[PATCH linux] Updated SCU88 register and SCU90 init values

[OpenBMC Patches]

Before This change:
a) SCU90[0]=1, function pin Incorrectly defined. It must be pull down internally.
b) For SCU88, bits 7:0 were set to 1. That is: We were reading : PWMx or VPIGx instead of GPIONx (GPIONx gives us the PCIe inventory status, where x is bit number). Because of this PCIe inventory was showing up wrong.

After This Change:
a) SCU90[0]=0 
b) Bits (7:0) of SCU 88 are set to 0 . (According to Page 111 of data sheet these have to be set to 0 for us to to read GPION0 to GPIO N7 which indicate if PCIe device is present ). 

Description of pins 0 of SCU 90:
Enable SD1 Function Pin 

Description of pins 7:0 of SCU 88:
7 RW Enable PWM7 or VPIG7 function pin  (SCU90[5:4]=0x2 select Video pin)
6 RW Enable PWM6 or VPIG6 function pin   (SCU90[5:4]=0x2 select Video pin)
5 RW Enable PWM5 or VPIG5 function pin    (SCU90[5:4]!=0 select Video pin)
4 RW Enable PWM4 or VPIG4 function pin     (SCU90[5:4]!=0 select Video pin)
3 RW Enable PWM3 or VPIG3 function pin      (SCU90[5:4]!=0 select Video pin)
2 RW Enable PWM2 or VPIG2 function pin        (SCU90[5:4]!=0 select Video pin)
1 RW Enable PWM1 or VPIG1 function pin        (SCU90[5:4]=0x3 select Video pin)
0 RW Enable PWM0 or VPIG0 function pin         (SCU90[5:4]=0x3 select Video pin)

<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.io/review_button.svg" height="35" align="absmiddle" alt="Reviewable"/>](https://reviewable.io/reviews/openbmc/linux/63)
<!-- Reviewable:end -->


https://github.com/openbmc/linux/pull/63

Adi Gangidi (1):
  Updated SCU88 register and SCU90 init values

 arch/arm/mach-aspeed/aspeed.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

-- 
2.7.1