[PATCH linux dev-4.10 v3] ARM: aspeed: Add Mellanox MSN machine (device tree)
Mykola Kostenok
c_mykolak at mellanox.com
Mon May 29 23:54:31 AEST 2017
Initial introduction of Mellanox switches of MSNXXXX family equipped
with Aspeed 2520 BMC SoC. This adds msn platform device tree file.
Signed-off-by: Mykola Kostenok <c_mykolak at mellanox.com>
---
v1->v2
Fixed issues pointed out by Joel:
- Make commit title shorter.
- Replace flash layout from separate dtsi to dts.
- Change compatible = "mellanox,msnxxxx-bmc" to "mellanox,msn-bmc".
- Remove no-hw-checksum from dts.
- Add comments.
- Remove WD2 disable from aspeed.c
- Add wdt2 to dts.
v2->v3
Fixed issues pointed out by Joel:
- Split v2 patch into three separate.
- Remove unnesesary include in dts.
- Replace flash layout to separate dsti.
- Remove spi2 as it was disabled.
- Add uart1 pinctrl.
---
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/boot/dts/Makefile | 1 +
.../dts/aspeed-bmc-mellanox-msn-flash-layout.dtsi | 32 ++++
arch/arm/boot/dts/aspeed-bmc-mellanox-msn.dts | 192 +++++++++++++++++++++
4 files changed, 226 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-mellanox-msn-flash-layout.dtsi
create mode 100644 arch/arm/boot/dts/aspeed-bmc-mellanox-msn.dts
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 16d3b5e7f5d1..84601d869a1b 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -172,6 +172,7 @@ meas Measurement Specialties
mediatek MediaTek Inc.
melexis Melexis N.V.
melfas MELFAS Inc.
+mellanox Mellanox Technologies
memsic MEMSIC Inc.
merrii Merrii Technology Co., Ltd.
micrel Micrel Inc.
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 30fe65627f30..3dba6c633686 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -990,6 +990,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += aspeed-bmc-opp-palmetto.dtb \
aspeed-bmc-opp-witherspoon.dtb \
aspeed-bmc-opp-zaius.dtb \
aspeed-bmc-opp-lanyang.dtb \
+ aspeed-bmc-mellanox-msn.dtb \
aspeed-ast2500-evb.dtb
endif
diff --git a/arch/arm/boot/dts/aspeed-bmc-mellanox-msn-flash-layout.dtsi b/arch/arm/boot/dts/aspeed-bmc-mellanox-msn-flash-layout.dtsi
new file mode 100644
index 000000000000..cf8ee54f13c2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-mellanox-msn-flash-layout.dtsi
@@ -0,0 +1,32 @@
+/* This file is the label for the bmc primary flash and its partitions */
+ label = "bmc";
+ #address-cells = < 1 >;
+ #size-cells = < 1 >;
+ u-boot {
+ reg = < 0 0x60000 >;
+ label = "u-boot";
+ };
+ u-boot-env {
+ reg = < 0x60000 0x10000>;
+ label = "u-boot-env";
+ };
+ kernel {
+ reg = < 0x70000 0x280000 >;
+ label = "kernel";
+ };
+ dtb {
+ reg = < 0x2f0000 0x10000 >;
+ label = "dtb";
+ };
+ initramfs {
+ reg = < 0x300000 0x1c0000 >;
+ label = "initramfs";
+ };
+ rofs {
+ reg = < 0x4c0000 0x1740000 >;
+ label = "rofs";
+ };
+ rwfs {
+ reg = < 0x1c00000 0x400000 >;
+ label = "rwfs";
+ };
diff --git a/arch/arm/boot/dts/aspeed-bmc-mellanox-msn.dts b/arch/arm/boot/dts/aspeed-bmc-mellanox-msn.dts
new file mode 100644
index 000000000000..4c69caf08111
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-mellanox-msn.dts
@@ -0,0 +1,192 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include "aspeed-g5.dtsi"
+
+/ {
+ model = "MSN BMC";
+ compatible = "mellanox,msn-bmc", "aspeed,ast2500";
+
+ aliases {
+ serial0 = &uart1;
+ serial4 = &uart5;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200n8 earlyprintk";
+ };
+
+ memory {
+ /* 512MiB SDRAM DDR4 @ 0x8000_0000 */
+ reg = <0x80000000 0x20000000>;
+ };
+
+ ahb {
+ bmc_pnor: fmc at 1e620000 {
+ reg = < 0x1e620000 0xc4
+ 0x20000000 0x02000000 >;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "aspeed,ast2500-fmc";
+ interrupts = <19>;
+ flash at 0 {
+ reg = < 0 >;
+ compatible = "jedec,spi-nor" ;
+#include "aspeed-bmc-mellanox-msn-flash-layout.dtsi"
+ };
+ };
+ };
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default
+ &pinctrl_nrts1_default
+ &pinctrl_ndtr1_default
+ &pinctrl_ndsr1_default
+ &pinctrl_ncts1_default
+ &pinctrl_ndcd1_default
+ &pinctrl_nri1_default>;
+};
+
+&mac0 {
+ status = "okay";
+ use-ncsi;
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+
+ eeprom at 50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+
+ eeprom at 51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ eeprom at 51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ };
+
+ eeprom at 52 {
+ compatible = "atmel,24c32";
+ reg = <0x52>;
+ };
+
+ eeprom at 55 {
+ compatible = "atmel,24c32";
+ reg = <0x55>;
+ };
+
+ i2cswitch at 71 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+
+ carrier_ambient: lm75 at 49 {
+ #thermal-sensor-cells = <0>;
+ compatible = "national,lm75";
+ reg = <0x49>;
+ };
+
+ swbrd_ambient: lm75 at 4a {
+ #thermal-sensor-cells = <0>;
+ compatible = "national,lm75";
+ reg = <0x4a>;
+ };
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+
+ hwmon at 41 {
+ compatible = "ti,ucd9224";
+ reg = <0x41>;
+ };
+
+ hwmon at 27 {
+ compatible = "ti,ucd9224";
+ reg = <0x27>;
+ };
+
+ adc at 6d {
+ compatible = "maxim,max11603";
+ reg = <0x6d>;
+ adc0: iio-device at 0 {
+ #io-channel-cells = <1>;
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>,
+ <&adc0 3>, <&adc0 4>, <&adc0 5>,
+ <&adc0 6>, <&adc0 7>;
+ };
+ };
+};
+
+&i2c11 {
+ status = "okay";
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+};
+
+&wdt2 {
+ status = "okay";
+};
+
--
2.11.0
More information about the openbmc
mailing list