI_INT_MASK);
> + if (ret)
> + return ret;
> +
> + /* Enable interrupts */
> + ret = regmap_write(priv->regmap, AST_PECI_INT_CTRL, PECI_INT_MASK);
> + if (ret)
> + return ret;
> +
> + /* Read sampling point and clock speed setting */
> + ret = regmap_write(priv->regmap, AST_PECI_CTRL,
> + PECI_CTRL_SAMPLING(rd_sampling_point) |
> + PECI_CTRL_CLK_DIV(clk_div_val) |
> + PECI_CTRL_PECI_EN | PECI_CTRL_PECI_CLK_EN);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static const struct regmap_config aspeed_peci_regmap_config = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = 4,
> + .max_register = AST_PECI_R_DATA7,
> + .val_format_endian = REGMAP_ENDIAN_LITTLE,
> + .fast_io = true,
> +};
> +
> +static int aspeed_peci_xfer(struct peci_adapter *adaper,
> + struct peci_xfer_msg *msg)
> +{
> + struct aspeed_peci *priv = peci_get_adapdata(adaper);
> +
> + return aspeed_peci_xfer_native(priv, msg);
> +}
> +
> +static int aspeed_peci_probe(struct platform_device *pdev)
> +{
> + struct aspeed_peci *priv;
> + struct resource *res;
> + void __iomem *base;
> + int ret = 0;
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + dev_set_drvdata(&pdev->dev, priv);
> + priv->dev = &pdev->dev;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
> + &aspeed_peci_regmap_config);
> + if (IS_ERR(priv->regmap))
> + return PTR_ERR(priv->regmap);
> +
> + priv->irq = platform_get_irq(pdev, 0);
> + if (!priv->irq)
> + return -ENODEV;
> +
> + ret = devm_request_irq(&pdev->dev, priv->irq, aspeed_peci_irq_handler,
> + IRQF_SHARED,
This interrupt is only for the peci device. Why is it marked as shared?
> + "peci-aspeed-irq",
> + priv);
> + if (ret < 0)
> + return ret;
> +
> + init_completion(&priv->xfer_complete);
> +
> + priv->adaper.dev.parent = priv->dev;
> + priv->adaper.dev.of_node = of_node_get(dev_of_node(priv->dev));
> + strlcpy(priv->adaper.name, pdev->name, sizeof(priv->adaper.name));
> + priv->adaper.xfer = aspeed_peci_xfer;
> + peci_set_adapdata(&priv->adaper, priv);
> +
> + ret = aspeed_peci_init_ctrl(priv);
> + if (ret < 0)
> + return ret;
> +
> + ret = peci_add_adapter(&priv->adaper);
> + if (ret < 0)
> + return ret;
> +
> + dev_info(&pdev->dev, "peci bus %d registered, irq %d\n",
> + priv->adaper.nr, priv->irq);
> +
> + return 0;
> +}
> +
> +static int aspeed_peci_remove(struct platform_device *pdev)
> +{
> + struct aspeed_peci *priv = dev_get_drvdata(&pdev->dev);
> +
> + peci_del_adapter(&priv->adaper);
> + of_node_put(priv->adaper.dev.of_node);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id aspeed_peci_of_table[] = {
> + { .compatible = "aspeed,ast2400-peci", },
> + { .compatible = "aspeed,ast2500-peci", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, aspeed_peci_of_table);
> +
> +static struct platform_driver aspeed_peci_driver = {
> + .probe = aspeed_peci_probe,
> + .remove = aspeed_peci_remove,
> + .driver = {
> + .name = "peci-aspeed",
> + .of_match_table = of_match_ptr(aspeed_peci_of_table),
> + },
> +};
> +module_platform_driver(aspeed_peci_driver);
> +
> +MODULE_AUTHOR("Ryan Chen <ryan_chen at aspeedtech.com>");
> +MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo at linux.intel.com>");
> +MODULE_DESCRIPTION("Aspeed PECI driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.16.2
>
More information about the openbmc
mailing list