[RFC v1 1/4] ipmi_bmc: framework for BT IPMI on BMCs
Corey Minyard
minyard at acm.org
Thu Aug 10 23:58:17 AEST 2017
On 08/07/2017 10:52 PM, Brendan Higgins wrote:
> From: Benjamin Fair <benjaminfair at google.com>
>
> This patch introduces a framework for writing IPMI drivers which run on
> a Board Management Controller. It is similar in function to OpenIPMI.
> The framework handles registering devices and routing messages.
Ok, I think I understand this. I have a few nitpicky comments inline.
The RCU usage
looks correct, and the basic design seems sound.
This piece of code takes a communication interface, called a bus, and
muxes/demuxes
messages on that bus to various users, called devices. The name
"devices" confused
me for a bit, because I was thinking they were physical devices, what
Linux would
call a device. I don't have a good suggestion for another name, though.
I assume you would create one of these per bus for handling multiple
busses, which
you will obviously need to do in the future when IPMB comes.
I can see two big problems with the way the "match_request" is done:
* If multiple users want to handle the same request, only one of them
will get it
and they will not know they have conflicted.
* Doing this for userland interfaces will be hard.
The other way to do this is for each user to register for each request
type and
manage it all in this code, which is kind of messy to use, but avoids the
above problems.
In thinking about the bigger picture here, you will need something like
this for every
communication interface the BMC supports: the system interface, LAN,
IPMB, ICMB
(let's hope not), and serial/modem interfaces (let's hope not, too, but
people really
use these in the field). Maybe ICMB and serial aren't on your radar,
but I'd expect
LAN is pretty important, and you have already mentioned IPMB.
If you are thinking you will have a separate one of these for LAN in
userspace, I
would say just do it all in userspace. For LAN you will have something
that has
to mux/demux all the messages from the LAN interface to the various
users, the
same code could sit on top of the current BT interface (and IPMB, etc.).
I guess I'm trying to figure out how you expect all this work out in the
end. What
you have now is a message mux/demux that can only have on thing underneath
it and one thing above it, which obviously isn't very useful. Are you
thinking you
can have other in-kernel things that can handle specific messages? I'm
having
a hard time imagining that's the case. Or are you thinking that you
will create
a userland interface to create a bus and then when a LAN connection comes
in you create one of these BMC contexts and route the LAN traffic
through this
code? That's kind of clever, but I'm wondering if there would be better
ways
to do this than this design.
-corey
> Signed-off-by: Benjamin Fair <benjaminfair at google.com>
> Signed-off-by: Brendan Higgins <brendanhiggins at google.com>
> ---
> drivers/char/ipmi_bmc/Makefile | 1 +
> drivers/char/ipmi_bmc/ipmi_bmc.c | 294 +++++++++++++++++++++++++++++++++++++++
> include/linux/ipmi_bmc.h | 184 ++++++++++++++++++++++++
> 3 files changed, 479 insertions(+)
> create mode 100644 drivers/char/ipmi_bmc/ipmi_bmc.c
>
> diff --git a/drivers/char/ipmi_bmc/Makefile b/drivers/char/ipmi_bmc/Makefile
> index 8bff32b55c24..9c7cd48d899f 100644
> --- a/drivers/char/ipmi_bmc/Makefile
> +++ b/drivers/char/ipmi_bmc/Makefile
> @@ -2,5 +2,6 @@
> # Makefile for the ipmi bmc drivers.
> #
>
> +obj-$(CONFIG_IPMI_BMC) += ipmi_bmc.o
> obj-$(CONFIG_IPMI_BMC_BT_I2C) += ipmi_bmc_bt_i2c.o
> obj-$(CONFIG_ASPEED_BT_IPMI_BMC) += ipmi_bmc_bt_aspeed.o
> diff --git a/drivers/char/ipmi_bmc/ipmi_bmc.c b/drivers/char/ipmi_bmc/ipmi_bmc.c
> new file mode 100644
> index 000000000000..c1324ac9a83c
> --- /dev/null
> +++ b/drivers/char/ipmi_bmc/ipmi_bmc.c
This is not really a BMC, it's a BMC message router, or something like that.
> @@ -0,0 +1,294 @@
> +/*
> + * Copyright 2017 Google Inc.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/errno.h>
> +#include <linux/export.h>
> +#include <linux/init.h>
> +#include <linux/ipmi_bmc.h>
> +#include <linux/list.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/rculist.h>
> +#include <linux/rcupdate.h>
> +
> +#define PFX "IPMI BMC core: "
> +
> +struct ipmi_bmc_ctx *ipmi_bmc_get_global_ctx()
> +{
> + static struct ipmi_bmc_ctx global_ctx;
> +
> + return &global_ctx;
> +}
> +
> +int ipmi_bmc_send_response(struct ipmi_bmc_ctx *ctx,
> + struct bt_msg *bt_response)
> +{
> + struct ipmi_bmc_bus *bus;
> + int ret = -ENODEV;
> +
> + rcu_read_lock();
> + bus = rcu_dereference(ctx->bus);
> +
> + if (bus)
> + ret = bus->send_response(bus, bt_response);
> +
> + rcu_read_unlock();
> + return ret;
> +}
> +EXPORT_SYMBOL(ipmi_bmc_send_response);
> +
> +bool ipmi_bmc_is_response_open(struct ipmi_bmc_ctx *ctx)
> +{
> + struct ipmi_bmc_bus *bus;
> + bool ret = false;
> +
> + rcu_read_lock();
> + bus = rcu_dereference(ctx->bus);
> +
> + if (bus)
> + ret = bus->is_response_open(bus);
> +
> + rcu_read_unlock();
> + return ret;
> +}
> +EXPORT_SYMBOL(ipmi_bmc_is_response_open);
> +
> +int ipmi_bmc_register_device(struct ipmi_bmc_ctx *ctx,
> + struct ipmi_bmc_device *device_in)
> +{
> + struct ipmi_bmc_device *device;
> +
> + mutex_lock(&ctx->drivers_mutex);
> + /* Make sure it hasn't already been registered. */
> + list_for_each_entry(device, &ctx->devices, link) {
> + if (device == device_in) {
> + mutex_unlock(&ctx->drivers_mutex);
> + return -EINVAL;
> + }
> + }
> +
> + list_add_rcu(&device_in->link, &ctx->devices);
> + mutex_unlock(&ctx->drivers_mutex);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(ipmi_bmc_register_device);
> +
> +int ipmi_bmc_unregister_device(struct ipmi_bmc_ctx *ctx,
> + struct ipmi_bmc_device *device_in)
> +{
> + struct ipmi_bmc_device *device;
> + bool found = false;
> +
> + mutex_lock(&ctx->drivers_mutex);
> + /* Make sure it is currently registered. */
> + list_for_each_entry(device, &ctx->devices, link) {
> + if (device == device_in) {
> + found = true;
> + break;
> + }
> + }
> + if (!found) {
> + mutex_unlock(&ctx->drivers_mutex);
> + return -ENXIO;
> + }
> +
> + list_del_rcu(&device_in->link);
> + mutex_unlock(&ctx->drivers_mutex);
> + synchronize_rcu();
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(ipmi_bmc_unregister_device);
> +
> +int ipmi_bmc_register_default_device(struct ipmi_bmc_ctx *ctx,
> + struct ipmi_bmc_device *device)
> +{
> + int ret;
> +
> + mutex_lock(&ctx->drivers_mutex);
> + if (!ctx->default_device) {
> + ctx->default_device = device;
> + ret = 0;
> + } else {
> + ret = -EBUSY;
> + }
> + mutex_unlock(&ctx->drivers_mutex);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL(ipmi_bmc_register_default_device);
> +
> +int ipmi_bmc_unregister_default_device(struct ipmi_bmc_ctx *ctx,
> + struct ipmi_bmc_device *device)
> +{
> + int ret;
> +
> + mutex_lock(&ctx->drivers_mutex);
> + if (ctx->default_device == device) {
> + ctx->default_device = NULL;
> + ret = 0;
> + } else {
> + ret = -ENXIO;
> + }
> + mutex_unlock(&ctx->drivers_mutex);
> + synchronize_rcu();
> +
> + return ret;
> +}
> +EXPORT_SYMBOL(ipmi_bmc_unregister_default_device);
> +
> +static u8 errno_to_ccode(int errno)
> +{
> + switch (errno) {
> + case EBUSY:
> + return 0xC0; /* Node Busy */
> + case EINVAL:
> + return 0xC1; /* Invalid Command */
> + case ETIMEDOUT:
> + return 0xC3; /* Timeout while processing command */
> + case ENOMEM:
> + return 0xC4; /* Out of space */
> + default:
> + return 0xFF; /* Unspecified error */
Instead of the hard-coded constants, you can use
include/uapi/linux/ipmi_msgdefs.h
and add things there as needed. You probably knew that, but these
numbers should
all be the same. Same for other constant that might apply.
> + }
> +}
> +
> +static void ipmi_bmc_send_error_response(struct ipmi_bmc_ctx *ctx,
> + struct bt_msg *bt_request,
> + u8 ccode)
> +{
> + struct bt_msg error_response;
> + int ret;
> +
> + /* Payload contains 1 byte for completion code */
> + error_response.len = bt_msg_payload_to_len(1);
> + error_response.netfn_lun = bt_request->netfn_lun |
> + IPMI_NETFN_LUN_RESPONSE_MASK;
> + error_response.seq = bt_request->seq;
> + error_response.cmd = bt_request->cmd;
> + error_response.payload[0] = ccode;
> +
> + /*
> + * TODO(benjaminfair): Retry sending the response if it fails. The error
> + * response might fail to send if another response is in progress. In
> + * that case, the request will timeout rather than getting a more
> + * specific completion code. This should buffer up responses and send
> + * them when it can. Device drivers will generally handle error
> + * reporting themselves; this code is only a fallback when that's not
> + * available or when the drivers themselves fail.
> + */
> + ret = ipmi_bmc_send_response(ctx, &error_response);
> + if (ret)
> + pr_warn(PFX "Failed to reply with completion code %u: ipmi_bmc_send_response returned %d\n",
> + (u32) ccode, ret);
> +}
> +
> +void ipmi_bmc_handle_request(struct ipmi_bmc_ctx *ctx,
> + struct bt_msg *bt_request)
> +{
> + struct ipmi_bmc_device *default_device;
> + struct ipmi_bmc_device *device;
> + int ret = -EINVAL;
> +
> + rcu_read_lock();
> + list_for_each_entry_rcu(device, &ctx->devices, link) {
> + if (device->match_request(device, bt_request)) {
> + ret = device->handle_request(device, bt_request);
> + goto out;
> + }
> + }
> +
> + /* No specific handler found. Use default handler instead */
> + default_device = rcu_dereference(ctx->default_device);
> + if (default_device)
> + ret = default_device->handle_request(default_device,
> + bt_request);
> +
> +out:
> + rcu_read_unlock();
> + if (ret)
> + ipmi_bmc_send_error_response(ctx, bt_request,
> + errno_to_ccode(-ret));
> +}
> +EXPORT_SYMBOL(ipmi_bmc_handle_request);
> +
> +void ipmi_bmc_signal_response_open(struct ipmi_bmc_ctx *ctx)
> +{
> + struct ipmi_bmc_device *default_device;
> + struct ipmi_bmc_device *device;
> +
> + rcu_read_lock();
> + list_for_each_entry_rcu(device, &ctx->devices, link) {
> + device->signal_response_open(device);
> + }
> +
> + default_device = rcu_dereference(ctx->default_device);
> + if (default_device)
> + default_device->signal_response_open(default_device);
> +
> + rcu_read_unlock();
> +}
> +EXPORT_SYMBOL(ipmi_bmc_signal_response_open);
> +
> +int ipmi_bmc_register_bus(struct ipmi_bmc_ctx *ctx,
> + struct ipmi_bmc_bus *bus_in)
> +{
> + int ret;
> +
> + mutex_lock(&ctx->drivers_mutex);
> + if (!ctx->bus) {
> + ctx->bus = bus_in;
> + ret = 0;
> + } else {
> + ret = -EBUSY;
> + }
> + mutex_unlock(&ctx->drivers_mutex);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL(ipmi_bmc_register_bus);
> +
> +int ipmi_bmc_unregister_bus(struct ipmi_bmc_ctx *ctx,
> + struct ipmi_bmc_bus *bus_in)
> +{
> + int ret;
> +
> + mutex_lock(&ctx->drivers_mutex);
> + /* Tried to unregister when another bus is registered */
> + if (ctx->bus == bus_in) {
> + ctx->bus = NULL;
> + ret = 0;
> + } else {
> + ret = -ENXIO;
> + }
> + mutex_unlock(&ctx->drivers_mutex);
> + synchronize_rcu();
> +
> + return ret;
> +}
> +EXPORT_SYMBOL(ipmi_bmc_unregister_bus);
> +
> +static int __init ipmi_bmc_init(void)
> +{
> + struct ipmi_bmc_ctx *ctx = ipmi_bmc_get_global_ctx();
> +
> + mutex_init(&ctx->drivers_mutex);
> + INIT_LIST_HEAD(&ctx->devices);
> + return 0;
> +}
> +module_init(ipmi_bmc_init);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Benjamin Fair <benjaminfair at google.com>");
> +MODULE_DESCRIPTION("Core IPMI driver for the BMC side");
> diff --git a/include/linux/ipmi_bmc.h b/include/linux/ipmi_bmc.h
> index d0885c0bf190..2b494a79ec14 100644
> --- a/include/linux/ipmi_bmc.h
> +++ b/include/linux/ipmi_bmc.h
> @@ -20,6 +20,13 @@
> #include <linux/types.h>
>
> #define BT_MSG_PAYLOAD_LEN_MAX 252
> +#define BT_MSG_SEQ_MAX 255
> +
> +/*
> + * The bit in this mask is set in the netfn_lun field of an IPMI message to
> + * indicate that it is a response.
> + */
> +#define IPMI_NETFN_LUN_RESPONSE_MASK (1 << 2)
>
> /**
> * struct bt_msg - Block Transfer IPMI message.
> @@ -42,6 +49,84 @@ struct bt_msg {
> u8 payload[BT_MSG_PAYLOAD_LEN_MAX];
> } __packed;
>
> +/**
> + * struct ipmi_bmc_device - Device driver that wants to receive ipmi requests.
> + * @link: Used to make a linked list of devices.
> + * @match_request: Used to determine whether a request can be handled by this
> + * device. Note that the matchers are checked in an arbitrary
> + * order.
> + * @handle_request: Called when a request is received for this device.
> + * @signal_response_open: Called when a response is done being sent and another
> + * device can send a message. Make sure to check that the
> + * bus isn't busy even after this is called, because all
> + * devices receive this call and another one may have
> + * already submitted a new response.
> + *
> + * This collection of callback functions represents an upper-level handler of
> + * IPMI requests.
> + *
> + * Note that the callbacks may be called from an interrupt context.
> + */
> +struct ipmi_bmc_device {
> + struct list_head link;
> +
> + bool (*match_request)(struct ipmi_bmc_device *device,
> + struct bt_msg *bt_request);
> + int (*handle_request)(struct ipmi_bmc_device *device,
> + struct bt_msg *bt_request);
> + void (*signal_response_open)(struct ipmi_bmc_device *device);
> +};
> +
> +/**
> + * struct ipmi_bmc_bus - Bus driver that exchanges messages with the host.
> + * @send_response: Submits the given response to be sent to the host. May return
> + * -EBUSY if a response is already in progress, in which case
> + * the caller should wait for the response_open() callback to be
> + * called.
> + * @is_response_open: Determines whether a response can currently be sent. Note
> + * that &ipmi_bmc_bus->send_response() may still fail with
> + * -EBUSY even after this returns true.
> + *
> + * This collection of callback functions represents a lower-level driver which
> + * acts as a connection to the host.
> + */
> +struct ipmi_bmc_bus {
> + int (*send_response)(struct ipmi_bmc_bus *bus,
> + struct bt_msg *bt_response);
> + bool (*is_response_open)(struct ipmi_bmc_bus *bus);
> +};
> +
> +/**
> + * struct ipmi_bmc_ctx - Context object used to interact with the IPMI BMC
> + * core driver.
> + * @bus: Pointer to the bus which is currently registered, or NULL for none.
> + * @default_device: Pointer to a device which will receive messages that match
> + * no other devices, or NULL if none is registered.
> + * @devices: List of devices which are currently registered, besides the default
> + * device.
> + * @drivers_mutex: Mutex which protects against concurrent editing of the
> + * bus driver, default device driver, and devices list.
> + *
> + * This struct should only be modified by the IPMI BMC core code and not by bus
> + * or device drivers.
> + */
> +struct ipmi_bmc_ctx {
> + struct ipmi_bmc_bus __rcu *bus;
> + struct ipmi_bmc_device __rcu *default_device;
> + struct list_head devices;
> + struct mutex drivers_mutex;
Since it does all it does, "drivers_mutex" IMHO is too specific a name.
> +};
> +
> +/**
> + * ipmi_bmc_get_global_ctx() - Get a pointer to the global ctx.
> + *
> + * This function gets a reference to the global ctx object which is used by
> + * bus and device drivers to interact with the IPMI BMC core driver.
> + *
> + * Return: Pointer to the global ctx object.
> + */
> +struct ipmi_bmc_ctx *ipmi_bmc_get_global_ctx(void);
> +
> /**
> * bt_msg_len() - Determine the total length of a Block Transfer message.
> * @bt_msg: Pointer to the message.
> @@ -73,4 +158,103 @@ static inline u8 bt_msg_payload_to_len(u8 payload_len)
> return payload_len + 3;
> }
>
> +/**
> + * ipmi_bmc_send_response() - Send an IPMI response on the current bus.
> + * @bt_response: The response message to send.
> + *
> + * Return: 0 on success, negative errno otherwise.
> + */
> +int ipmi_bmc_send_response(struct ipmi_bmc_ctx *ctx,
> + struct bt_msg *bt_response);
> +/**
> + * ipmi_bmc_is_response_open() - Check whether we can currently send a new
> + * response.
> + *
> + * Note that even if this function returns true, ipmi_bmc_send_response() may
> + * still fail with -EBUSY if a response is submitted in the time between the two
> + * calls.
> + *
> + * Return: true if we can send a new response, false if one is already in
> + * progress.
> + */
> +bool ipmi_bmc_is_response_open(struct ipmi_bmc_ctx *ctx);
> +/**
> + * ipmi_bmc_register_device() - Register a new device driver.
> + * @device: Pointer to the struct which represents this device,
> + *
> + * Return: 0 on success, negative errno otherwise.
> + */
> +int ipmi_bmc_register_device(struct ipmi_bmc_ctx *ctx,
> + struct ipmi_bmc_device *device);
> +/**
> + * ipmi_bmc_unregister_device() - Unregister an existing device driver.
> + * @device: Pointer to the struct which represents the existing device.
> + *
> + * Return: 0 on success, negative errno otherwise.
> + */
> +int ipmi_bmc_unregister_device(struct ipmi_bmc_ctx *ctx,
> + struct ipmi_bmc_device *device);
> +/**
> + * ipmi_bmc_register_default_device() - Register a new default device driver.
> + * @device: Pointer to the struct which represents this device,
> + *
> + * Make this device the default device. If none of the other devices match on a
> + * particular message, this device will receive it instead. Note that only one
> + * default device may be registered at a time.
> + *
> + * This functionalisty is currently used to allow messages which aren't directly
> + * handled by the kernel to be sent to userspace and handled there.
> + *
> + * Return: 0 on success, negative errno otherwise.
> + */
> +int ipmi_bmc_register_default_device(struct ipmi_bmc_ctx *ctx,
> + struct ipmi_bmc_device *device);
> +/**
> + * ipmi_bmc_unregister_default_device() - Unregister the existing default device
> + * driver.
> + * @device: Pointer to the struct which represents the existing device.
> + *
> + * Return: 0 on success, negative errno otherwise.
> + */
> +int ipmi_bmc_unregister_default_device(struct ipmi_bmc_ctx *ctx,
> + struct ipmi_bmc_device *device);
> +/**
> + * ipmi_bmc_handle_request() - Handle a new request that was received.
> + * @bt_request: The request that was received.
> + *
> + * This is called by the bus driver when it receives a new request message.
> + *
> + * Note that it may be called from an interrupt context.
> + */
> +void ipmi_bmc_handle_request(struct ipmi_bmc_ctx *ctx,
> + struct bt_msg *bt_request);
> +/**
> + * ipmi_bmc_signal_response_open() - Notify the upper layer that a response can
> + * be sent.
> + *
> + * This is called by the bus driver after it finishes sending a response and is
> + * ready to begin sending another one.
> + */
> +void ipmi_bmc_signal_response_open(struct ipmi_bmc_ctx *ctx);
> +/**
> + * ipmi_bmc_register_bus() - Register a new bus driver.
> + * @bus: Pointer to the struct which represents this bus.
> + *
> + * Register a bus driver to handle communication with the host.
> + *
> + * Only one bus driver can be registered at any time.
> + *
> + * Return: 0 on success, negative errno otherwise.
> + */
> +int ipmi_bmc_register_bus(struct ipmi_bmc_ctx *ctx,
> + struct ipmi_bmc_bus *bus);
> +/**
> + * ipmi_bmc_unregister_bus() - Unregister an existing bus driver.
> + * @bus: Pointer to the struct which represents the existing bus.
> + *
> + * Return: 0 on success, negative errno otherwise.
> + */
> +int ipmi_bmc_unregister_bus(struct ipmi_bmc_ctx *ctx,
> + struct ipmi_bmc_bus *bus);
> +
> #endif /* __LINUX_IPMI_BMC_H */
More information about the openbmc
mailing list