[PATCH linux dev-4.10 v3 0/4] Witherspoon WDTRST1 enablement

[Andrew Jeffery]

Hello,

v3 corrects some glaring flaws in v2 that I'm going to blame on hacking too
late at night. Critically:

* Use the right bit patterns to select push-pull vs open-drain, active-high vs
  active low.
* Fix some wording in the bindings.
* Specify the external signal pulse as active-high in the devicetree.

Matt(s): Please test and report back. I'll send the patches upstream if they're
fit-for-purpose.

Cheers,

Andrew

Andrew Jeffery (4):
  ARM: aspeed: Request WDTRST1 pinctrl function
  dt-bindings: watchdog: aspeed: External reset signal properties
  watchdog: aspeed: Support configuration of external signal properties
  ARM: dts: aspeed: Witherspoon WDT1 external signal is push-pull

 .../devicetree/bindings/watchdog/aspeed-wdt.txt    | 10 +++++-
 arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts   |  5 +++
 drivers/watchdog/aspeed_wdt.c                      | 42 ++++++++++++++++++++++
 3 files changed, 56 insertions(+), 1 deletion(-)

-- 
2.11.0