[PATCH linux dev-4.10 v6 1/3] hwmon: (ucd9000) Add interface to clear logged faults.

[Christopher Bostic]

Provide a means for user space to clear out any logged faults
on these types of devices.  Ability to do so allows user to
start with a clean slate at system poweron which can be done
multiple times after this driver loads.

Signed-off-by: Christopher Bostic <cbostic at linux.vnet.ibm.com>
---
 drivers/hwmon/pmbus/ucd9000.c | 49 ++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 48 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c
index 3e3aa95..c401e5b 100644
--- a/drivers/hwmon/pmbus/ucd9000.c
+++ b/drivers/hwmon/pmbus/ucd9000.c
@@ -26,6 +26,8 @@
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pmbus.h>
+#include <linux/sysfs.h>
+#include <linux/hwmon-sysfs.h>
 #include "pmbus.h"
 
 enum chips { ucd9000, ucd90120, ucd90124, ucd90160, ucd9090, ucd90910 };
@@ -34,6 +36,7 @@
 #define UCD9000_NUM_PAGES		0xd6
 #define UCD9000_FAN_CONFIG_INDEX	0xe7
 #define UCD9000_FAN_CONFIG		0xe8
+#define UCD9000_LOGGED_FAULTS		0xea
 #define UCD9000_DEVICE_ID		0xfd
 
 #define UCD9000_MON_TYPE(x)	(((x) >> 5) & 0x07)
@@ -119,6 +122,37 @@ static int ucd9000_read_byte_data(struct i2c_client *client, int page, int reg)
 };
 MODULE_DEVICE_TABLE(i2c, ucd9000_id);
 
+static ssize_t ucd9000_clear_logged_faults(struct device *dev,
+				struct device_attribute *attr, const char *buf,
+				size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret;
+
+	/* No page set required */
+	ret = i2c_smbus_write_byte_data(client, UCD9000_LOGGED_FAULTS, 0);
+	if (ret) {
+		dev_err(&client->dev, "Failed to clear logged faults: %d\n",
+			ret);
+
+		return ret;
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR(clear_logged_faults, 0200, NULL,
+		ucd9000_clear_logged_faults);
+
+static struct attribute *ucd9000_attributes[] = {
+	&dev_attr_clear_logged_faults.attr,
+	NULL
+};
+
+static const struct attribute_group ucd9000_attr_group = {
+	.attrs = ucd9000_attributes,
+};
+
 static int ucd9000_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -227,16 +261,29 @@ static int ucd9000_probe(struct i2c_client *client,
 		  | PMBUS_HAVE_FAN34 | PMBUS_HAVE_STATUS_FAN34;
 	}
 
+	ret = sysfs_create_group(&client->dev.kobj, &ucd9000_attr_group);
+	if (ret < 0) {
+		dev_warn(&client->dev, "Failed to add sysfs files: %d\n", ret);
+
+		return ret;
+	}
+
 	return pmbus_do_probe(client, mid, info);
 }
 
+static int ucd9000_remove(struct i2c_client *client)
+{
+	sysfs_remove_group(&client->dev.kobj, &ucd9000_attr_group);
+	return pmbus_do_remove(client);
+}
+
 /* This is the driver that will be inserted */
 static struct i2c_driver ucd9000_driver = {
 	.driver = {
 		.name = "ucd9000",
 	},
 	.probe = ucd9000_probe,
-	.remove = pmbus_do_remove,
+	.remove = ucd9000_remove,
 	.id_table = ucd9000_id,
 };
 
-- 
1.8.2.2