[PATCH v2 3/4] gpio: aspeed: Add debounce support
Andrew Jeffery
andrew at aj.id.au
Fri Apr 7 22:59:01 AEST 2017
Each GPIO in the Aspeed GPIO controller can choose one of four input
debounce states: to disable debouncing for an input, or select from one
of three programmable debounce timer values. Each GPIO in a
four-bank-set is assigned one bit in each of two debounce configuration
registers dedicated to the set, and selects a debounce state by
configuring the two bits to select one of the four options.
The limitation on debounce timer values is managed by mapping offsets
onto a configured timer value and keeping count of the number of users
a timer has. Timer values are configured on a first-come-first-served
basis.
A small twist in the hardware design is that the debounce configuration
register numbering is reversed with respect to the binary representation
of the debounce timer of interest (i.e. debounce register 1 represents
bit 1, and debounce register 2 represents bit 0 of the timer numbering).
Tested on an AST2500EVB with additional inspection under QEMU's
romulus-bmc machine.
Signed-off-by: Andrew Jeffery <andrew at aj.id.au>
---
drivers/gpio/gpio-aspeed.c | 281 ++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 276 insertions(+), 5 deletions(-)
diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
index fb16cc771c0d..3327a48df862 100644
--- a/drivers/gpio/gpio-aspeed.c
+++ b/drivers/gpio/gpio-aspeed.c
@@ -9,14 +9,18 @@
* 2 of the License, or (at your option) any later version.
*/
-#include <linux/module.h>
-#include <linux/kernel.h>
+#include <asm/div64.h>
+#include <linux/clk.h>
+#include <linux/gpio/driver.h>
+#include <linux/hashtable.h>
#include <linux/init.h>
#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <linux/platform_device.h>
-#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
struct aspeed_bank_props {
unsigned int bank;
@@ -29,59 +33,85 @@ struct aspeed_gpio_config {
const struct aspeed_bank_props *props;
};
+/*
+ * @offset_timer: Maps an offset to an @timer_users index, or zero if disabled
+ * @timer_users: Tracks the number of users for each timer
+ *
+ * The @timer_users has four elements but the first element is unused. This is
+ * to simplify accounting and indexing, as a zero value in @offset_timer
+ * represents disabled debouncing for the GPIO. Any other value for an element
+ * of @offset_timer is used as an index into @timer_users. This behaviour of
+ * the zero value aligns with the behaviour of zero built from the timer
+ * configuration registers (i.e. debouncing is disabled).
+ */
struct aspeed_gpio {
struct gpio_chip chip;
spinlock_t lock;
void __iomem *base;
int irq;
const struct aspeed_gpio_config *config;
+
+ u8 *offset_timer;
+ unsigned int timer_users[4];
+ struct clk *clk;
};
struct aspeed_gpio_bank {
uint16_t val_regs;
uint16_t irq_regs;
+ uint16_t debounce_regs;
const char names[4][3];
};
+static const int debounce_timers[4] = { 0x00, 0x50, 0x54, 0x58 };
+
static const struct aspeed_gpio_bank aspeed_gpio_banks[] = {
{
.val_regs = 0x0000,
.irq_regs = 0x0008,
+ .debounce_regs = 0x0040,
.names = { "A", "B", "C", "D" },
},
{
.val_regs = 0x0020,
.irq_regs = 0x0028,
+ .debounce_regs = 0x0048,
.names = { "E", "F", "G", "H" },
},
{
.val_regs = 0x0070,
.irq_regs = 0x0098,
+ .debounce_regs = 0x00b0,
.names = { "I", "J", "K", "L" },
},
{
.val_regs = 0x0078,
.irq_regs = 0x00e8,
+ .debounce_regs = 0x0100,
.names = { "M", "N", "O", "P" },
},
{
.val_regs = 0x0080,
.irq_regs = 0x0118,
+ .debounce_regs = 0x0130,
.names = { "Q", "R", "S", "T" },
},
{
.val_regs = 0x0088,
.irq_regs = 0x0148,
+ .debounce_regs = 0x0160,
.names = { "U", "V", "W", "X" },
},
{
.val_regs = 0x01E0,
.irq_regs = 0x0178,
+ .debounce_regs = 0x0190,
.names = { "Y", "Z", "AA", "AB" },
},
{
.val_regs = 0x01E8,
.irq_regs = 0x01A8,
+ .debounce_regs = 0x01c0,
.names = { "AC", "", "", "" },
},
};
@@ -99,6 +129,13 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = {
#define GPIO_IRQ_TYPE2 0x0c
#define GPIO_IRQ_STATUS 0x10
+#define GPIO_DEBOUNCE_SEL1 0x00
+#define GPIO_DEBOUNCE_SEL2 0x04
+
+#define _GPIO_SET_DEBOUNCE(t, o, i) ((!!((t) & BIT(i))) << GPIO_OFFSET(o))
+#define GPIO_SET_DEBOUNCE1(t, o) _GPIO_SET_DEBOUNCE(t, o, 1)
+#define GPIO_SET_DEBOUNCE2(t, o) _GPIO_SET_DEBOUNCE(t, o, 0)
+
static const struct aspeed_gpio_bank *to_bank(unsigned int offset)
{
unsigned int bank = GPIO_BANK(offset);
@@ -144,6 +181,7 @@ static inline bool have_input(struct aspeed_gpio *gpio, unsigned int offset)
}
#define have_irq(g, o) have_input((g), (o))
+#define have_debounce(g, o) have_input((g), (o))
static inline bool have_output(struct aspeed_gpio *gpio, unsigned int offset)
{
@@ -506,6 +544,227 @@ static void aspeed_gpio_free(struct gpio_chip *chip, unsigned int offset)
pinctrl_free_gpio(chip->base + offset);
}
+static inline void __iomem *bank_debounce_reg(struct aspeed_gpio *gpio,
+ const struct aspeed_gpio_bank *bank,
+ unsigned int reg)
+{
+ return gpio->base + bank->debounce_regs + reg;
+}
+
+static int usecs_to_cycles(struct aspeed_gpio *gpio, unsigned long usecs,
+ u32 *cycles)
+{
+ u64 rate;
+ u64 n;
+ u32 r;
+
+ rate = clk_get_rate(gpio->clk);
+ if (!rate)
+ return -ENOTSUPP;
+
+ n = rate * usecs;
+ r = do_div(n, 1000000);
+
+ if (n >= U32_MAX)
+ return -ERANGE;
+
+ /* At least as long as the requested time */
+ *cycles = n + (!!r);
+
+ return 0;
+}
+
+/* Call under gpio->lock */
+static int register_allocated_timer(struct aspeed_gpio *gpio,
+ unsigned int offset, unsigned int timer)
+{
+ if (WARN(gpio->offset_timer[offset] != 0,
+ "Offset %d already allocated timer %d\n",
+ offset, gpio->offset_timer[offset]))
+ return -EINVAL;
+
+ if (WARN(gpio->timer_users[timer] == UINT_MAX,
+ "Timer user count would overflow\n"))
+ return -EPERM;
+
+ gpio->offset_timer[offset] = timer;
+ gpio->timer_users[timer]++;
+
+ return 0;
+}
+
+/* Call under gpio->lock */
+static int unregister_allocated_timer(struct aspeed_gpio *gpio,
+ unsigned int offset)
+{
+ if (WARN(gpio->offset_timer[offset] == 0,
+ "No timer allocated to offset %d\n", offset))
+ return -EINVAL;
+
+ if (WARN(gpio->timer_users[gpio->offset_timer[offset]] == 0,
+ "No users recorded for timer %d\n",
+ gpio->offset_timer[offset]))
+ return -EINVAL;
+
+ gpio->timer_users[gpio->offset_timer[offset]]--;
+ gpio->offset_timer[offset] = 0;
+
+ return 0;
+}
+
+/* Call under gpio->lock */
+static inline bool timer_allocation_registered(struct aspeed_gpio *gpio,
+ unsigned int offset)
+{
+ return gpio->offset_timer[offset] > 0;
+}
+
+/* Call under gpio->lock */
+static void configure_timer(struct aspeed_gpio *gpio, unsigned int offset,
+ unsigned int timer)
+{
+ const struct aspeed_gpio_bank *bank = to_bank(offset);
+ const u32 mask = GPIO_BIT(offset);
+ void __iomem *addr;
+ u32 val;
+
+ addr = bank_debounce_reg(gpio, bank, GPIO_DEBOUNCE_SEL1);
+ val = ioread32(addr);
+ iowrite32((val & ~mask) | GPIO_SET_DEBOUNCE1(timer, offset), addr);
+
+ addr = bank_debounce_reg(gpio, bank, GPIO_DEBOUNCE_SEL2);
+ val = ioread32(addr);
+ iowrite32((val & ~mask) | GPIO_SET_DEBOUNCE2(timer, offset), addr);
+}
+
+static int enable_debounce(struct gpio_chip *chip, unsigned int offset,
+ unsigned long usecs)
+{
+ struct aspeed_gpio *gpio = gpiochip_get_data(chip);
+ u32 requested_cycles;
+ unsigned long flags;
+ int rc;
+ int i;
+
+ rc = usecs_to_cycles(gpio, usecs, &requested_cycles);
+ if (rc < 0) {
+ dev_warn(chip->parent, "Failed to convert %luus to cycles at %luHz: %d\n",
+ usecs, clk_get_rate(gpio->clk), rc);
+ return rc;
+ }
+
+ spin_lock_irqsave(&gpio->lock, flags);
+
+ if (timer_allocation_registered(gpio, offset)) {
+ rc = unregister_allocated_timer(gpio, offset);
+ if (rc < 0)
+ goto out;
+ }
+
+ /* Try to find a timer already configured for the debounce period */
+ for (i = 1; i < ARRAY_SIZE(debounce_timers); i++) {
+ u32 cycles;
+
+ cycles = ioread32(gpio->base + debounce_timers[i]);
+ if (requested_cycles == cycles)
+ break;
+ }
+
+ if (i == ARRAY_SIZE(debounce_timers)) {
+ int j;
+
+ /*
+ * As there are no timers configured for the requested debounce
+ * period, find an unused timer instead
+ */
+ for (j = 1; j < ARRAY_SIZE(gpio->timer_users); j++) {
+ if (gpio->timer_users[j] == 0)
+ break;
+ }
+
+ if (j == ARRAY_SIZE(gpio->timer_users)) {
+ dev_warn(chip->parent,
+ "Debounce timers exhausted, cannot debounce for period %luus\n",
+ usecs);
+
+ rc = -EPERM;
+
+ /*
+ * We already adjusted the accounting to remove @offset
+ * as a user of its previous timer, so also configure
+ * the hardware so @offset has timers disabled for
+ * consistency.
+ */
+ configure_timer(gpio, offset, 0);
+ goto out;
+ }
+
+ i = j;
+
+ iowrite32(requested_cycles, gpio->base + debounce_timers[i]);
+ }
+
+ if (WARN(i == 0, "Cannot register index of disabled timer\n")) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ register_allocated_timer(gpio, offset, i);
+ configure_timer(gpio, offset, i);
+
+out:
+ spin_unlock_irqrestore(&gpio->lock, flags);
+
+ return rc;
+}
+
+static int disable_debounce(struct gpio_chip *chip, unsigned int offset)
+{
+ struct aspeed_gpio *gpio = gpiochip_get_data(chip);
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&gpio->lock, flags);
+
+ rc = unregister_allocated_timer(gpio, offset);
+ if (!rc)
+ configure_timer(gpio, offset, 0);
+
+ spin_unlock_irqrestore(&gpio->lock, flags);
+
+ return rc;
+}
+
+static int set_debounce(struct gpio_chip *chip, unsigned int offset,
+ unsigned long usecs)
+{
+ struct aspeed_gpio *gpio = gpiochip_get_data(chip);
+
+ if (!have_debounce(gpio, offset))
+ return -ENOTSUPP;
+
+ if (usecs)
+ return enable_debounce(chip, offset, usecs);
+
+ return disable_debounce(chip, offset);
+}
+
+static int aspeed_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
+ unsigned long config)
+{
+ unsigned long param = pinconf_to_config_param(config);
+ u32 arg = pinconf_to_config_argument(config);
+
+ if (param == PIN_CONFIG_INPUT_DEBOUNCE)
+ return set_debounce(chip, offset, arg);
+ else if (param == PIN_CONFIG_BIAS_DISABLE ||
+ param == PIN_CONFIG_BIAS_PULL_DOWN ||
+ param == PIN_CONFIG_DRIVE_STRENGTH)
+ return pinctrl_gpio_set_config(offset, config);
+
+ return -ENOTSUPP;
+}
+
/*
* Any banks not specified in a struct aspeed_bank_props array are assumed to
* have the properties:
@@ -565,8 +824,16 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev)
if (!gpio_id)
return -EINVAL;
+ gpio->clk = of_clk_get(pdev->dev.of_node, 0);
+ if (IS_ERR(gpio->clk)) {
+ dev_warn(&pdev->dev,
+ "No HPLL clock phandle provided, debouncing disabled\n");
+ gpio->clk = NULL;
+ }
+
gpio->config = gpio_id->data;
+ gpio->chip.parent = &pdev->dev;
gpio->chip.ngpio = gpio->config->nr_gpios;
gpio->chip.parent = &pdev->dev;
gpio->chip.direction_input = aspeed_gpio_dir_in;
@@ -576,6 +843,7 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev)
gpio->chip.free = aspeed_gpio_free;
gpio->chip.get = aspeed_gpio_get;
gpio->chip.set = aspeed_gpio_set;
+ gpio->chip.set_config = aspeed_gpio_set_config;
gpio->chip.label = dev_name(&pdev->dev);
gpio->chip.base = -1;
gpio->chip.irq_need_valid_mask = true;
@@ -584,6 +852,9 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev)
if (rc < 0)
return rc;
+ gpio->offset_timer =
+ devm_kzalloc(&pdev->dev, gpio->chip.ngpio, GFP_KERNEL);
+
return aspeed_gpio_setup_irqs(gpio, pdev);
}
--
2.9.3
More information about the openbmc
mailing list