[PATCH linux dev-4.10] aspeed: firestone: Set SIO to bypass UART in hostboot

[Andrew Jeffery]

On Wed, 2017-10-11 at 15:41 +0800, Lei YU wrote:
> OpenBMC fails to boot host on Firestone.
> The cause is that Firestone's hostboot hangs after disables
> SUART/VUART.
> 
> The workaround is to make hostboot run into default SUART init
> without disabling VUART, by setting 0x170 SIO register to 0.
> 
> With this workaround, Firestone boots OK.
> 
> Signed-off-by: Lei YU <mine260309 at gmail.com>

Applied to dev-4.10.

We really should start to think again about how best to do this from userspace.

Andrew

> ---
>  arch/arm/mach-aspeed/aspeed.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm/mach-aspeed/aspeed.c b/arch/arm/mach-aspeed/aspeed.c
> index a9e91d9..c84c871 100644
> --- a/arch/arm/mach-aspeed/aspeed.c
> +++ b/arch/arm/mach-aspeed/aspeed.c
> @@ -104,6 +104,10 @@ static void __init do_firestone_setup(void)
>  
>  	/* Override serial destination to use the dedicated serial port */
>  	writel(0x00004000, AST_IO(AST_BASE_LPC | 0x174));
> +
> +	/* Workaround to make hostboot run into default SUART init */
> +	/* Otherwise it fails to boot */
> +	writel(0x00000000, AST_IO(AST_BASE_LPC | 0x170));
>  }
>  
>  static void __init do_garrison_setup(void)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: This is a digitally signed message part
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20171013/b0e15bef/attachment.sig>