[PATCH v3 linux dev-4.13] ARM: dts: aspeed: Add Portwell Neptune machine

[Andrew Jeffery]

On Tue, 27 Mar 2018, at 09:41, Amithash Prasad wrote:
> Initial introduction of Portwell Neptune family equipped with
> Aspeed 2500 BMC SoC. Neptune is a x86 server development kit with a
> ASPEED ast2500 BMC manufactured by Portwell. Specifically, This
> adds the neptune platform device tree file including the flash
> layout used by the neptune machines.
> 
> Signed-off-by: Amithash Prasad <amithash at fb.com>

Acked-by: Andrew Jeffery <andrew at aj.id.au>

> ---
>  .../devicetree/bindings/vendor-prefixes.txt        |   1 +
>  arch/arm/boot/dts/Makefile                         |   3 +-
>  arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts  | 159 +++++++++++++++++++++
>  3 files changed, 162 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
> 
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/
> Documentation/devicetree/bindings/vendor-prefixes.txt
> index daf465be..ad3406d 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -255,6 +255,7 @@ pine64	Pine64
>  pixcir  PIXCIR MICROELECTRONICS Co., Ltd
>  plathome	Plat'Home Co., Ltd.
>  plda	PLDA
> +portwell	Portwell Inc.
>  poslab	Poslab Technology Co., Ltd.
>  powervr	PowerVR (deprecated, use img)
>  pulsedlight	PulsedLight, Inc
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 5cfee25..4746060 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1061,7 +1061,8 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
>  	aspeed-bmc-opp-romulus.dtb \
>  	aspeed-bmc-opp-witherspoon.dtb \
>  	aspeed-bmc-opp-zaius.dtb \
> -	aspeed-bmc-quanta-q71l.dtb
> +	aspeed-bmc-quanta-q71l.dtb \
> +	aspeed-bmc-portwell-neptune.dtb
>  endif
>  
>  dtstree		:= $(srctree)/$(src)
> diff --git a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts b/arch/
> arm/boot/dts/aspeed-bmc-portwell-neptune.dts
> new file mode 100644
> index 0000000..43ed139
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
> @@ -0,0 +1,159 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2017 Facebook Inc.
> +/dts-v1/;
> +
> +#include "aspeed-g5.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +
> +/ {
> +	model = "Portwell Neptune BMC";
> +	compatible = "portwell,neptune-bmc", "aspeed,ast2500";
> +	aliases {
> +		serial0 = &uart1;
> +		serial4 = &uart5;
> +	};
> +	chosen {
> +		stdout-path = &uart5;
> +		bootargs = "console=ttyS4,115200 earlyprintk";
> +	};
> +
> +	memory {
> +		reg = <0x80000000 0x20000000>;
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		postcode0 {
> +			label="BMC_UP";
> +			gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
> +			default-state = "on";
> +		};
> +		postcode1 {
> +			label="BMC_HB";
> +			gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +		postcode2 {
> +			label="FAULT";
> +			gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
> +		};
> +		// postcode3-7 are GPIOH3-H7
> +	};
> +};
> +
> +&fmc {
> +	status = "okay";
> +	flash at 0 {
> +		status = "okay";
> +		m25p,fast-read;
> +#include "openbmc-flash-layout.dtsi"
> +	};
> +};
> +
> +&spi1 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_spi1_default>;
> +	flash at 0 {
> +		status = "okay";
> +		m25p,fast-read;
> +		label = "pnor";
> +	};
> +};
> +
> +&uart1 {
> +	// Host Console
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_txd1_default
> +		     &pinctrl_rxd1_default>;
> +};
> +
> +&uart5 {
> +	// BMC Console
> +	status = "okay";
> +};
> +
> +&mac0 {
> +	status = "okay";
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_rmii1_default
> +		     &pinctrl_mdio1_default>;
> +};
> +
> +&mac1 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_rmii2_default>;
> +	use-ncsi;
> +};
> +
> +&i2c1 {
> +	status = "okay";
> +	// To PCIe slot SMBUS
> +};
> +
> +&i2c2 {
> +	status = "okay";
> +	// To LAN I210
> +};
> +
> +&i2c3 {
> +	status = "okay";
> +	// SMBus to COMe AB
> +};
> +
> +&i2c4 {
> +	status = "okay";
> +	// I2C to COMe AB
> +};
> +
> +&i2c5 {
> +	status = "okay";
> +// 	USB Debug card
> +	pca9555 at 27 {
> +		compatible = "nxp,pca9555";
> +		reg = <0x27>;
> +	};
> +};
> +
> +&i2c6 {
> +	status = "okay";
> +	tpm at 20 {
> +		compatible = "infineon,slb9645tt";
> +		reg = <0x20>;
> +	};
> +	tmp421 at 4e {
> +		compatible = "ti,tmp421";
> +		reg = <0x4e>;
> +	};
> +	tmp421 at 4f {
> +		compatible = "ti,tmp421";
> +		reg = <0x4f>;
> +	};
> +};
> +
> +&i2c8 {
> +	status = "okay";
> +	eeprom at 51 {
> +		compatible = "atmel,24c128";
> +		reg = <0x51>;
> +		pagesize = <32>;
> +	};
> +};
> +
> +&pwm_tacho {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
> +	fan at 0 {
> +		reg = <0x00>;
> +		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
> +	};
> +
> +	fan at 1 {
> +		reg = <0x00>;
> +		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
> +	};
> +};
> -- 
> 2.9.5
> 


-- 
  Andrew Jeffery
  andrew at aj.id.au