[PATCH qemu 23/38] block: add a model option for MTD devices
Cédric Le Goater
clg at kaod.org
Mon Nov 21 21:31:12 AEDT 2016
On 11/21/2016 08:27 AM, Joel Stanley wrote:
> On Sat, Nov 19, 2016 at 12:52 AM, Cédric Le Goater <clg at kaod.org> wrote:
>> This could be used to define the flash model to use on some boards
>> definitions.
>
> Nice, I like it.
>
> Could we add an option specify the mac/ncsi setup of the system too?
> Some hardware will have a NCSI device on one MAC and a PHY on the
> other. It would be handy to be able to test those without adding a new
> board.
we could use a property at the machine level and propagate in the
sub device models :
-machine [type=]name[,prop[=value][,...]]
or directly use a property at the network device model.
-device driver[,prop[=value][,...]]
C.
>>
>> Signed-off-by: Cédric Le Goater <clg at kaod.org>
>
> Reviewed-by: Joel Stanley <joel at jms.id.au>
>
>> ---
>> blockdev.c | 13 +++++++++++++
>> include/sysemu/blockdev.h | 1 +
>> qemu-options.hx | 4 +++-
>> 3 files changed, 17 insertions(+), 1 deletion(-)
>>
>> diff --git a/blockdev.c b/blockdev.c
>> index 245e1e1d177a..fcea923edf02 100644
>> --- a/blockdev.c
>> +++ b/blockdev.c
>> @@ -742,6 +742,10 @@ QemuOptsList qemu_legacy_drive_opts = {
>> .type = QEMU_OPT_STRING,
>> .help = "pci address (virtio only)",
>> },{
>> + .name = "model",
>> + .type = QEMU_OPT_STRING,
>> + .help = "flash model (mtd only)",
>> + },{
>> .name = "serial",
>> .type = QEMU_OPT_STRING,
>> .help = "disk serial number",
>> @@ -790,6 +794,7 @@ DriveInfo *drive_new(QemuOpts *all_opts, BlockInterfaceType block_default_type)
>> bool read_only = false;
>> bool copy_on_read;
>> const char *serial;
>> + const char *model;
>> const char *filename;
>> Error *local_err = NULL;
>> int i;
>> @@ -1030,6 +1035,13 @@ DriveInfo *drive_new(QemuOpts *all_opts, BlockInterfaceType block_default_type)
>> g_free(new_id);
>> }
>>
>> + /* Add virtio block device */
>> + model = qemu_opt_get(legacy_opts, "model");
>> + if (model && type != IF_MTD) {
>> + error_report("model is not supported by this bus type");
>> + goto fail;
>> + }
>> +
>> /* Add virtio block device */
>> devaddr = qemu_opt_get(legacy_opts, "addr");
>> if (devaddr && type != IF_VIRTIO) {
>> @@ -1102,6 +1114,7 @@ DriveInfo *drive_new(QemuOpts *all_opts, BlockInterfaceType block_default_type)
>> dinfo->unit = unit_id;
>> dinfo->devaddr = devaddr;
>> dinfo->serial = g_strdup(serial);
>> + dinfo->model = g_strdup(model);
>>
>> blk_set_legacy_dinfo(blk, dinfo);
>>
>> diff --git a/include/sysemu/blockdev.h b/include/sysemu/blockdev.h
>> index 16432f350805..10c66e5e86a4 100644
>> --- a/include/sysemu/blockdev.h
>> +++ b/include/sysemu/blockdev.h
>> @@ -39,6 +39,7 @@ struct DriveInfo {
>> int cyls, heads, secs, trans;
>> QemuOpts *opts;
>> char *serial;
>> + char *model;
>> QTAILQ_ENTRY(DriveInfo) next;
>> };
>>
>> diff --git a/qemu-options.hx b/qemu-options.hx
>> index 4a5b29f349f7..16add85bd0f5 100644
>> --- a/qemu-options.hx
>> +++ b/qemu-options.hx
>> @@ -517,7 +517,7 @@ DEF("drive", HAS_ARG, QEMU_OPTION_drive,
>> "-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]\n"
>> " [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]\n"
>> " [,cache=writethrough|writeback|none|directsync|unsafe][,format=f]\n"
>> - " [,serial=s][,addr=A][,rerror=ignore|stop|report]\n"
>> + " [,serial=s][,model=m][,addr=A][,rerror=ignore|stop|report]\n"
>> " [,werror=ignore|stop|report|enospc][,id=name][,aio=threads|native]\n"
>> " [,readonly=on|off][,copy-on-read=on|off]\n"
>> " [,discard=ignore|unmap][,detect-zeroes=on|off|unmap]\n"
>> @@ -570,6 +570,8 @@ the format. Can be used to specify format=raw to avoid interpreting
>> an untrusted format header.
>> @item serial=@var{serial}
>> This option specifies the serial number to assign to the device.
>> + at item model=@var{model}
>> +This option specifies the model to use to create a flash device (if=mtd only).
>> @item addr=@var{addr}
>> Specify the controller's PCI address (if=virtio only).
>> @item werror=@var{action},rerror=@var{action}
>> --
>> 2.7.4
>>
>> _______________________________________________
>> openbmc mailing list
>> openbmc at lists.ozlabs.org
>> https://lists.ozlabs.org/listinfo/openbmc
More information about the openbmc
mailing list