[PATCH linux dev-4.10 v5 3/4] Documentation: hwmon: Document the IBM CFF power supply

[Andrew Jeffery]

On Fri, 2017-08-11 at 12:56 -0500, Eddie James wrote:
> > From: "Edward A. James" <eajames at us.ibm.com>
> 
> > Signed-off-by: Edward A. James <eajames at us.ibm.com>
> ---
>  Documentation/hwmon/ibm-cffps | 54
+++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 54 insertions(+)
>  create mode 100644 Documentation/hwmon/ibm-cffps
> 
> diff --git a/Documentation/hwmon/ibm-cffps b/Documentation/hwmon/ibm-
cffps
> new file mode 100644
> index 0000000..e091ff2
> --- /dev/null
> +++ b/Documentation/hwmon/ibm-cffps
> @@ -0,0 +1,54 @@
> +Kernel driver ibm-cffps
> +=======================
> +
> +Supported chips:
> +  * IBM Common Form Factor power supply
> +
> > +Author: Eddie James <eajames at us.ibm.com>
> +
> +Description
> +-----------
> +
> +This driver supports IBM Common Form Factor (CFF) power supplies.
This driver
> +is a client to the core PMBus driver.
> +
> +Usage Notes
> +-----------
> +
> +This driver does not auto-detect devices. You will have to
instantiate the
> +devices explicitly. Please see Documentation/i2c/instantiating-
devices for
> +details.
> +
> +Sysfs entries
> +-------------
> +
> +The following attributes are supported:
> +
> > +curr1_alarm		Output current over-current fault.
> > +curr1_input		Measured output current in mA.
> > +curr1_label		"iout1"
> +
> > +fan1_alarm		Fan 1 warning.
> > +fan1_fault		Fan 1 fault.
> > +fan1_input		Fan 1 speed in RPM.
> > +fan2_alarm		Fan 2 warning.
> > +fan2_fault		Fan 2 fault.
> > +fan2_input		Fan 2 speed in RPM.
> +
> > +in1_alarm		Input voltage under-voltage fault.
> > +in1_input		Measured input voltage in mV.
> > +in1_label		"vin"
> > +in2_alarm		Output voltage over-voltage fault.
> > +in2_input		Measured output voltage in mV.
> > +in2_label		"vout1"
> +
> > +power1_alarm		Input fault.
> > +power1_input		Measured input power in uW.
> > +power1_label		"pin"
> +
> > +temp1_alarm		PSU inlet ambient temperature over-
temperature fault.
> > +temp1_input		Measured PSU inlet ambient temp in
millidegrees C.
> > +temp2_alarm		Secondary rectifier temp over-
temperature fault.
> > +temp2_input		Measured secondary rectifier temp in
millidegrees C.
> > +temp3_alarm		ORing FET temperature over-temperature
fault.
> > +temp3_input		Measured ORing FET temperature in
millidegrees C.

Reviewed-by: Andrew Jeffery <andrew at aj.id.au>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: This is a digitally signed message part
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20170814/eebbea34/attachment.sig>