[PATCH v2 1/3] arm: npcm: add basic support for Nuvoton BMCs
Brendan Higgins
brendanhiggins at google.com
Wed Sep 6 10:42:46 AEST 2017
With the exception of one comment, which I have responded to
below, I have addressed your comments in my new version of
this patch: https://patchwork.kernel.org/patch/9914153/
On Mon, Sep 4, 2017 at 7:47 PM, Florian Fainelli <f.fainelli at gmail.com> wrote:
...
>> +
>> +ENTRY(v7_invalidate_l1_npcmX50)
>> + mov r0, #0
>> + mcr p15, 0, r0, c7, c5, 0 /* invalidate I cache */
>> + mcr p15, 2, r0, c0, c0, 0
>> + mrc p15, 1, r0, c0, c0, 0
>> +
>> + ldr r1, =0x7fff
>> + and r2, r1, r0, lsr #13
>> +
>> + ldr r1, =0x3ff
>> +
>> + and r3, r1, r0, lsr #3 /* NumWays - 1 */
>> + add r2, r2, #1 /* NumSets */
>> +
>> + and r0, r0, #0x7
>> + add r0, r0, #4 /* SetShift */
>> +
>> + clz r1, r3 /* WayShift */
>> + add r4, r3, #1 /* NumWays */
>> +1: sub r2, r2, #1 /* NumSets-- */
>> + mov r3, r4 /* Temp = NumWays */
>> +2: subs r3, r3, #1 /* Temp-- */
>> + mov r5, r3, lsl r1
>> + mov r6, r2, lsl r0
>> + /* Reg = (Temp << WayShift) | (NumSets << SetShift) */
>> + orr r5, r5, r6
>> + mcr p15, 0, r5, c7, c6, 2
>> + bgt 2b
>> + cmp r2, #0
>> + bgt 1b
>> + dsb
>> + isb
>> + mov pc, lr
>> +ENDPROC(v7_invalidate_l1_npcmX50)
>
> This looks a lot, if not nearly the same thing as v7_invalidate_l1 which
> is already called by secondary_startup, can you see if you can re-use it
> directly?
>
>> +
>> +/*
>> + * MSM specific entry point for secondary CPUs. This provides
>> + * a "holding pen" into which all secondary cores are held until we're
>> + * ready for them to initialise.
>> + */
>
> Assuming this was copied from a Qualcomm MSM routine, you may want to
> fix the comment, typo on "initialis.
>
>> +ENTRY(npcm7xx_secondary_startup)
>> + msr CPSR_c, #(SVC_MODE)
>
> Is there a BootROM or something that would not make the secondary cores
> start in supervisor mode?
Unfortunately, yes; however, I was able to cut all of the other code out of
npcm7xx_secondary_startup, so now it just puts the core in SVC mode and
relies on secondary_startup to do all of the L1 cache invalidation.
>
>> +
>> + bl v7_invalidate_l1_npcmX50
>> + /* disable vector table remapping */
>> + mrc p15, 0,r0, c1, c0, 0
>> + and r0, #0xffffdfff
>> + mcr p15, 0,r0, c1, c0, 0
>> +
>> +#ifdef CONFIG_CACHE_L2X0
>> + /* Enable L1 & L2 prefetch + Zero line */
>> + mrc p15, 0, r0, c1, c0, 1
>> + orr r0, r0, #(7 << 1)
>> + mcr p15, 0, r0, c1, c0, 1
>> +#endif /* CONFIG_CACHE_L2X0 */
>> +
>> + mrc p15, 0, r0, c0, c0, 5
>> + and r0, r0, #15
>> + adr r4, 1f
>> + ldmia r4, {r5, r6}
>> + sub r4, r4, r5
>> + add r6, r6, r4
>> + str r3,[r2]
>> +
>> +pen: ldr r7, [r6]
>> + cmp r7, r0
>> + bne pen
>> +
...
More information about the openbmc
mailing list