[PATCH 1/2] dt-bindings: leds: gpio: Add optional retain-state-shutdown property

[Andrew Jeffery]

On BMC systems it's sometimes necessary for a LED to retain its state
across a BMC reset (which is independent of the host system state). Add
a devicetree property to describe this behaviour. The property would
typically be used in conjunction with 'default-state = "keep"'.

Signed-off-by: Andrew Jeffery <andrew at aj.id.au>
---
 Documentation/devicetree/bindings/leds/leds-gpio.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt
index 76535ca37120..a48dda268f81 100644
--- a/Documentation/devicetree/bindings/leds/leds-gpio.txt
+++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt
@@ -18,6 +18,9 @@ LED sub-node properties:
   see Documentation/devicetree/bindings/leds/common.txt
 - retain-state-suspended: (optional) The suspend state can be retained.Such
   as charge-led gpio.
+- retain-state-shutdown: (optional) Retain the state of the LED on shutdown.
+  Useful in BMC systems, for example when the BMC is rebooted while the host
+  remains up.
 - panic-indicator : (optional)
   see Documentation/devicetree/bindings/leds/common.txt
 
-- 
2.11.0