[PATCH linux 1/2] ARM: dts: aspeed: zaius: Add 1-wire buses
Xo Wang
xow at google.com
Thu Nov 17 10:29:14 AEDT 2016
Add device-tree bindings to instantiate GPIO-based 1-wire buses. These
go to headers for DS18B20 thermal sensors.
Signed-off-by: Xo Wang <xow at google.com>
---
arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
index b52e45e..3d997d9 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
@@ -20,6 +20,26 @@
reg = <0x80000000 0x40000000>;
};
+ onewire0 {
+ compatible = "w1-gpio";
+ gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+ };
+
+ onewire1 {
+ compatible = "w1-gpio";
+ gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+ };
+
+ onewire2 {
+ compatible = "w1-gpio";
+ gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+ };
+
+ onewire3 {
+ compatible = "w1-gpio";
+ gpios = <&gpio ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+ };
+
leds {
compatible = "gpio-leds";
--
2.8.0.rc3.226.g39d4020
More information about the openbmc
mailing list