Porting OpenBMC to Raspberry PI 3.

[Javier Romero]

Chris,

Thank you for your answer. I'll start working on those points you've
suggested.

Regards,




*Javier Romero*

*E-mail: xavinux at gmail.com <xavinux at gmail.com>*

*Skype: xavinux*


2017-09-22 13:33 GMT-03:00 Chris Austen <austenc at us.ibm.com>:

>
> Chris Austen
>
> "openbmc" <openbmc-bounces+austenc=us.ibm.com at lists.ozlabs.org> wrote on
> 09/22/2017 10:49:54 AM:
>
> > From: Javier Romero <xavinux at gmail.com>
> > To: openbmc at lists.ozlabs.org
> > Date: 09/22/2017 10:50 AM
> > Subject: Porting OpenBMC to Raspberry PI 3.
> > Sent by: "openbmc" <openbmc-bounces+austenc=us.ibm.com at lists.ozlabs.org>
> >
> > Hello,
>
> > Have a Raspberry PI 3 and seems that could be useful to port OpenBMC
> > to this device.
>
> > Suggestions on how to start working with this will be welcome.
>
>
> before anything, make sure you have successfully created a build
> https://github.com/openbmc/openbmc#setting-up-your-openbmc-project
> Target Palmetto
>
> Then build the simulator https://github.com/openbmc/
> openbmc#setting-up-your-openbmc-project
>
> Then run the simulator https://github.com/openbmc/openbmc#setting-up-your-
> openbmc-project
>
>
> Once that is done Target a Romulus for build/simulation.  You will notice
> Palmetto is built from ast-2400 and Romulus is ast-2500
> You should notice some layers change between the two.  That gives you a
> base framework.  Next, and this is where no one has done work on the team...
>
> I would try to build an online example of using yocto for raspberry
> images.  Get that to work.  This step has nothing to do with OpenBMC.  It
> has to do about learning how to build a working raspberrypi image.
>
> Once you have done that, the next and most difficult thing... merging the
> two.  document everything in a blog post (maybe your userid in github) and
> that will let people see what you are doing and find helpful hints.
>
>
>
> > Best Regards,
> >
> >
> >
>
> > Javier Romero
> > E-mail: xavinux at gmail.com
> > Skype: xavinux
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20170922/ce5c0c66/attachment.html>