[PATCH linux dev-4.10 v2 1/3] dt-bindings: fsi: Add optional property no-scan-on-init

[Christopher Bostic]

Add an optional FSI master property 'no-scan-on-init.  This
can be specified to indicate that a master should not be
automatically scanned at init time.  This is required in cases
where a scan could interfere with another FSI master on the same
bus.

Signed-off-by: Christopher Bostic <cbostic at linux.vnet.ibm.com>
---
 Documentation/devicetree/bindings/fsi/fsi.txt | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/fsi/fsi.txt b/Documentation/devicetree/bindings/fsi/fsi.txt
index 4eaf488..ab516c6 100644
--- a/Documentation/devicetree/bindings/fsi/fsi.txt
+++ b/Documentation/devicetree/bindings/fsi/fsi.txt
@@ -56,6 +56,13 @@ addresses (link index and slave ID), and no size:
     #address-cells = <2>;
     #size-cells = <0>;
 
+An optional boolean property can be added to indicate that a particular master
+should not scan for connected devices at initialization time.  This is
+necessary in cases where a scan could cause arbitration issues with other
+masters that may be present on the bus.
+
+    no-scan-on-init;
+
 FSI slaves
 ----------
 
-- 
1.8.2.2