[PATCH linux dev-4.7] dts: aspeed: romulus: Add FSI gpio pins and enable FSI master

[Eddie James]

From: "Edward A. James" <eajames at us.ibm.com>

Add gpio pin config for FSI (source: pdbg romulus pin cfg) and set
status to "okay".

Signed-off-by: Edward A. James <eajames at us.ibm.com>
---
 arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
index c23627e..b39280f 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 
 #include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
 
 / {
 	model = "Romulus BMC";
@@ -19,6 +19,18 @@
 	memory {
 		reg = <0x80000000 0x40000000>;
 	};
+
+	fsi-master {
+		compatible = "ibm,fsi-master", "ibm,fsi-master-gpio";
+
+		status = "okay";
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &fmc {
-- 
1.8.3.1