[PATCH linux dev-4.10] drivers/hwmon: MAX31785 Provide config of fault pin bevavior

Andrew Jeffery andrew at aj.id.au
Fri Jun 2 10:24:12 AEST 2017


On Thu, 2017-06-01 at 15:06 -0500, Christopher Bostic wrote:
> Provide interface to set behavior when FAULT pin is asserted.
> When enabled force fan to 100% PWM duty cycle.
> 

I'll apply this on top of my rework of the driver and send both later
today.

Cheers,

Andrew

> Signed-off-by: Christopher Bostic <cbostic at linux.vnet.ibm.com>
> ---
>  drivers/hwmon/max31785.c | 70 ++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 70 insertions(+)
> 
> diff --git a/drivers/hwmon/max31785.c b/drivers/hwmon/max31785.c
> index fb7b3f0..9b42ce5 100644
> --- a/drivers/hwmon/max31785.c
> +++ b/drivers/hwmon/max31785.c
> @@ -37,6 +37,7 @@
> >  #define MAX31785_REG_FAN_SPEED_1		0x90
> >  #define MAX31785_REG_MFR_ID			0x99
> >  #define MAX31785_REG_MFR_MODEL			0x9a
> > +#define MAX31785_REG_MFR_FAULT_RESP		0xd9
> >  #define MAX31785_REG_MFR_FAN_CONFIG		0xf1
> >  #define MAX31785_REG_READ_FAN_PWM		0xf3
>  
> @@ -50,6 +51,9 @@
>  /* Fan Status register bits */
> >  #define MAX31785_FAN_STATUS_FAULT_MASK		0x80
>  
> +/* Fault response register bits */
> > +#define MAX31785_FAULT_RESP_PIN_MONITOR		0x01
> +
>  /* Fan Command constants */
> >  #define MAX31785_FAN_COMMAND_PWM_RATIO		40
>  
> @@ -657,6 +661,68 @@ static int max31785_detect(struct i2c_client *client,
> >  	return 0;
>  }
>  
> +static ssize_t fault_resp_store(struct device *dev,
> > +				struct device_attribute *attr, const char *buf,
> > +				size_t count)
> +{
> > +	struct i2c_client *client = to_i2c_client(dev);
> > +	int rv;
> +
> > +	rv = max31785_set_page(client, 0);
> > +	if (rv < 0)
> > +		return rv;
> +
> > +	rv = i2c_smbus_read_byte_data(client, MAX31785_REG_MFR_FAULT_RESP);
> > +	if (rv < 0)
> > +		return rv;
> +
> > +	if (!strncmp(buf, "on", strlen("on"))) {
> > +		if (!(rv & MAX31785_FAULT_RESP_PIN_MONITOR)) {
> > +			rv |= MAX31785_FAULT_RESP_PIN_MONITOR;
> > +			rv = i2c_smbus_write_byte_data(client,
> > +					MAX31785_REG_MFR_FAULT_RESP, rv);
> > +			if (rv < 0)
> > +				return rv;
> > +		}
> > +	} else if (!strncmp(buf, "off", strlen("off"))) {
> > +		if (rv & MAX31785_FAULT_RESP_PIN_MONITOR) {
> > +			rv &= ~MAX31785_FAULT_RESP_PIN_MONITOR;
> > +			rv = i2c_smbus_write_byte_data(client,
> > +					MAX31785_REG_MFR_FAULT_RESP, rv);
> > +			if (rv < 0)
> > +				return rv;
> > +		}
> > +	} else {
> > +		dev_warn(dev, "Unknown fault response type: [%s]\n", buf);
> > +		return -EINVAL;
> > +	}
> > +	return count;
> +}
> +
> +static ssize_t fault_resp_show(struct device *dev,
> > +			       struct device_attribute *attr, char *buf)
> +{
> > +	struct i2c_client *client = to_i2c_client(dev);
> > +	int rv;
> +
> > +	rv = max31785_set_page(client, 0);
> > +	if (rv < 0)
> > +		return rv;
> +
> > +	rv = i2c_smbus_read_byte_data(client, MAX31785_REG_MFR_FAULT_RESP);
> > +	if (rv < 0)
> > +		return rv;
> +
> > +	if (rv & MAX31785_FAULT_RESP_PIN_MONITOR)
> > +		rv = sprintf(buf, "on\n");
> > +	else
> > +		rv = sprintf(buf, "off\n");
> +
> > +	return rv;
> +}
> +
> +static DEVICE_ATTR(fault_resp, 0644, fault_resp_show, fault_resp_store);
> +
>  static int max31785_probe(struct i2c_client *client,
> >  			  const struct i2c_device_id *id)
>  {
> @@ -684,6 +750,10 @@ static int max31785_probe(struct i2c_client *client,
> >  	if (err)
> >  		return err;
>  
> > +	err = device_create_file(dev, &dev_attr_fault_resp);
> > +	if (err)
> > +		return err;
> +
> >  	hwmon_dev = devm_hwmon_device_register_with_groups(dev,
> >  			client->name, data, max31785_groups);
>  
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: This is a digitally signed message part
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20170602/f2a8c0ed/attachment-0001.sig>


More information about the openbmc mailing list