Firestone cannot access local network

[Hann Wang]

Hi Patrick,

I confirmed subnet mask and route are correct.

eth0      Link encap:Ethernet  HWaddr 70:E2:84:14:0F:2F
          inet addr:172.18.0.151  Bcast:172.18.255.255  Mask:255.255.0.0
          inet6 addr: fe80::72e2:84ff:fe14:f2f%984/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:35 errors:0 dropped:0 overruns:0 frame:0
          TX packets:43 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:5992 (5.8 KiB)  TX bytes:9522 (9.2 KiB)

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use
Iface
default         gateway         0.0.0.0         UG    1024   0        0 eth0
172.18.0.0      *               255.255.0.0     U     0      0        0 eth0
172.18.0.1      *               255.255.255.255 UH    1024   0        0 eth0


2016-11-17 0:07 GMT+08:00 Patrick Williams <patrick at stwcx.xyz>:

> On Wed, Nov 16, 2016 at 07:03:44PM +0800, Hann Wang wrote:
> > I add BCM54210E drvier to linux kernel, my machine can get IP from DHCP
> > serverip now.
> > I try access internet is good, but I can't access local network.
> > I can ping my laptop in local network, but ssh/telnet/tftp doesn't work.
> > I access from another laptop to my laptop is ok.
>
> That sounds like the subnet mask is wrong?  Have you confirmed
> 'ifconfig' and 'route' look correct?
>
> --
> Patrick Williams
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20161117/1df31acd/attachment.html>