[PATCH linux v6 1/2] Documentation: dt-bindings: Document bindings for ASPEED AST2400/AST2500 PWM and Fan tach controller device driver

[Jaghathiswari Rankappagounder Natarajan]

This binding provides interface for adding values related to ASPEED
AST2400/2500 PWM and Fan tach controller support.
The PWM controller can support upto 8 PWM output ports.
The Fan tach controller can support upto 16 tachometer inputs.

Signed-off-by: Jaghathiswari Rankappagounder Natarajan <jaghu at google.com>
---
 v6:
- Changed to aspeed,fan-tach-ch

 v5:
- Changed the naming scheme to aspeed,ast2400/2500-pwm-tacho
- Removed gpio pin muxing
- Added aspeed vendor prefix for fan-tach-ch
- Changed to fan at 0/1
- Changed reg to 32 bits

 v4:
- Used 'reg'

 v3:
- Made the structure more common

 v2:
- Removed '_' in node and property names
- Gave some explanation for the properties used

 .../devicetree/bindings/hwmon/aspeed-pwm-tacho.txt | 68 ++++++++++++++++++++++
 1 file changed, 68 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt

diff --git a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt
new file mode 100644
index 000000000000..ac0a69ab0755
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt
@@ -0,0 +1,68 @@
+ASPEED AST2400/AST2500 PWM and Fan Tacho controller device driver
+
+The ASPEED PWM controller can support upto 8 PWM outputs. The ASPEED Fan Tacho
+controller can support upto 16 Fan tachometer inputs.
+
+There can be upto 8 fans supported. Each fan can have one PWM output and
+one/two Fan tach inputs.
+
+Required properties for pwm-tacho node:
+- #address-cells : should be 1.
+
+- #size-cells : should be 1.
+
+- reg : address and length of the register set for the device.
+
+- pinctrl-names : a pinctrl state named "default" must be defined.
+
+- pinctrl-0 : phandle referencing pin configuration of the PWM ports.
+
+- compatible : should be "aspeed,ast2400-pwm-tacho" for AST2400 and
+	       "aspeed,ast2500-pwm-tacho" for AST2500.
+
+- clocks : a fixed clock providing input clock frequency(PWM
+	   and Fan Tach clock)
+
+fan subnode format:
+===================
+Under fan subnode there can upto 8 child nodes, with each child node
+representing a fan. If there are 8 fans each fan can have one PWM port and
+one/two Fan tach inputs.
+
+Required properties for each child node:
+- reg : should specify PWM source port.
+	integer value in the range 0 to 7 with 0 indicating PWM port A and
+	7 indicating PWM port H.
+
+- aspeed,fan-tach-ch : should specify the Fan tach input channel.
+                integer value in the range 0 through 15, with 0 indicating
+		Fan tach channel 0 and 15 indicating Fan tach channel 15.
+		Atleast one Fan tach input channel is required.
+
+Examples:
+
+pwm_tacho_fixed_clk: fixedclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <24000000>;
+}
+
+pwm_tacho: pwmtachocontroller at 1e786000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg = <0x1E786000 0x1000>;
+	compatible = "aspeed,ast2500-pwm-tacho";
+	clocks = <&pwm_tacho_fixed_clk>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+	fan at 0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan at 1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01 0x02>;
+	};
+};
--
2.12.2.715.g7642488e1d-goog