[PATCH linux dev-4.10 v6 3/3] hwmon: (ucd9000) Add debugfs to list mfr_status info
Christopher Bostic
cbostic at linux.vnet.ibm.com
Thu Aug 31 07:49:53 AEST 2017
Expose via files in debugfs the gpiN_fault fields as well as
the entire contents of the mfr_status register. Allows user
space to pull this data for error logging etc...
Signed-off-by: Christopher Bostic <cbostic at linux.vnet.ibm.com>
---
v6 - Remove chip idx values on remove so that we can retain the
same indexes regardless how many times we're bound/unbound.
- Remove type 90160 check when adding debugfs.
v5 - Add unique debugfs dir ID for each ucd9000 sysfs device.
- Change branching return to a !! method.
- Clean up line breaks, other white space.
- Add comments on assumptions made regarding ucd90160 versus other
types.
v2 - Remove mfr_status directory in debugfs and place the files
up in the parent ucd9000 directory.
---
drivers/hwmon/pmbus/ucd9000.c | 160 +++++++++++++++++++++++++++++++++++++++++-
1 file changed, 159 insertions(+), 1 deletion(-)
diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c
index 61abd3a..d5c310f 100644
--- a/drivers/hwmon/pmbus/ucd9000.c
+++ b/drivers/hwmon/pmbus/ucd9000.c
@@ -19,6 +19,7 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/debugfs.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -29,6 +30,7 @@
#include <linux/sysfs.h>
#include <linux/hwmon-sysfs.h>
#include <linux/gpio.h>
+#include <linux/idr.h>
#include "pmbus.h"
enum chips { ucd9000, ucd90120, ucd90124, ucd90160, ucd9090, ucd90910 };
@@ -38,6 +40,7 @@
#define UCD9000_FAN_CONFIG_INDEX 0xe7
#define UCD9000_FAN_CONFIG 0xe8
#define UCD9000_LOGGED_FAULTS 0xea
+#define UCD9000_MFR_STATUS 0xf3
#define UCD9000_GPIO_SELECT 0xfa
#define UCD9000_GPIO_CONFIG 0xfb
#define UCD9000_DEVICE_ID 0xfd
@@ -59,17 +62,29 @@
#define UCD9000_MON_VOLTAGE_HW 4
#define UCD9000_NUM_FAN 4
+#define UCD9000_NAME_SIZE 24
#define UCD9000_GPIO_NAME_LEN 16
#define UCD90160_NUM_GPIOS 26
+#define UCD90160_GPI_COUNT 8
+#define UCD90160_GPI_FAULT_BASE 16
+
+static DEFINE_IDA(ucd9000_ida);
struct ucd9000_data {
u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX];
struct pmbus_driver_info info;
struct gpio_chip gpio;
+ struct dentry *debugfs;
+ int idx;
};
#define to_ucd9000_data(_info) container_of(_info, struct ucd9000_data, info)
+struct ucd9000_debugfs_entry {
+ struct i2c_client *client;
+ u8 index;
+};
+
static int ucd9000_get_fan_config(struct i2c_client *client, int fan)
{
int fan_config = 0;
@@ -297,6 +312,140 @@ static int ucd9000_gpio_direction_output(struct gpio_chip *gc,
return ucd9000_gpio_set_direction(gc, offset, UCD9000_GPIO_OUTPUT, val);
}
+static struct dentry *ucd9000_debugfs_dir;
+
+#if IS_ENABLED(CONFIG_DEBUG_FS)
+static int ucd9000_get_mfr_status(struct i2c_client *client, u32 *buffer)
+{
+ int ret;
+
+ ret = pmbus_set_page(client, 0);
+ if (ret < 0) {
+ dev_err(&client->dev, "pmbus_set_page failed. rc:%d\n", ret);
+
+ return ret;
+ }
+
+ /*
+ * Warning:
+ *
+ * Though not currently supported this will cause stack corruption for
+ * ucd90240! Command reference, page 81:
+ *
+ * With the ucd90120 and ucd90124 devices, this command [MFR_STATUS]
+ * is 2 bytes long (bits 0-15). With the ucd90240 this command is 5
+ * bytes long. With all other devices, it is 4 bytes long.
+ */
+ return i2c_smbus_read_block_data(client, UCD9000_MFR_STATUS,
+ (u8 *)buffer);
+}
+
+static int ucd9000_debugfs_get_mfr_status_bit(void *data, u64 *val)
+{
+ struct ucd9000_debugfs_entry *entry = data;
+ struct i2c_client *client = entry->client;
+ int nr = entry->index;
+ u32 buffer;
+ int ret;
+
+ ret = ucd9000_get_mfr_status(client, &buffer);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to read mfr status. rc:%d\n",
+ ret);
+
+ return ret;
+ }
+
+ *val = !!(ret & BIT(nr));
+
+ return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(ucd9000_debugfs_ops_mfr_status_bit,
+ ucd9000_debugfs_get_mfr_status_bit, NULL, "%1lld\n");
+
+static int ucd9000_debugfs_get_mfr_status_word(void *data, u64 *val)
+{
+ struct ucd9000_debugfs_entry *entry = data;
+ struct i2c_client *client = entry->client;
+ u32 buffer;
+ int ret;
+
+ ret = ucd9000_get_mfr_status(client, &buffer);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to read mfr status. rc:%d\n",
+ ret);
+
+ return ret;
+ }
+
+ *val = ret;
+
+ return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(ucd9000_debugfs_ops_mfr_status_word,
+ ucd9000_debugfs_get_mfr_status_word, NULL, "%08llx\n");
+
+static int ucd9000_init_debugfs(struct i2c_client *client,
+ struct ucd9000_data *data)
+{
+ struct ucd9000_debugfs_entry *entries;
+ char name[UCD9000_NAME_SIZE];
+ int i;
+
+ data->idx = ida_simple_get(&ucd9000_ida, 0, INT_MAX, GFP_KERNEL);
+ scnprintf(name, UCD9000_NAME_SIZE, "ucd9000.%d", data->idx);
+ ucd9000_debugfs_dir = debugfs_create_dir(name, NULL);
+ if (IS_ERR(ucd9000_debugfs_dir)) {
+ dev_warn(&client->dev, "Failed to create debugfs dir: %p\n",
+ ucd9000_debugfs_dir);
+ ucd9000_debugfs_dir = NULL;
+ ida_simple_remove(&ucd9000_ida, data->idx);
+ return 0;
+ }
+
+ /*
+ * Warning:
+ *
+ * Makes assumption we're on a ucd90160 type! entries will be different
+ * sizes for other types.
+ */
+ entries = devm_kzalloc(&client->dev, sizeof(*entries) *
+ (UCD90160_GPI_COUNT + 1) * 10, GFP_KERNEL);
+ if (!entries) {
+ ida_simple_remove(&ucd9000_ida, data->idx);
+ return -ENOMEM;
+ }
+
+ /*
+ * Warning:
+ *
+ * This makes the assumption we're probing a ucd90160 type and how the
+ * GPI information is organized. Needs to account for all other
+ * ucd9000 varieties.
+ */
+ for (i = 0; i < UCD90160_GPI_COUNT; i++) {
+ entries[i].client = client;
+ entries[i].index = UCD90160_GPI_FAULT_BASE + i;
+ scnprintf(name, UCD9000_NAME_SIZE, "gpi%d_alarm", i+1);
+ debugfs_create_file(name, 0444, ucd9000_debugfs_dir,
+ &entries[i],
+ &ucd9000_debugfs_ops_mfr_status_bit);
+ }
+ entries[i].client = client;
+ scnprintf(name, UCD9000_NAME_SIZE, "mfr_status");
+ debugfs_create_file(name, 0444, ucd9000_debugfs_dir, &entries[i],
+ &ucd9000_debugfs_ops_mfr_status_word);
+
+ return 0;
+}
+#else
+static int ucd9000_init_debugfs(struct i2c_client *client,
+ struct ucd9000_data *data)
+{
+ return 0;
+}
+#endif /* IS_ENABLED(CONFIG_DEBUG_FS) */
+
static ssize_t ucd9000_clear_logged_faults(struct device *dev,
struct device_attribute *attr, const char *buf,
size_t count)
@@ -474,12 +623,21 @@ static int ucd9000_probe(struct i2c_client *client,
return ret;
}
- return pmbus_do_probe(client, mid, info);
+ ret = ucd9000_init_debugfs(client, data);
+ if (ret < 0)
+ dev_warn(&client->dev, "Failed to register debugfs: %d\n", ret);
+
+ return pmbus_do_probe(client, mid, info);
}
static int ucd9000_remove(struct i2c_client *client)
{
+ struct ucd9000_data *data
+ = to_ucd9000_data(pmbus_get_driver_info(client));
+
sysfs_remove_group(&client->dev.kobj, &ucd9000_attr_group);
+ ida_simple_remove(&ucd9000_ida, data->idx);
+ debugfs_remove_recursive(ucd9000_debugfs_dir);
return pmbus_do_remove(client);
}
--
1.8.2.2
More information about the openbmc
mailing list