[PATCH linux dev-4.10 06/10] aspeed: zaius: Remove LPC-to-AHB bridge configuration

[Andrew Jeffery]

This is handled by the mbox daemon via the lpc-ctrl driver.

Signed-off-by: Andrew Jeffery <andrew at aj.id.au>
---
 arch/arm/mach-aspeed/aspeed.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/arch/arm/mach-aspeed/aspeed.c b/arch/arm/mach-aspeed/aspeed.c
index f73a72676437..e879e9e1aa42 100644
--- a/arch/arm/mach-aspeed/aspeed.c
+++ b/arch/arm/mach-aspeed/aspeed.c
@@ -136,18 +136,6 @@ static void __init do_zaius_setup(void)
 	reg = readl(AST_IO(AST_BASE_GPIO | 0x00));
 	writel(reg | phy_reset_mask, AST_IO(AST_BASE_GPIO | 0x00));
 
-	/* Setup PNOR address mapping for 64M flash
-	 *
-	 *   ADRBASE: 0x3000 (0x30000000)
-	 *   HWMBASE: 0x0C00 (0x0C000000)
-	 *  ADDRMASK: 0xFC00 (0xFC000000)
-	 *   HWNCARE: 0x03FF (0x03FF0000)
-	 *
-	 * Mapping appears at 0x60300fc000000 on the host
-	 */
-	writel(0x30000C00, AST_IO(AST_BASE_LPC | 0x88));
-	writel(0xFC0003FF, AST_IO(AST_BASE_LPC | 0x8C));
-
 	/* Set SPI1 CE1 decoding window to 0x34000000 */
 	writel(0x70680000, AST_IO(AST_BASE_SPI | 0x34));
 
-- 
2.9.3