[PATCH linux dev-4.7 14/14] pinctrl: aspeed: g4: Fix mux configuration for GPIOs AA[4-7], AB[0-7]

Andrew Jeffery andrew at aj.id.au
Fri Feb 3 15:20:13 AEDT 2017


Incorrect video output configuration bits were being tested on pins in
GPIO banks AA and AB for the ROM{8,16} mux functions. The ROM{8,16}
functions are the highest priority for the relevant pins and also the
default function, so we require the relevant video output configuration
be disabled to mux GPIO functionality. As the wrong bits were being
tested a GPIO export would succeed but leave the pin in an unresponsive
state (i.e. value updates were ignored).

This misbehaviour was discovered as part of extending the GPIO
controller's support to cover banks Y, Z, AA, AB and AC (AC in the case
of the g5 SoC).

Fixes: 6d329f14a75f ("pinctrl: aspeed-g4: Add mux configuration for all pins")
Signed-off-by: Andrew Jeffery <andrew at aj.id.au>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
(cherry picked from commit 8ccb6dc6e999008bc5d50bdb5badedd636f58e1c)
---
 drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c | 32 +++++++++++++++---------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
index 09b668415c56..7de596e2b9d4 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
@@ -1615,8 +1615,8 @@ MS_PIN_DECL(L19, GPIOAA3, ROMA13, VPOG3);
 
 #define L20 212
 #define L20_DESC	SIG_DESC_SET(SCUA4, 28)
-SIG_EXPR_DECL(ROMA14, ROM8, L20_DESC, VPO_24_OFF);
-SIG_EXPR_DECL(ROMA14, ROM16, L20_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA14, ROM8, L20_DESC, VPO_OFF_12);
+SIG_EXPR_DECL(ROMA14, ROM16, L20_DESC, VPO_OFF_12);
 SIG_EXPR_LIST_DECL_DUAL(ROMA14, ROM8, ROM16);
 SIG_EXPR_DECL(VPOG4, VPO24, L20_DESC, VPO24_DESC);
 SIG_EXPR_DECL(VPOG4, VPOOFF1, L20_DESC, VPOOFF1_DESC);
@@ -1625,8 +1625,8 @@ MS_PIN_DECL(L20, GPIOAA4, ROMA14, VPOG4);
 
 #define L21 213
 #define L21_DESC	SIG_DESC_SET(SCUA4, 29)
-SIG_EXPR_DECL(ROMA15, ROM8, L21_DESC, VPO_24_OFF);
-SIG_EXPR_DECL(ROMA15, ROM16, L21_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA15, ROM8, L21_DESC, VPO_OFF_12);
+SIG_EXPR_DECL(ROMA15, ROM16, L21_DESC, VPO_OFF_12);
 SIG_EXPR_LIST_DECL_DUAL(ROMA15, ROM8, ROM16);
 SIG_EXPR_DECL(VPOG5, VPO24, L21_DESC, VPO24_DESC);
 SIG_EXPR_DECL(VPOG5, VPOOFF1, L21_DESC, VPOOFF1_DESC);
@@ -1635,8 +1635,8 @@ MS_PIN_DECL(L21, GPIOAA5, ROMA15, VPOG5);
 
 #define T18 214
 #define T18_DESC	SIG_DESC_SET(SCUA4, 30)
-SIG_EXPR_DECL(ROMA16, ROM8, T18_DESC, VPO_24_OFF);
-SIG_EXPR_DECL(ROMA16, ROM16, T18_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA16, ROM8, T18_DESC, VPO_OFF_12);
+SIG_EXPR_DECL(ROMA16, ROM16, T18_DESC, VPO_OFF_12);
 SIG_EXPR_LIST_DECL_DUAL(ROMA16, ROM8, ROM16);
 SIG_EXPR_DECL(VPOG6, VPO24, T18_DESC, VPO24_DESC);
 SIG_EXPR_DECL(VPOG6, VPOOFF1, T18_DESC, VPOOFF1_DESC);
@@ -1645,8 +1645,8 @@ MS_PIN_DECL(T18, GPIOAA6, ROMA16, VPOG6);
 
 #define N18 215
 #define N18_DESC	SIG_DESC_SET(SCUA4, 31)
-SIG_EXPR_DECL(ROMA17, ROM8, N18_DESC, VPO_24_OFF);
-SIG_EXPR_DECL(ROMA17, ROM16, N18_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA17, ROM8, N18_DESC, VPO_OFF_12);
+SIG_EXPR_DECL(ROMA17, ROM16, N18_DESC, VPO_OFF_12);
 SIG_EXPR_LIST_DECL_DUAL(ROMA17, ROM8, ROM16);
 SIG_EXPR_DECL(VPOG7, VPO24, N18_DESC, VPO24_DESC);
 SIG_EXPR_DECL(VPOG7, VPOOFF1, N18_DESC, VPOOFF1_DESC);
@@ -1655,8 +1655,8 @@ MS_PIN_DECL(N18, GPIOAA7, ROMA17, VPOG7);
 
 #define N19 216
 #define N19_DESC	SIG_DESC_SET(SCUA8, 0)
-SIG_EXPR_DECL(ROMA18, ROM8, N19_DESC, VPO_24_OFF);
-SIG_EXPR_DECL(ROMA18, ROM16, N19_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA18, ROM8, N19_DESC, VPO_OFF_12);
+SIG_EXPR_DECL(ROMA18, ROM16, N19_DESC, VPO_OFF_12);
 SIG_EXPR_LIST_DECL_DUAL(ROMA18, ROM8, ROM16);
 SIG_EXPR_DECL(VPOR0, VPO24, N19_DESC, VPO24_DESC);
 SIG_EXPR_DECL(VPOR0, VPOOFF1, N19_DESC, VPOOFF1_DESC);
@@ -1665,8 +1665,8 @@ MS_PIN_DECL(N19, GPIOAB0, ROMA18, VPOR0);
 
 #define M18 217
 #define M18_DESC	SIG_DESC_SET(SCUA8, 1)
-SIG_EXPR_DECL(ROMA19, ROM8, M18_DESC, VPO_24_OFF);
-SIG_EXPR_DECL(ROMA19, ROM16, M18_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA19, ROM8, M18_DESC, VPO_OFF_12);
+SIG_EXPR_DECL(ROMA19, ROM16, M18_DESC, VPO_OFF_12);
 SIG_EXPR_LIST_DECL_DUAL(ROMA19, ROM8, ROM16);
 SIG_EXPR_DECL(VPOR1, VPO24, M18_DESC, VPO24_DESC);
 SIG_EXPR_DECL(VPOR1, VPOOFF1, M18_DESC, VPOOFF1_DESC);
@@ -1675,8 +1675,8 @@ MS_PIN_DECL(M18, GPIOAB1, ROMA19, VPOR1);
 
 #define N22 218
 #define N22_DESC	SIG_DESC_SET(SCUA8, 2)
-SIG_EXPR_DECL(ROMA20, ROM8, N22_DESC, VPO_24_OFF);
-SIG_EXPR_DECL(ROMA20, ROM16, N22_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA20, ROM8, N22_DESC, VPO_OFF_12);
+SIG_EXPR_DECL(ROMA20, ROM16, N22_DESC, VPO_OFF_12);
 SIG_EXPR_LIST_DECL_DUAL(ROMA20, ROM8, ROM16);
 SIG_EXPR_DECL(VPOR2, VPO24, N22_DESC, VPO24_DESC);
 SIG_EXPR_DECL(VPOR2, VPOOFF1, N22_DESC, VPOOFF1_DESC);
@@ -1685,8 +1685,8 @@ MS_PIN_DECL(N22, GPIOAB2, ROMA20, VPOR2);
 
 #define N20 219
 #define N20_DESC	SIG_DESC_SET(SCUA8, 3)
-SIG_EXPR_DECL(ROMA21, ROM8, N20_DESC, VPO_24_OFF);
-SIG_EXPR_DECL(ROMA21, ROM16, N20_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA21, ROM8, N20_DESC, VPO_OFF_12);
+SIG_EXPR_DECL(ROMA21, ROM16, N20_DESC, VPO_OFF_12);
 SIG_EXPR_LIST_DECL_DUAL(ROMA21, ROM8, ROM16);
 SIG_EXPR_DECL(VPOR3, VPO24, N20_DESC, VPO24_DESC);
 SIG_EXPR_DECL(VPOR3, VPOOFF1, N20_DESC, VPOOFF1_DESC);
-- 
2.9.3



More information about the openbmc mailing list