[PATCH linux dev-4.10 07/10] aspeed: zaius: Remove manual CS decoding window configuration

[Xo Wang]

On Wed, Apr 26, 2017 at 11:57 PM, Cédric Le Goater <clg at kaod.org> wrote:
> On 04/27/2017 08:08 AM, Andrew Jeffery wrote:
>> This is now handled by the SMC driver.
>>
>> Signed-off-by: Andrew Jeffery <andrew at aj.id.au>
>
> Reviewed-by: Cédric Le Goater <clg at kaod.org>
>
> Thanks,
>
> C.
>
>> ---
>>  arch/arm/mach-aspeed/aspeed.c | 6 ------
>>  1 file changed, 6 deletions(-)
>>
>> diff --git a/arch/arm/mach-aspeed/aspeed.c b/arch/arm/mach-aspeed/aspeed.c
>> index e879e9e1aa42..ded756b4fae5 100644
>> --- a/arch/arm/mach-aspeed/aspeed.c
>> +++ b/arch/arm/mach-aspeed/aspeed.c
>> @@ -136,12 +136,6 @@ static void __init do_zaius_setup(void)
>>       reg = readl(AST_IO(AST_BASE_GPIO | 0x00));
>>       writel(reg | phy_reset_mask, AST_IO(AST_BASE_GPIO | 0x00));
>>
>> -     /* Set SPI1 CE1 decoding window to 0x34000000 */
>> -     writel(0x70680000, AST_IO(AST_BASE_SPI | 0x34));
>> -
>> -     /* Set SPI1 CE0 decoding window to 0x30000000 */
>> -     writel(0x68600000, AST_IO(AST_BASE_SPI | 0x30));
>> -
>>       /* Disable default behavior of UART1 being held in reset by LPCRST#.
>>        * By releasing UART1 from being controlled by LPC reset, it becomes
>>        * immediately available regardless of the host being up.
>>
>

Reviewed-by: Xo Wang <xow at google.com>