[PATCH linux v5 2/2] drivers: hwmon: Support for ASPEED PWM/Fan tach

Jaghathiswari Rankappagounder Natarajan jaghu at google.com
Thu Mar 30 09:15:03 AEDT 2017


Please provide review comments.

On Fri, Mar 24, 2017 at 11:17 AM, Jaghathiswari Rankappagounder
Natarajan <jaghu at google.com> wrote:
> The ASPEED AST2400/2500 PWM controller supports 8 PWM output ports.
> The ASPEED AST2400/2500 Fan tach controller supports 16 tachometer
> inputs.
> The device driver matches on the device tree node. The configuration
> values
> are read from the device tree and written to the respective registers.
> The driver provides a sysfs entries through which the user can
> configure the duty-cycle value (ranging from 0 to 100 percent) and read
> the
> fan tach rpm value.
>
> Signed-off-by: Jaghathiswari Rankappagounder Natarajan <jaghu at google.com>
> ---
>  v5:
> - Changed the driver to suit the changes in the device tree documentation
>
>  v4:
> - Modified this driver to suit the representation in the devicetree
>
>  v3:
> - Only sent out device tree documentation; did not send this driver
>
>  v2:
> - Used BIT()
> - Used regmap
> - Avoided division when raw data is 0
> - Removed empty lines between declaration
> - Removed macros; Used two attribute groups and used is_visible callback
> - Returned error when properties are undefined
> - Removed .owner field
> - Used PTR_ERR_OR_ZERO
> - Removed explicit of_node_put for child nodes
>
>  Documentation/hwmon/aspeed-pwm-tacho |  22 +
>  drivers/hwmon/Kconfig                |  13 +-
>  drivers/hwmon/Makefile               |   1 +
>  drivers/hwmon/aspeed-pwm-tacho.c     | 854 +++++++++++++++++++++++++++++++++++
>  4 files changed, 888 insertions(+), 2 deletions(-)
>  create mode 100644 Documentation/hwmon/aspeed-pwm-tacho
>  create mode 100644 drivers/hwmon/aspeed-pwm-tacho.c
>
> diff --git a/Documentation/hwmon/aspeed-pwm-tacho b/Documentation/hwmon/aspeed-pwm-tacho
> new file mode 100644
> index 000000000000..0e9ec6d5f900
> --- /dev/null
> +++ b/Documentation/hwmon/aspeed-pwm-tacho
> @@ -0,0 +1,22 @@
> +Kernel driver aspeed-pwm-tacho
> +==============================
> +
> +Supported chips:
> +       ASPEED AST2400/2500
> +
> +Authors:
> +       <jaghu at google.com>
> +
> +Description:
> +------------
> +This driver implements support for ASPEED AST2400/2500 PWM and Fan Tacho
> +controller. The PWM controller supports upto 8 PWM outputs. The Fan tacho
> +controller supports upto 16 tachometer inputs.
> +
> +The driver provides the following sensor accesses in sysfs:
> +
> +fanX_input     ro      provide current fan rotation value in RPM as reported
> +                       by the fan to the device.
> +
> +pwmX           rw      get or set PWM fan control value. This is an integer
> +                       value between 0(off) and 255(full speed).
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 45cef3d2c75c..487110f21827 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -341,6 +341,15 @@ config SENSORS_ASB100
>           This driver can also be built as a module.  If so, the module
>           will be called asb100.
>
> +config SENSORS_ASPEED
> +       tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver"
> +       help
> +         This driver provides support for ASPEED AST2400/AST2500 PWM
> +         and Fan Tacho controllers.
> +
> +         This driver can also be built as a module. If so, the module
> +         will be called aspeed_pwm_tacho.
> +
>  config SENSORS_ATXP1
>         tristate "Attansic ATXP1 VID controller"
>         depends on I2C
> @@ -952,7 +961,7 @@ config SENSORS_LM70
>         help
>           If you say yes here you get support for the National Semiconductor
>           LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera-
> -         ture sensor chips.
> +         true sensor chips.
>
>           This driver can also be built as a module.  If so, the module
>           will be called lm70.
> @@ -1506,7 +1515,7 @@ config SENSORS_ADS7871
>
>  config SENSORS_AMC6821
>         tristate "Texas Instruments AMC6821"
> -       depends on I2C
> +       depends on I2C
>         help
>           If you say yes here you get support for the Texas Instruments
>           AMC6821 hardware monitoring chips.
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index aecf4ba17460..83025cc9bb45 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -46,6 +46,7 @@ obj-$(CONFIG_SENSORS_ADT7475) += adt7475.o
>  obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o
>  obj-$(CONFIG_SENSORS_ARM_SCPI) += scpi-hwmon.o
>  obj-$(CONFIG_SENSORS_ASC7621)  += asc7621.o
> +obj-$(CONFIG_SENSORS_ASPEED)   += aspeed-pwm-tacho.o
>  obj-$(CONFIG_SENSORS_ATXP1)    += atxp1.o
>  obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
>  obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o
> diff --git a/drivers/hwmon/aspeed-pwm-tacho.c b/drivers/hwmon/aspeed-pwm-tacho.c
> new file mode 100644
> index 000000000000..28888cc34555
> --- /dev/null
> +++ b/drivers/hwmon/aspeed-pwm-tacho.c
> @@ -0,0 +1,854 @@
> +/*
> + * Copyright (c) 2016 Google, Inc
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 or later as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/delay.h>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/sysfs.h>
> +#include <linux/regmap.h>
> +
> +/* ASPEED PWM & FAN Tach Register Definition */
> +#define ASPEED_PTCR_CTRL               0x00
> +#define ASPEED_PTCR_CLK_CTRL           0x04
> +#define ASPEED_PTCR_DUTY0_CTRL         0x08
> +#define ASPEED_PTCR_DUTY1_CTRL         0x0c
> +#define ASPEED_PTCR_TYPEM_CTRL         0x10
> +#define ASPEED_PTCR_TYPEM_CTRL1                0x14
> +#define ASPEED_PTCR_TYPEN_CTRL         0x18
> +#define ASPEED_PTCR_TYPEN_CTRL1                0x1c
> +#define ASPEED_PTCR_TACH_SOURCE                0x20
> +#define ASPEED_PTCR_TRIGGER            0x28
> +#define ASPEED_PTCR_RESULT             0x2c
> +#define ASPEED_PTCR_INTR_CTRL          0x30
> +#define ASPEED_PTCR_INTR_STS           0x34
> +#define ASPEED_PTCR_TYPEM_LIMIT                0x38
> +#define ASPEED_PTCR_TYPEN_LIMIT                0x3C
> +#define ASPEED_PTCR_CTRL_EXT           0x40
> +#define ASPEED_PTCR_CLK_CTRL_EXT       0x44
> +#define ASPEED_PTCR_DUTY2_CTRL         0x48
> +#define ASPEED_PTCR_DUTY3_CTRL         0x4c
> +#define ASPEED_PTCR_TYPEO_CTRL         0x50
> +#define ASPEED_PTCR_TYPEO_CTRL1                0x54
> +#define ASPEED_PTCR_TACH_SOURCE_EXT    0x60
> +#define ASPEED_PTCR_TYPEO_LIMIT                0x78
> +
> +/* ASPEED_PTCR_CTRL : 0x00 - General Control Register */
> +#define ASPEED_PTCR_CTRL_SET_PWMD_TYPE_PART1   15
> +#define ASPEED_PTCR_CTRL_SET_PWMD_TYPE_PART2   6
> +#define ASPEED_PTCR_CTRL_SET_PWMD_TYPE_MASK    (BIT(7) | BIT(15))
> +
> +#define ASPEED_PTCR_CTRL_SET_PWMC_TYPE_PART1   14
> +#define ASPEED_PTCR_CTRL_SET_PWMC_TYPE_PART2   5
> +#define ASPEED_PTCR_CTRL_SET_PWMC_TYPE_MASK    (BIT(6) | BIT(14))
> +
> +#define ASPEED_PTCR_CTRL_SET_PWMB_TYPE_PART1   13
> +#define ASPEED_PTCR_CTRL_SET_PWMB_TYPE_PART2   4
> +#define ASPEED_PTCR_CTRL_SET_PWMB_TYPE_MASK    (BIT(5) | BIT(13))
> +
> +#define ASPEED_PTCR_CTRL_SET_PWMA_TYPE_PART1   12
> +#define ASPEED_PTCR_CTRL_SET_PWMA_TYPE_PART2   3
> +#define ASPEED_PTCR_CTRL_SET_PWMA_TYPE_MASK    (BIT(4) | BIT(12))
> +
> +#define        ASPEED_PTCR_CTRL_FAN_NUM_EN(x)  BIT(16 + (x))
> +
> +#define        ASPEED_PTCR_CTRL_PWMD_EN        BIT(11)
> +#define        ASPEED_PTCR_CTRL_PWMC_EN        BIT(10)
> +#define        ASPEED_PTCR_CTRL_PWMB_EN        BIT(9)
> +#define        ASPEED_PTCR_CTRL_PWMA_EN        BIT(8)
> +
> +#define        ASPEED_PTCR_CTRL_CLK_SRC        BIT(1)
> +#define        ASPEED_PTCR_CTRL_CLK_EN         BIT(0)
> +
> +/* ASPEED_PTCR_CLK_CTRL : 0x04 - Clock Control Register */
> +/* TYPE N */
> +#define ASPEED_PTCR_CLK_CTRL_TYPEN_MASK                GENMASK(31, 16)
> +#define ASPEED_PTCR_CLK_CTRL_TYPEN_UNIT                24
> +#define ASPEED_PTCR_CLK_CTRL_TYPEN_H           20
> +#define ASPEED_PTCR_CLK_CTRL_TYPEN_L           16
> +/* TYPE M */
> +#define ASPEED_PTCR_CLK_CTRL_TYPEM_MASK         GENMASK(15, 0)
> +#define ASPEED_PTCR_CLK_CTRL_TYPEM_UNIT                8
> +#define ASPEED_PTCR_CLK_CTRL_TYPEM_H           4
> +#define ASPEED_PTCR_CLK_CTRL_TYPEM_L           0
> +
> +/*
> + * ASPEED_PTCR_DUTY_CTRL/1/2/3 : 0x08/0x0C/0x48/0x4C - PWM-FAN duty control
> + * 0/1/2/3 register
> + */
> +#define DUTY_CTRL_PWM2_FALL_POINT      24
> +#define DUTY_CTRL_PWM2_RISE_POINT      16
> +#define DUTY_CTRL_PWM2_RISE_FALL_MASK  GENMASK(31, 16)
> +#define DUTY_CTRL_PWM1_FALL_POINT      8
> +#define DUTY_CTRL_PWM1_RISE_POINT      0
> +#define DUTY_CTRL_PWM1_RISE_FALL_MASK   GENMASK(15, 0)
> +
> +/* ASPEED_PTCR_TYPEM_CTRL : 0x10/0x18/0x50 - Type M/N/O Ctrl 0 Register */
> +#define TYPE_CTRL_FAN_MASK             (GENMASK(5, 1) | GENMASK(31, 16))
> +#define TYPE_CTRL_FAN1_MASK            GENMASK(31, 0)
> +#define TYPE_CTRL_FAN_PERIOD           16
> +#define TYPE_CTRL_FAN_MODE             4
> +#define TYPE_CTRL_FAN_DIVISION         1
> +#define TYPE_CTRL_FAN_TYPE_EN          1
> +
> +/* ASPEED_PTCR_TACH_SOURCE : 0x20/0x60 - Tach Source Register */
> +/* bit [0,1] at 0x20, bit [2] at 0x60 */
> +#define TACH_PWM_SOURCE_BIT01(x)       ((x) * 2)
> +#define TACH_PWM_SOURCE_BIT2(x)                ((x) * 2)
> +#define TACH_PWM_SOURCE_MASK_BIT01(x)  (0x3 << ((x) * 2))
> +#define TACH_PWM_SOURCE_MASK_BIT2(x)   BIT((x) * 2)
> +
> +/* ASPEED_PTCR_RESULT : 0x2c - Result Register */
> +#define RESULT_STATUS_MASK             BIT(31)
> +#define RESULT_VALUE_MASK              0xfffff
> +
> +/* ASPEED_PTCR_CTRL_EXT : 0x40 - General Control Extension #1 Register */
> +#define ASPEED_PTCR_CTRL_SET_PWMH_TYPE_PART1   15
> +#define ASPEED_PTCR_CTRL_SET_PWMH_TYPE_PART2   6
> +#define ASPEED_PTCR_CTRL_SET_PWMH_TYPE_MASK    (BIT(7) | BIT(15))
> +
> +#define ASPEED_PTCR_CTRL_SET_PWMG_TYPE_PART1   14
> +#define ASPEED_PTCR_CTRL_SET_PWMG_TYPE_PART2   5
> +#define ASPEED_PTCR_CTRL_SET_PWMG_TYPE_MASK    (BIT(6) | BIT(14))
> +
> +#define ASPEED_PTCR_CTRL_SET_PWMF_TYPE_PART1   13
> +#define ASPEED_PTCR_CTRL_SET_PWMF_TYPE_PART2   4
> +#define ASPEED_PTCR_CTRL_SET_PWMF_TYPE_MASK    (BIT(5) | BIT(13))
> +
> +#define ASPEED_PTCR_CTRL_SET_PWME_TYPE_PART1   12
> +#define ASPEED_PTCR_CTRL_SET_PWME_TYPE_PART2   3
> +#define ASPEED_PTCR_CTRL_SET_PWME_TYPE_MASK    (BIT(4) | BIT(12))
> +
> +#define        ASPEED_PTCR_CTRL_PWMH_EN        BIT(11)
> +#define        ASPEED_PTCR_CTRL_PWMG_EN        BIT(10)
> +#define        ASPEED_PTCR_CTRL_PWMF_EN        BIT(9)
> +#define        ASPEED_PTCR_CTRL_PWME_EN        BIT(8)
> +
> +/* ASPEED_PTCR_CLK_EXT_CTRL : 0x44 - Clock Control Extension #1 Register */
> +/* TYPE O */
> +#define ASPEED_PTCR_CLK_CTRL_TYPEO_MASK         GENMASK(15, 0)
> +#define ASPEED_PTCR_CLK_CTRL_TYPEO_UNIT                8
> +#define ASPEED_PTCR_CLK_CTRL_TYPEO_H           4
> +#define ASPEED_PTCR_CLK_CTRL_TYPEO_L           0
> +
> +#define PWM_MAX 255
> +
> +#define M_PWM_DIV_H 0x00
> +#define M_PWM_DIV_L 0x05
> +#define M_PWM_PERIOD 0x5F
> +#define M_TACH_CLK_DIV 0x00
> +#define M_TACH_MODE 0x00
> +#define M_TACH_UNIT 0x1000
> +#define INIT_FAN_CTRL 0xFF
> +
> +struct aspeed_pwm_tacho_regmap {
> +       void __iomem *regs;
> +};
> +
> +struct aspeed_pwm_tacho_data {
> +       struct regmap *regmap;
> +       unsigned long clk_freq;
> +       bool pwm_present[8];
> +       bool fan_tach_present[16];
> +       u8 type_pwm_clock_unit[3];
> +       u8 type_pwm_clock_division_h[3];
> +       u8 type_pwm_clock_division_l[3];
> +       u8 type_fan_tach_clock_division[3];
> +       u16 type_fan_tach_unit[3];
> +       u8 pwm_port_type[8];
> +       u8 pwm_port_fan_ctrl[8];
> +       u8 fan_tach_ch_source[16];
> +       const struct attribute_group *groups[2];
> +};
> +
> +enum type { TYPEM, TYPEN, TYPEO };
> +
> +struct type_params {
> +       u32 l_value;
> +       u32 h_value;
> +       u32 unit_value;
> +       u32 clk_ctrl_mask;
> +       u32 clk_ctrl_reg;
> +       u32 ctrl_reg;
> +       u32 ctrl_reg1;
> +};
> +
> +static const struct type_params type_params[] = {
> +       [TYPEM] = {
> +               .l_value = ASPEED_PTCR_CLK_CTRL_TYPEM_L,
> +               .h_value = ASPEED_PTCR_CLK_CTRL_TYPEM_H,
> +               .unit_value = ASPEED_PTCR_CLK_CTRL_TYPEM_UNIT,
> +               .clk_ctrl_mask = ASPEED_PTCR_CLK_CTRL_TYPEM_MASK,
> +               .clk_ctrl_reg = ASPEED_PTCR_CLK_CTRL,
> +               .ctrl_reg = ASPEED_PTCR_TYPEM_CTRL,
> +               .ctrl_reg1 = ASPEED_PTCR_TYPEM_CTRL1,
> +       },
> +       [TYPEN] = {
> +               .l_value = ASPEED_PTCR_CLK_CTRL_TYPEN_L,
> +               .h_value = ASPEED_PTCR_CLK_CTRL_TYPEN_H,
> +               .unit_value = ASPEED_PTCR_CLK_CTRL_TYPEN_UNIT,
> +               .clk_ctrl_mask = ASPEED_PTCR_CLK_CTRL_TYPEN_MASK,
> +               .clk_ctrl_reg = ASPEED_PTCR_CLK_CTRL,
> +               .ctrl_reg = ASPEED_PTCR_TYPEN_CTRL,
> +               .ctrl_reg1 = ASPEED_PTCR_TYPEN_CTRL1,
> +       },
> +       [TYPEO] = {
> +               .l_value = ASPEED_PTCR_CLK_CTRL_TYPEO_L,
> +               .h_value = ASPEED_PTCR_CLK_CTRL_TYPEO_H,
> +               .unit_value = ASPEED_PTCR_CLK_CTRL_TYPEO_UNIT,
> +               .clk_ctrl_mask = ASPEED_PTCR_CLK_CTRL_TYPEO_MASK,
> +               .clk_ctrl_reg = ASPEED_PTCR_CLK_CTRL_EXT,
> +               .ctrl_reg = ASPEED_PTCR_TYPEO_CTRL,
> +               .ctrl_reg1 = ASPEED_PTCR_TYPEO_CTRL1,
> +       }
> +};
> +
> +enum pwm_port { PWMA, PWMB, PWMC, PWMD, PWME, PWMF, PWMG, PWMH };
> +
> +struct pwm_port_params {
> +       u32 pwm_en;
> +       u32 ctrl_reg;
> +       u32 type_part1;
> +       u32 type_part2;
> +       u32 type_mask;
> +       u32 duty_ctrl_rise_point;
> +       u32 duty_ctrl_fall_point;
> +       u32 duty_ctrl_reg;
> +       u32 duty_ctrl_rise_fall_mask;
> +};
> +
> +static const struct pwm_port_params pwm_port_params[] = {
> +       [PWMA] = {
> +               .pwm_en = ASPEED_PTCR_CTRL_PWMA_EN,
> +               .ctrl_reg = ASPEED_PTCR_CTRL,
> +               .type_part1 = ASPEED_PTCR_CTRL_SET_PWMA_TYPE_PART1,
> +               .type_part2 = ASPEED_PTCR_CTRL_SET_PWMA_TYPE_PART2,
> +               .type_mask = ASPEED_PTCR_CTRL_SET_PWMA_TYPE_MASK,
> +               .duty_ctrl_rise_point = DUTY_CTRL_PWM1_RISE_POINT,
> +               .duty_ctrl_fall_point = DUTY_CTRL_PWM1_FALL_POINT,
> +               .duty_ctrl_reg = ASPEED_PTCR_DUTY0_CTRL,
> +               .duty_ctrl_rise_fall_mask = DUTY_CTRL_PWM1_RISE_FALL_MASK,
> +       },
> +       [PWMB] = {
> +               .pwm_en = ASPEED_PTCR_CTRL_PWMB_EN,
> +               .ctrl_reg = ASPEED_PTCR_CTRL,
> +               .type_part1 = ASPEED_PTCR_CTRL_SET_PWMB_TYPE_PART1,
> +               .type_part2 = ASPEED_PTCR_CTRL_SET_PWMB_TYPE_PART2,
> +               .type_mask = ASPEED_PTCR_CTRL_SET_PWMB_TYPE_MASK,
> +               .duty_ctrl_rise_point = DUTY_CTRL_PWM2_RISE_POINT,
> +               .duty_ctrl_fall_point = DUTY_CTRL_PWM2_FALL_POINT,
> +               .duty_ctrl_reg = ASPEED_PTCR_DUTY0_CTRL,
> +               .duty_ctrl_rise_fall_mask = DUTY_CTRL_PWM2_RISE_FALL_MASK,
> +       },
> +       [PWMC] = {
> +               .pwm_en = ASPEED_PTCR_CTRL_PWMC_EN,
> +               .ctrl_reg = ASPEED_PTCR_CTRL,
> +               .type_part1 = ASPEED_PTCR_CTRL_SET_PWMC_TYPE_PART1,
> +               .type_part2 = ASPEED_PTCR_CTRL_SET_PWMC_TYPE_PART2,
> +               .type_mask = ASPEED_PTCR_CTRL_SET_PWMC_TYPE_MASK,
> +               .duty_ctrl_rise_point = DUTY_CTRL_PWM1_RISE_POINT,
> +               .duty_ctrl_fall_point = DUTY_CTRL_PWM1_FALL_POINT,
> +               .duty_ctrl_reg = ASPEED_PTCR_DUTY1_CTRL,
> +               .duty_ctrl_rise_fall_mask = DUTY_CTRL_PWM1_RISE_FALL_MASK,
> +       },
> +       [PWMD] = {
> +               .pwm_en = ASPEED_PTCR_CTRL_PWMD_EN,
> +               .ctrl_reg = ASPEED_PTCR_CTRL,
> +               .type_part1 = ASPEED_PTCR_CTRL_SET_PWMD_TYPE_PART1,
> +               .type_part2 = ASPEED_PTCR_CTRL_SET_PWMD_TYPE_PART2,
> +               .type_mask = ASPEED_PTCR_CTRL_SET_PWMD_TYPE_MASK,
> +               .duty_ctrl_rise_point = DUTY_CTRL_PWM2_RISE_POINT,
> +               .duty_ctrl_fall_point = DUTY_CTRL_PWM2_FALL_POINT,
> +               .duty_ctrl_reg = ASPEED_PTCR_DUTY1_CTRL,
> +               .duty_ctrl_rise_fall_mask = DUTY_CTRL_PWM2_RISE_FALL_MASK,
> +       },
> +       [PWME] = {
> +               .pwm_en = ASPEED_PTCR_CTRL_PWME_EN,
> +               .ctrl_reg = ASPEED_PTCR_CTRL_EXT,
> +               .type_part1 = ASPEED_PTCR_CTRL_SET_PWME_TYPE_PART1,
> +               .type_part2 = ASPEED_PTCR_CTRL_SET_PWME_TYPE_PART2,
> +               .type_mask = ASPEED_PTCR_CTRL_SET_PWME_TYPE_MASK,
> +               .duty_ctrl_rise_point = DUTY_CTRL_PWM1_RISE_POINT,
> +               .duty_ctrl_fall_point = DUTY_CTRL_PWM1_FALL_POINT,
> +               .duty_ctrl_reg = ASPEED_PTCR_DUTY2_CTRL,
> +               .duty_ctrl_rise_fall_mask = DUTY_CTRL_PWM1_RISE_FALL_MASK,
> +       },
> +       [PWMF] = {
> +               .pwm_en = ASPEED_PTCR_CTRL_PWMF_EN,
> +               .ctrl_reg = ASPEED_PTCR_CTRL_EXT,
> +               .type_part1 = ASPEED_PTCR_CTRL_SET_PWMF_TYPE_PART1,
> +               .type_part2 = ASPEED_PTCR_CTRL_SET_PWMF_TYPE_PART2,
> +               .type_mask = ASPEED_PTCR_CTRL_SET_PWMF_TYPE_MASK,
> +               .duty_ctrl_rise_point = DUTY_CTRL_PWM2_RISE_POINT,
> +               .duty_ctrl_fall_point = DUTY_CTRL_PWM2_FALL_POINT,
> +               .duty_ctrl_reg = ASPEED_PTCR_DUTY2_CTRL,
> +               .duty_ctrl_rise_fall_mask = DUTY_CTRL_PWM2_RISE_FALL_MASK,
> +       },
> +       [PWMG] = {
> +               .pwm_en = ASPEED_PTCR_CTRL_PWMG_EN,
> +               .ctrl_reg = ASPEED_PTCR_CTRL_EXT,
> +               .type_part1 = ASPEED_PTCR_CTRL_SET_PWMG_TYPE_PART1,
> +               .type_part2 = ASPEED_PTCR_CTRL_SET_PWMG_TYPE_PART2,
> +               .type_mask = ASPEED_PTCR_CTRL_SET_PWMG_TYPE_MASK,
> +               .duty_ctrl_rise_point = DUTY_CTRL_PWM1_RISE_POINT,
> +               .duty_ctrl_fall_point = DUTY_CTRL_PWM1_FALL_POINT,
> +               .duty_ctrl_reg = ASPEED_PTCR_DUTY3_CTRL,
> +               .duty_ctrl_rise_fall_mask = DUTY_CTRL_PWM1_RISE_FALL_MASK,
> +       },
> +       [PWMH] = {
> +               .pwm_en = ASPEED_PTCR_CTRL_PWMH_EN,
> +               .ctrl_reg = ASPEED_PTCR_CTRL_EXT,
> +               .type_part1 = ASPEED_PTCR_CTRL_SET_PWMH_TYPE_PART1,
> +               .type_part2 = ASPEED_PTCR_CTRL_SET_PWMH_TYPE_PART2,
> +               .type_mask = ASPEED_PTCR_CTRL_SET_PWMH_TYPE_MASK,
> +               .duty_ctrl_rise_point = DUTY_CTRL_PWM2_RISE_POINT,
> +               .duty_ctrl_fall_point = DUTY_CTRL_PWM2_FALL_POINT,
> +               .duty_ctrl_reg = ASPEED_PTCR_DUTY3_CTRL,
> +               .duty_ctrl_rise_fall_mask = DUTY_CTRL_PWM2_RISE_FALL_MASK,
> +       }
> +};
> +
> +static int regmap_aspeed_pwm_tacho_reg_write(void *context, unsigned int reg,
> +                                            unsigned int val)
> +{
> +       struct aspeed_pwm_tacho_regmap *hregmap = context;
> +
> +       writel(val, hregmap->regs + reg);
> +       return 0;
> +}
> +
> +static int regmap_aspeed_pwm_tacho_reg_read(void *context, unsigned int reg,
> +                                           unsigned int *val)
> +{
> +       struct aspeed_pwm_tacho_regmap *hregmap = context;
> +
> +       *val = readl(hregmap->regs + reg);
> +       return 0;
> +}
> +
> +static const struct regmap_config aspeed_pwm_tacho_regmap_config = {
> +       .reg_bits = 32,
> +       .val_bits = 32,
> +       .reg_stride = 4,
> +       .max_register = ASPEED_PTCR_TYPEO_LIMIT,
> +       .reg_write = regmap_aspeed_pwm_tacho_reg_write,
> +       .reg_read = regmap_aspeed_pwm_tacho_reg_read,
> +       .fast_io = true,
> +};
> +
> +static void aspeed_set_clock_enable(struct regmap *regmap, bool val)
> +{
> +       regmap_update_bits(regmap, ASPEED_PTCR_CTRL,
> +                          ASPEED_PTCR_CTRL_CLK_EN,
> +                          val ? ASPEED_PTCR_CTRL_CLK_EN : 0);
> +}
> +
> +static void aspeed_set_clock_source(struct regmap *regmap, int val)
> +{
> +       regmap_update_bits(regmap, ASPEED_PTCR_CTRL,
> +                          ASPEED_PTCR_CTRL_CLK_SRC,
> +                          val ? ASPEED_PTCR_CTRL_CLK_SRC : 0);
> +}
> +
> +static void aspeed_set_pwm_clock_values(struct regmap *regmap, u8 type,
> +                                       u8 div_high, u8 div_low, u8 unit)
> +{
> +       u32 reg_value = ((div_high << type_params[type].h_value) |
> +                        (div_low << type_params[type].l_value) |
> +                        (unit << type_params[type].unit_value));
> +
> +       regmap_update_bits(regmap, type_params[type].clk_ctrl_reg,
> +                          type_params[type].clk_ctrl_mask, reg_value);
> +}
> +
> +static void aspeed_set_pwm_port_enable(struct regmap *regmap, u8 pwm_port,
> +                                      bool enable)
> +{
> +       regmap_update_bits(regmap, pwm_port_params[pwm_port].ctrl_reg,
> +                          pwm_port_params[pwm_port].pwm_en,
> +                          enable ? pwm_port_params[pwm_port].pwm_en : 0);
> +}
> +
> +static void aspeed_set_pwm_port_type(struct regmap *regmap,
> +                                    u8 pwm_port, u8 type)
> +{
> +       u32 reg_value = (type & 0x1) << pwm_port_params[pwm_port].type_part1;
> +
> +       reg_value |= (type & 0x2) << pwm_port_params[pwm_port].type_part2;
> +
> +       regmap_update_bits(regmap, pwm_port_params[pwm_port].ctrl_reg,
> +                          pwm_port_params[pwm_port].type_mask, reg_value);
> +}
> +
> +static void aspeed_set_pwm_port_duty_rising_falling(struct regmap *regmap,
> +                                                   u8 pwm_port, u8 rising,
> +                                                   u8 falling)
> +{
> +       u32 reg_value = (rising <<
> +                        pwm_port_params[pwm_port].duty_ctrl_rise_point);
> +       reg_value |= (falling <<
> +                     pwm_port_params[pwm_port].duty_ctrl_fall_point);
> +
> +       regmap_update_bits(regmap, pwm_port_params[pwm_port].duty_ctrl_reg,
> +                          pwm_port_params[pwm_port].duty_ctrl_rise_fall_mask,
> +                          reg_value);
> +}
> +
> +static void aspeed_set_tacho_type_enable(struct regmap *regmap, u8 type,
> +                                        bool enable)
> +{
> +       regmap_update_bits(regmap, type_params[type].ctrl_reg,
> +                          TYPE_CTRL_FAN_TYPE_EN,
> +                          enable ? TYPE_CTRL_FAN_TYPE_EN : 0);
> +}
> +
> +static void aspeed_set_tacho_type_values(struct regmap *regmap, u8 type,
> +                                        u8 mode, u16 unit, u8 division)
> +{
> +       u32 reg_value = ((mode << TYPE_CTRL_FAN_MODE) |
> +                        (unit << TYPE_CTRL_FAN_PERIOD) |
> +                        (division << TYPE_CTRL_FAN_DIVISION));
> +
> +       regmap_update_bits(regmap, type_params[type].ctrl_reg,
> +                          TYPE_CTRL_FAN_MASK, reg_value);
> +       regmap_update_bits(regmap, type_params[type].ctrl_reg1,
> +                          TYPE_CTRL_FAN1_MASK, unit << 16);
> +}
> +
> +static void aspeed_set_fan_tach_ch_enable(struct regmap *regmap, u8 fan_tach_ch,
> +                                         bool enable)
> +{
> +       regmap_update_bits(regmap, ASPEED_PTCR_CTRL,
> +                          ASPEED_PTCR_CTRL_FAN_NUM_EN(fan_tach_ch),
> +                          enable ?
> +                          ASPEED_PTCR_CTRL_FAN_NUM_EN(fan_tach_ch) : 0);
> +}
> +
> +static void aspeed_set_fan_tach_ch_source(struct regmap *regmap, u8 fan_tach_ch,
> +                                         u8 fan_tach_ch_source)
> +{
> +       u32 reg_value1 = ((fan_tach_ch_source & 0x3) <<
> +                         TACH_PWM_SOURCE_BIT01(fan_tach_ch));
> +       u32 reg_value2 = (((fan_tach_ch_source & 0x4) >> 2) <<
> +                         TACH_PWM_SOURCE_BIT2(fan_tach_ch));
> +
> +       regmap_update_bits(regmap, ASPEED_PTCR_TACH_SOURCE,
> +                          TACH_PWM_SOURCE_MASK_BIT01(fan_tach_ch),
> +                          reg_value1);
> +
> +       regmap_update_bits(regmap, ASPEED_PTCR_TACH_SOURCE_EXT,
> +                          TACH_PWM_SOURCE_MASK_BIT2(fan_tach_ch),
> +                          reg_value2);
> +}
> +
> +static void aspeed_set_pwm_port_fan_ctrl(struct aspeed_pwm_tacho_data *priv,
> +                                        u8 index, u8 fan_ctrl)
> +{
> +       u16 period, dc_time_on;
> +
> +       period = priv->type_pwm_clock_unit[priv->pwm_port_type[index]];
> +       period += 1;
> +       dc_time_on = (fan_ctrl * period) / PWM_MAX;
> +
> +       if (dc_time_on == 0) {
> +               aspeed_set_pwm_port_enable(priv->regmap, index, false);
> +       } else {
> +               if (dc_time_on == period)
> +                       dc_time_on = 0;
> +
> +               aspeed_set_pwm_port_duty_rising_falling(priv->regmap, index, 0,
> +                                                       dc_time_on);
> +               aspeed_set_pwm_port_enable(priv->regmap, index, true);
> +       }
> +}
> +
> +static u32 aspeed_get_fan_tach_ch_measure_period(struct aspeed_pwm_tacho_data
> +                                                *priv, u8 type)
> +{
> +       u32 clk;
> +       u16 tacho_unit;
> +       u8 clk_unit, div_h, div_l, tacho_div;
> +
> +       clk = priv->clk_freq;
> +       clk_unit = priv->type_pwm_clock_unit[type];
> +       div_h = priv->type_pwm_clock_division_h[type];
> +       div_h = 0x1 << div_h;
> +       div_l = priv->type_pwm_clock_division_l[type];
> +       if (div_l == 0)
> +               div_l = 1;
> +       else
> +               div_l = div_l * 2;
> +
> +       tacho_unit = priv->type_fan_tach_unit[type];
> +       tacho_div = priv->type_fan_tach_clock_division[type];
> +
> +       tacho_div = 0x4 << (tacho_div * 2);
> +       return clk / (clk_unit * div_h * div_l * tacho_div * tacho_unit);
> +}
> +
> +static u32 aspeed_get_fan_tach_ch_rpm(struct aspeed_pwm_tacho_data *priv,
> +                                     u8 fan_tach_ch)
> +{
> +       u32 raw_data, tach_div, clk_source, timeout = 0, sec, val;
> +       u8 fan_tach_ch_source, type;
> +
> +       regmap_write(priv->regmap, ASPEED_PTCR_TRIGGER, 0);
> +       regmap_write(priv->regmap, ASPEED_PTCR_TRIGGER, 0x1 << fan_tach_ch);
> +
> +       fan_tach_ch_source = priv->fan_tach_ch_source[fan_tach_ch];
> +       type = priv->pwm_port_type[fan_tach_ch_source];
> +
> +       sec = (1000 / aspeed_get_fan_tach_ch_measure_period(priv, type));
> +
> +       msleep(sec);
> +
> +       regmap_read(priv->regmap, ASPEED_PTCR_RESULT, &val);
> +       while (!(val & RESULT_STATUS_MASK)) {
> +               timeout++;
> +               if (timeout > 1)
> +                       return 0;
> +               msleep(sec);
> +       }
> +
> +       regmap_read(priv->regmap, ASPEED_PTCR_RESULT, &val);
> +       raw_data = val & RESULT_VALUE_MASK;
> +       tach_div = priv->type_fan_tach_clock_division[type];
> +
> +       tach_div = 0x4 << (tach_div * 2);
> +       clk_source = priv->clk_freq;
> +
> +       if (raw_data == 0)
> +               return 0;
> +       else
> +               return (clk_source * 60) / (2 * raw_data * tach_div);
> +}
> +
> +static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
> +                      const char *buf, size_t count)
> +{
> +       struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
> +       int index = sensor_attr->index;
> +       int ret;
> +       struct aspeed_pwm_tacho_data *priv = dev_get_drvdata(dev);
> +       long fan_ctrl;
> +
> +       ret = kstrtol(buf, 10, &fan_ctrl);
> +       if (ret != 0)
> +               return ret;
> +
> +       if (fan_ctrl < 0 || fan_ctrl > PWM_MAX)
> +               return -EINVAL;
> +
> +       if (priv->pwm_port_fan_ctrl[index] == fan_ctrl)
> +               return count;
> +
> +       priv->pwm_port_fan_ctrl[index] = fan_ctrl;
> +       aspeed_set_pwm_port_fan_ctrl(priv, index, fan_ctrl);
> +
> +       return count;
> +}
> +
> +static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
> +                       char *buf)
> +{
> +       struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
> +       int index = sensor_attr->index;
> +       struct aspeed_pwm_tacho_data *priv = dev_get_drvdata(dev);
> +
> +       return sprintf(buf, "%u\n", priv->pwm_port_fan_ctrl[index]);
> +}
> +
> +static ssize_t show_rpm(struct device *dev, struct device_attribute *attr,
> +                       char *buf)
> +{
> +       struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
> +       int index = sensor_attr->index;
> +       u32 rpm;
> +       struct aspeed_pwm_tacho_data *priv = dev_get_drvdata(dev);
> +
> +       rpm = aspeed_get_fan_tach_ch_rpm(priv, index);
> +
> +       return sprintf(buf, "%u\n", rpm);
> +}
> +
> +static umode_t pwm_is_visible(struct kobject *kobj,
> +                             struct attribute *a, int index)
> +{
> +       struct device *dev = container_of(kobj, struct device, kobj);
> +       struct aspeed_pwm_tacho_data *priv = dev_get_drvdata(dev);
> +
> +       if (!priv->pwm_present[index])
> +               return 0;
> +       return a->mode;
> +}
> +
> +static umode_t fan_dev_is_visible(struct kobject *kobj,
> +                                 struct attribute *a, int index)
> +{
> +       struct device *dev = container_of(kobj, struct device, kobj);
> +       struct aspeed_pwm_tacho_data *priv = dev_get_drvdata(dev);
> +
> +       if (!priv->fan_tach_present[index])
> +               return 0;
> +       return a->mode;
> +}
> +
> +static SENSOR_DEVICE_ATTR(pwm0, 0644,
> +                       show_pwm, set_pwm, 0);
> +static SENSOR_DEVICE_ATTR(pwm1, 0644,
> +                       show_pwm, set_pwm, 1);
> +static SENSOR_DEVICE_ATTR(pwm2, 0644,
> +                       show_pwm, set_pwm, 2);
> +static SENSOR_DEVICE_ATTR(pwm3, 0644,
> +                       show_pwm, set_pwm, 3);
> +static SENSOR_DEVICE_ATTR(pwm4, 0644,
> +                       show_pwm, set_pwm, 4);
> +static SENSOR_DEVICE_ATTR(pwm5, 0644,
> +                       show_pwm, set_pwm, 5);
> +static SENSOR_DEVICE_ATTR(pwm6, 0644,
> +                       show_pwm, set_pwm, 6);
> +static SENSOR_DEVICE_ATTR(pwm7, 0644,
> +                       show_pwm, set_pwm, 7);
> +
> +static struct attribute *pwm_dev_attrs[] = {
> +       &sensor_dev_attr_pwm0.dev_attr.attr,
> +       &sensor_dev_attr_pwm1.dev_attr.attr,
> +       &sensor_dev_attr_pwm2.dev_attr.attr,
> +       &sensor_dev_attr_pwm3.dev_attr.attr,
> +       &sensor_dev_attr_pwm4.dev_attr.attr,
> +       &sensor_dev_attr_pwm5.dev_attr.attr,
> +       &sensor_dev_attr_pwm6.dev_attr.attr,
> +       &sensor_dev_attr_pwm7.dev_attr.attr,
> +       NULL,
> +};
> +
> +static const struct attribute_group pwm_dev_group = {
> +       .attrs = pwm_dev_attrs,
> +       .is_visible = pwm_is_visible,
> +};
> +
> +static SENSOR_DEVICE_ATTR(fan0_input, 0444,
> +               show_rpm, NULL, 0);
> +static SENSOR_DEVICE_ATTR(fan1_input, 0444,
> +               show_rpm, NULL, 1);
> +static SENSOR_DEVICE_ATTR(fan2_input, 0444,
> +               show_rpm, NULL, 2);
> +static SENSOR_DEVICE_ATTR(fan3_input, 0444,
> +               show_rpm, NULL, 3);
> +static SENSOR_DEVICE_ATTR(fan4_input, 0444,
> +               show_rpm, NULL, 4);
> +static SENSOR_DEVICE_ATTR(fan5_input, 0444,
> +               show_rpm, NULL, 5);
> +static SENSOR_DEVICE_ATTR(fan6_input, 0444,
> +               show_rpm, NULL, 6);
> +static SENSOR_DEVICE_ATTR(fan7_input, 0444,
> +               show_rpm, NULL, 7);
> +static SENSOR_DEVICE_ATTR(fan8_input, 0444,
> +               show_rpm, NULL, 8);
> +static SENSOR_DEVICE_ATTR(fan9_input, 0444,
> +               show_rpm, NULL, 9);
> +static SENSOR_DEVICE_ATTR(fan10_input, 0444,
> +               show_rpm, NULL, 10);
> +static SENSOR_DEVICE_ATTR(fan11_input, 0444,
> +               show_rpm, NULL, 11);
> +static SENSOR_DEVICE_ATTR(fan12_input, 0444,
> +               show_rpm, NULL, 12);
> +static SENSOR_DEVICE_ATTR(fan13_input, 0444,
> +               show_rpm, NULL, 13);
> +static SENSOR_DEVICE_ATTR(fan14_input, 0444,
> +               show_rpm, NULL, 14);
> +static SENSOR_DEVICE_ATTR(fan15_input, 0444,
> +               show_rpm, NULL, 15);
> +
> +static struct attribute *fan_dev_attrs[] = {
> +       &sensor_dev_attr_fan0_input.dev_attr.attr,
> +       &sensor_dev_attr_fan1_input.dev_attr.attr,
> +       &sensor_dev_attr_fan2_input.dev_attr.attr,
> +       &sensor_dev_attr_fan3_input.dev_attr.attr,
> +       &sensor_dev_attr_fan4_input.dev_attr.attr,
> +       &sensor_dev_attr_fan5_input.dev_attr.attr,
> +       &sensor_dev_attr_fan6_input.dev_attr.attr,
> +       &sensor_dev_attr_fan7_input.dev_attr.attr,
> +       &sensor_dev_attr_fan8_input.dev_attr.attr,
> +       &sensor_dev_attr_fan9_input.dev_attr.attr,
> +       &sensor_dev_attr_fan10_input.dev_attr.attr,
> +       &sensor_dev_attr_fan11_input.dev_attr.attr,
> +       &sensor_dev_attr_fan12_input.dev_attr.attr,
> +       &sensor_dev_attr_fan13_input.dev_attr.attr,
> +       &sensor_dev_attr_fan14_input.dev_attr.attr,
> +       &sensor_dev_attr_fan15_input.dev_attr.attr,
> +       NULL
> +};
> +
> +static const struct attribute_group fan_dev_group = {
> +       .attrs = fan_dev_attrs,
> +       .is_visible = fan_dev_is_visible,
> +};
> +
> +/*
> + * The clock type is type M :
> + * The PWM frequency = 24MHz / (type M clock division L bit *
> + * type M clock division H bit * (type M PWM period bit + 1))
> + */
> +static void aspeed_create_type(struct aspeed_pwm_tacho_data *priv)
> +{
> +       priv->type_pwm_clock_division_h[TYPEM] = M_PWM_DIV_H;
> +       priv->type_pwm_clock_division_l[TYPEM] = M_PWM_DIV_L;
> +       priv->type_pwm_clock_unit[TYPEM] = M_PWM_PERIOD;
> +       aspeed_set_pwm_clock_values(priv->regmap, TYPEM, M_PWM_DIV_H,
> +                                   M_PWM_DIV_L, M_PWM_PERIOD);
> +       aspeed_set_tacho_type_enable(priv->regmap, TYPEM, true);
> +       priv->type_fan_tach_clock_division[TYPEM] = M_TACH_CLK_DIV;
> +       priv->type_fan_tach_unit[TYPEM] = M_TACH_UNIT;
> +       aspeed_set_tacho_type_values(priv->regmap, TYPEM, M_TACH_MODE,
> +                                    M_TACH_UNIT, M_TACH_CLK_DIV);
> +}
> +
> +static void aspeed_create_pwm_port(struct aspeed_pwm_tacho_data *priv,
> +                                  u8 pwm_port)
> +{
> +       aspeed_set_pwm_port_enable(priv->regmap, pwm_port, true);
> +       priv->pwm_present[pwm_port] = true;
> +
> +       priv->pwm_port_type[pwm_port] = TYPEM;
> +       aspeed_set_pwm_port_type(priv->regmap, pwm_port, TYPEM);
> +
> +       priv->pwm_port_fan_ctrl[pwm_port] = INIT_FAN_CTRL;
> +       aspeed_set_pwm_port_fan_ctrl(priv, pwm_port, INIT_FAN_CTRL);
> +}
> +
> +static void aspeed_create_fan_tach_channel(struct aspeed_pwm_tacho_data *priv,
> +                                          u8 *fan_tach_ch,
> +                                          int count,
> +                                          u8 pwm_source)
> +{
> +       u8 val, index;
> +
> +       for (val = 0; val < count; val++) {
> +               index = fan_tach_ch[val];
> +               aspeed_set_fan_tach_ch_enable(priv->regmap, index, true);
> +               priv->fan_tach_present[index] = true;
> +               priv->fan_tach_ch_source[index] = pwm_source;
> +               aspeed_set_fan_tach_ch_source(priv->regmap, index, pwm_source);
> +       }
> +}
> +
> +static int aspeed_create_fan(struct device *dev,
> +                            struct device_node *child,
> +                            struct aspeed_pwm_tacho_data *priv)
> +{
> +       u8 *fan_tach_ch;
> +       u32 pwm_port;
> +       int ret, count;
> +
> +       ret = of_property_read_u32(child, "reg", &pwm_port);
> +       if (ret)
> +               return ret;
> +       aspeed_create_pwm_port(priv, (u8)pwm_port);
> +
> +       count = of_property_count_u8_elems(child, "aspeed-fan-tach-ch");
> +       if (count < 1)
> +               return -EINVAL;
> +       fan_tach_ch = devm_kzalloc(dev, sizeof(*fan_tach_ch) * count,
> +                                  GFP_KERNEL);
> +       if (!fan_tach_ch)
> +               return -ENOMEM;
> +       ret = of_property_read_u8_array(child, "aspeed-fan-tach-ch",
> +                                       fan_tach_ch, count);
> +       if (ret)
> +               return ret;
> +       aspeed_create_fan_tach_channel(priv, fan_tach_ch, count, pwm_port);
> +
> +       return 0;
> +}
> +
> +static int aspeed_pwm_tacho_probe(struct platform_device *pdev)
> +{
> +       struct device *dev = &pdev->dev;
> +       struct device_node *np, *child;
> +       struct aspeed_pwm_tacho_data *priv;
> +       struct aspeed_pwm_tacho_regmap *hregmap;
> +       struct resource *res;
> +       struct device *hwmon;
> +       struct clk *clk;
> +       int ret;
> +
> +       np = dev->of_node;
> +
> +       hregmap = devm_kzalloc(dev, sizeof(*hregmap), GFP_KERNEL);
> +       if (!hregmap)
> +               return -ENOMEM;
> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       if (!res)
> +               return -ENOENT;
> +       hregmap->regs = devm_ioremap_resource(dev, res);
> +       if (IS_ERR(hregmap->regs))
> +               return PTR_ERR(hregmap->regs);
> +       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +       if (!priv)
> +               return -ENOMEM;
> +       priv->regmap = devm_regmap_init(dev, NULL, hregmap,
> +                       &aspeed_pwm_tacho_regmap_config);
> +       if (IS_ERR(priv->regmap))
> +               return PTR_ERR(priv->regmap);
> +       regmap_write(priv->regmap, ASPEED_PTCR_TACH_SOURCE, 0);
> +       regmap_write(priv->regmap, ASPEED_PTCR_TACH_SOURCE_EXT, 0);
> +
> +       clk = devm_clk_get(dev, NULL);
> +       if (IS_ERR(clk))
> +               return -ENODEV;
> +       priv->clk_freq = clk_get_rate(clk);
> +       aspeed_set_clock_enable(priv->regmap, true);
> +       aspeed_set_clock_source(priv->regmap, 0);
> +
> +       aspeed_create_type(priv);
> +
> +       for_each_child_of_node(np, child) {
> +               ret = aspeed_create_fan(dev, child, priv);
> +               of_node_put(child);
> +               if (ret)
> +                       return ret;
> +       }
> +       of_node_put(np);
> +
> +       priv->groups[0] = &pwm_dev_group;
> +       priv->groups[1] = &fan_dev_group;
> +       hwmon = devm_hwmon_device_register_with_groups(dev,
> +                                                      "aspeed_pwm_tacho",
> +                                                      priv, priv->groups);
> +
> +       return PTR_ERR_OR_ZERO(hwmon);
> +}
> +
> +static const struct of_device_id of_pwm_tacho_match_table[] = {
> +       { .compatible = "aspeed,ast2400-pwm-tacho", },
> +       { .compatible = "aspeed,ast2500-pwm-tacho", },
> +       {},
> +};
> +MODULE_DEVICE_TABLE(of, of_pwm_tacho_match_table);
> +
> +static struct platform_driver aspeed_pwm_tacho_driver = {
> +       .probe          = aspeed_pwm_tacho_probe,
> +       .driver         = {
> +               .name   = "aspeed_pwm_tacho",
> +               .of_match_table = of_pwm_tacho_match_table,
> +       },
> +};
> +
> +module_platform_driver(aspeed_pwm_tacho_driver);
> +
> +MODULE_AUTHOR("Jaghathiswari Rankappagounder Natarajan <jaghu at google.com>");
> +MODULE_DESCRIPTION("ASPEED PWM and Fan Tacho device driver");
> +MODULE_LICENSE("GPL");
> --
> 2.12.1.578.ge9c3154ca4-goog
>


More information about the openbmc mailing list