[RFC PATCH linux v6 9/9] wip: hwmon: occ: Add sketch of the hwmon implementation for the P9 OCC
eajames.ibm at gmail.com
eajames.ibm at gmail.com
Wed Nov 30 10:04:42 AEDT 2016
From: "Edward A. James" <eajames at us.ibm.com>
Signed-off-by: Edward A. James <eajames at us.ibm.com>
---
drivers/hwmon/occ/Kconfig | 9 ++++
drivers/hwmon/occ/Makefile | 1 +
drivers/hwmon/occ/occ_p9_fsi.c | 93 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 103 insertions(+)
create mode 100644 drivers/hwmon/occ/occ_p9_fsi.c
diff --git a/drivers/hwmon/occ/Kconfig b/drivers/hwmon/occ/Kconfig
index e690001..7e95876 100644
--- a/drivers/hwmon/occ/Kconfig
+++ b/drivers/hwmon/occ/Kconfig
@@ -26,4 +26,13 @@ config SENSORS_PPC_OCC_P8_I2C
This driver can also be built as a module. If so, the module will be
called occ-p8-i2c.
+config SENSORS_PPC_OCC_P9_FSI
+ tristate "POWER9 OCC hwmon support"
+ help
+ Provide a hwmon sysfs interface for the POWER9 On-Chip Controller,
+ exposing temperature, frequency and power measurements.
+
+ This driver can also be built as a module. If so, the module will be
+ called occ-p9-fsi.
+
endif
diff --git a/drivers/hwmon/occ/Makefile b/drivers/hwmon/occ/Makefile
index 05a84e9..77e47e1 100644
--- a/drivers/hwmon/occ/Makefile
+++ b/drivers/hwmon/occ/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_SENSORS_PPC_OCC) += occ.o occ_sysfs.o
obj-$(CONFIG_SENSORS_PPC_OCC_P8_I2C) += occ_scom_i2c.o occ_p8.o occ_p8_i2c.o
+obj-$(CONFIG_SENSORS_PPC_OCC_P9_FSI) += occ_p9.o occ_p9_fsi.o
diff --git a/drivers/hwmon/occ/occ_p9_fsi.c b/drivers/hwmon/occ/occ_p9_fsi.c
new file mode 100644
index 0000000..2f651d1
--- /dev/null
+++ b/drivers/hwmon/occ/occ_p9_fsi.c
@@ -0,0 +1,93 @@
+/*
+ * occ_p9_fsi.c - hwmon OCC driver
+ *
+ * Copyright 2016 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+
+#include "scom.h"
+#include "occ_p9.h"
+#include "occ_sysfs.h"
+
+#define OCC_I2C_NAME "occ-p9-fsi"
+
+static char *caps_sensor_names[] = {
+ "curr_powercap",
+ "curr_powerreading",
+ "norm_powercap",
+ "max_powercap",
+ "min_powercap",
+ "user_powerlimit"
+};
+
+int p9_fsi_getscom(void *bus, u32 address, u8 *data, size_t offset)
+{
+ return -SCOM_READ_ERROR;
+}
+
+int p9_fsi_putscom(void *bus, u32 address, u32 data0, u32 data1)
+{
+ return -SCOM_WRITE_ERROR;
+}
+
+static struct occ_bus_ops p9_bus_ops = {
+ .getscom = p9_fsi_getscom,
+ .putscom = p9_fsi_putscom,
+};
+
+static struct occ_sysfs_config p9_sysfs_config = {
+ .num_caps_fields = ARRAY_SIZE(caps_sensor_names),
+ .caps_names = caps_sensor_names,
+};
+
+int occ_p9_probe(struct device *dev, void *client)
+{
+ struct occ *occ;
+ struct occ_sysfs *hwmon;
+
+ occ = occ_p9_start(dev, client, p9_bus_ops);
+ if (IS_ERR(occ))
+ return PTR_ERR(occ);
+
+ hwmon = occ_sysfs_start(dev, occ, &p9_sysfs_config);
+ if (IS_ERR(hwmon))
+ return PTR_ERR(hwmon);
+
+ return 0;
+}
+
+int occ_p9_remove(void)
+{
+ struct occ *occ = NULL;
+
+ return occ_p9_stop(occ);
+}
+
+/* used by device table */
+static const struct of_device_id occ_of_match[] = {
+ { .compatible = "ibm,occ-p9-fsi" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, occ_of_match);
+
+MODULE_AUTHOR("Eddie James <eajames at us.ibm.com>");
+MODULE_DESCRIPTION("BMC P9 OCC hwmon driver");
+MODULE_LICENSE("GPL");
--
1.9.1
More information about the openbmc
mailing list