[PATCH linux v6 18/18] drivers/fsi: Add SCOM FSI client device driver
christopher.lee.bostic at gmail.com
christopher.lee.bostic at gmail.com
Mon Oct 31 09:09:20 AEDT 2016
From: Chris Bostic <cbostic at us.ibm.com>
Create a simple SCOM engine device driver that reads and writes
across an FSI bus.
Signed-off-by: Chris Bostic <cbostic at us.ibm.com>
---
V4 - Add put_scom and get_scom operations
V5 - Add character device registration and fill in read/write
syscalls.
V6 - Add multi scom engine support. Add list of devices.
Use file private data to store and hand off scom structures.
- Add lseek, open, close
- Remove data/address structure to pass from user space to
kernel. Use offset provided by read/write and pass data
- Added list setup in init and so did not add the macro
module_fsi_driver
- Global structs made static where possible.
- Change from char dev to use misc device api as shown
in examples from Jeremy Kere.
---
drivers/fsi/Kconfig | 6 ++
drivers/fsi/Makefile | 1 +
drivers/fsi/fsi-scom.c | 238 +++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 245 insertions(+)
create mode 100644 drivers/fsi/fsi-scom.c
diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig
index b21fe3c..1fa9bc0 100644
--- a/drivers/fsi/Kconfig
+++ b/drivers/fsi/Kconfig
@@ -23,6 +23,12 @@ config FSI_MASTER_GPIO
depends on FSI
---help---
This option enables a FSI master driver using GPIO lines.
+
+config FSI_SCOM
+ tristate "SCOM FSI client"
+ depends on FSI
+ ---help---
+ This option enables the SCOM FSI client device driver.
endif
endmenu
diff --git a/drivers/fsi/Makefile b/drivers/fsi/Makefile
index 2021ce5..3e31d9a 100644
--- a/drivers/fsi/Makefile
+++ b/drivers/fsi/Makefile
@@ -2,3 +2,4 @@
obj-$(CONFIG_FSI) += fsi-core.o
obj-$(CONFIG_FSI_MASTER_FAKE) += fsi-master-fake.o
obj-$(CONFIG_FSI_MASTER_GPIO) += fsi-master-gpio.o
+obj-$(CONFIG_FSI_SCOM) += fsi-scom.o
diff --git a/drivers/fsi/fsi-scom.c b/drivers/fsi/fsi-scom.c
new file mode 100644
index 0000000..27be082
--- /dev/null
+++ b/drivers/fsi/fsi-scom.c
@@ -0,0 +1,238 @@
+/*
+ * SCOM FSI Client device driver
+ *
+ * Copyright (C) IBM Corporation 2016
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERGCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/fsi.h>
+#include <linux/module.h>
+#include <linux/cdev.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/miscdevice.h>
+#include <linux/list.h>
+
+#define FSI_ENGID_SCOM 0x5
+
+#define SCOM_FSI2PIB_DELAY 50
+
+/* SCOM engine register set */
+#define SCOM_DATA0_REG 0x00
+#define SCOM_DATA1_REG 0x04
+#define SCOM_CMD_REG 0x08
+#define SCOM_RESET_REG 0x1C
+
+#define SCOM_RESET_CMD 0x80000000
+#define SCOM_WRITE_CMD 0x80000000
+
+struct scom_device {
+ struct list_head link;
+ struct fsi_device *fsi_dev;
+ struct miscdevice mdev;
+ char name[32];
+};
+
+#define to_scom_dev(x) container_of((x), struct scom_device, mdev)
+
+static struct list_head scom_devices;
+static atomic_t scom_idx = ATOMIC_INIT(0);
+static int scom_probe(struct device *);
+
+static int put_scom(struct scom_device *scom_dev, uint64_t value,
+ uint32_t addr)
+{
+ int rc;
+ uint32_t data = SCOM_RESET_CMD;
+
+ rc = fsi_device_write(scom_dev->fsi_dev, SCOM_RESET_REG, &data,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+
+ data = (value >> 32) & 0xffffffff;
+ rc = fsi_device_write(scom_dev->fsi_dev, SCOM_DATA0_REG, &data,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+
+ data = value & 0xffffffff;
+ rc = fsi_device_write(scom_dev->fsi_dev, SCOM_DATA1_REG, &data,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+
+ data = SCOM_WRITE_CMD | addr;
+ return fsi_device_write(scom_dev->fsi_dev, SCOM_CMD_REG, &data,
+ sizeof(uint32_t));
+}
+
+static int get_scom(struct scom_device *scom_dev, uint64_t *value,
+ uint32_t addr)
+{
+ uint32_t result, data;
+ int rc;
+
+ udelay(SCOM_FSI2PIB_DELAY);
+
+ data = addr;
+ rc = fsi_device_write(scom_dev->fsi_dev, SCOM_CMD_REG, &data,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+
+ rc = fsi_device_read(scom_dev->fsi_dev, SCOM_DATA0_REG, &result,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+
+ *value |= (uint64_t) result << 32;
+ rc = fsi_device_read(scom_dev->fsi_dev, SCOM_DATA1_REG, &result,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+
+ *value |= result;
+
+ return 0;
+}
+
+static loff_t scom_llseek(struct file *filep, loff_t offset, int whence)
+{
+ if (whence != 0) /* SEEK_SET */
+ return -EINVAL;
+
+ filep->f_pos = offset;
+ return offset;
+}
+
+static ssize_t scom_read(struct file *filep, char __user *buf, size_t len,
+ loff_t *offset)
+{
+ int rc = 0;
+ struct miscdevice *mdev =
+ (struct miscdevice *)filep->private_data;
+ struct scom_device *scom = to_scom_dev(mdev);
+ struct device *dev = &scom->fsi_dev->dev;
+ uint64_t val;
+
+ if (len != sizeof(uint64_t))
+ return -EINVAL;
+
+ rc = get_scom(scom, &val, *offset);
+ if (rc) {
+ dev_dbg(dev, "get_scom fail:%d\n", rc);
+ return rc;
+ }
+
+ rc = copy_to_user(buf, &val, len);
+ if (rc)
+ dev_dbg(dev, "copy to user failed:%d\n", rc);
+
+ return rc ? rc : len;
+}
+
+static ssize_t scom_write(struct file *filep, const char __user *buf,
+ size_t len, loff_t *offset)
+{
+ int rc = 0;
+ struct miscdevice *mdev =
+ (struct miscdevice *)filep->private_data;
+ struct scom_device *scom = to_scom_dev(mdev);
+ struct device *dev = &scom->fsi_dev->dev;
+ uint64_t val;
+
+ if (len != sizeof(uint64_t))
+ return -EINVAL;
+
+ rc = copy_from_user(&val, buf, len);
+ if (rc) {
+ dev_dbg(dev, "copy from user failed:%d\n", rc);
+ return -EINVAL;
+ }
+
+ rc = put_scom(scom, val, *offset);
+ if (rc)
+ dev_dbg(dev, "put_scom failed with:%d\n", rc);
+
+
+ return rc ? rc : len;
+}
+
+static const struct file_operations scom_fops = {
+ .owner = THIS_MODULE,
+ .llseek = scom_llseek,
+ .read = scom_read,
+ .write = scom_write,
+};
+
+static int scom_probe(struct device *dev)
+{
+ struct fsi_device *fsi_dev = to_fsi_dev(dev);
+ struct scom_device *scom = NULL;
+
+ scom = devm_kzalloc(dev, sizeof(*scom), GFP_KERNEL);
+ if (!scom)
+ return -ENOMEM;
+
+ snprintf(scom->name, sizeof(scom->name),
+ "scom%d", atomic_inc_return(&scom_idx));
+ scom->fsi_dev = fsi_dev;
+ scom->mdev.minor = MISC_DYNAMIC_MINOR;
+ scom->mdev.fops = &scom_fops;
+ scom->mdev.name = scom->name;
+ scom->mdev.parent = dev;
+ list_add(&scom->link, &scom_devices);
+
+ return misc_register(&scom->mdev);
+}
+
+static struct fsi_device_id scom_ids[] = {
+ {
+ .engine_type = FSI_ENGID_SCOM,
+ .version = FSI_VERSION_ANY,
+ },
+ { 0 }
+};
+
+static struct fsi_driver scom_drv = {
+ .id_table = scom_ids,
+ .drv = {
+ .name = "scom",
+ .bus = &fsi_bus_type,
+ .probe = scom_probe,
+ }
+};
+
+static int scom_init(void)
+{
+ INIT_LIST_HEAD(&scom_devices);
+ return fsi_driver_register(&scom_drv);
+}
+
+static void scom_exit(void)
+{
+ struct list_head *pos;
+ struct scom_device *scom = NULL;
+
+ list_for_each(pos, &scom_devices) {
+ scom = list_entry(pos, struct scom_device, link);
+ misc_deregister(&scom->mdev);
+ devm_kfree(&scom->fsi_dev->dev, scom);
+ }
+ fsi_driver_unregister(&scom_drv);
+}
+
+module_init(scom_init);
+module_exit(scom_exit);
+MODULE_LICENSE("GPL");
--
1.8.2.2
More information about the openbmc
mailing list