[PATCH qemu 2/2] ast2400: Integrate the SCU model and configure reset values

[Cédric Le Goater]

On 06/09/2016 10:14 AM, Andrew Jeffery wrote:
> Almost all configured reset values are specified by the datasheet. The
> exception is ASPEED_SCU_SOC_SCRATCH1, where we mark the DRAM as
> successfully initialised by the SoC to avoid unnecessary dark corners in
> the SoC's u-boot support.
> 
> Signed-off-by: Andrew Jeffery <andrew at aj.id.au>
> ---
>  hw/arm/ast2400.c         | 47 +++++++++++++++++++++++++++++++++++++++++++++++
>  include/hw/arm/ast2400.h |  2 ++
>  2 files changed, 49 insertions(+)
> 
> diff --git a/hw/arm/ast2400.c b/hw/arm/ast2400.c
> index 4a9de0e10cbc..240da180befa 100644
> --- a/hw/arm/ast2400.c
> +++ b/hw/arm/ast2400.c
> @@ -24,12 +24,46 @@
>  #define AST2400_IOMEM_SIZE       0x00200000
>  #define AST2400_IOMEM_BASE       0x1E600000
>  #define AST2400_VIC_BASE         0x1E6C0000
> +#define AST2400_SCU_BASE         0x1E6E2000
>  #define AST2400_TIMER_BASE       0x1E782000
>  #define AST2400_I2C_BASE         0x1E78A000
>  
>  static const int uart_irqs[] = { 9, 32, 33, 34, 10 };
>  static const int timer_irqs[] = { 16, 17, 18, 35, 36, 37, 38, 39, };
>  
> +static const AspeedSCUResetCfg scu_reset[] = {
> +    /* Values are defaults from the datasheet except where noted */
> +    { ASPEED_SCU_SYS_RST_CTRL,   0xFFCFFEDCU },
> +    { ASPEED_SCU_CLK_SEL,        0xF3F40000U },
> +    { ASPEED_SCU_CLK_STOP_CTRL,  0x19FC3E8BU },
> +    { ASPEED_SCU_D2PLL_PARAM,    0x00026108U },
> +    { ASPEED_SCU_MPLL_PARAM,     0x00030291U },
> +    { ASPEED_SCU_HPLL_PARAM,     0x00000291U },
> +    { ASPEED_SCU_MISC_CTRL1,     0x00000010U },
> +    { ASPEED_SCU_PCI_CTRL1,      0x20001A03U },
> +    { ASPEED_SCU_PCI_CTRL2,      0x20001A03U },
> +    { ASPEED_SCU_PCI_CTRL3,      0x04000030U },
> +    { ASPEED_SCU_SYS_RST_STATUS, 0x00000001U },
> +    { ASPEED_SCU_SOC_SCRATCH1,   0x000000C0U }, /* SoC completed DRAM init */
> +    { ASPEED_SCU_MISC_CTRL2,     0x00000023U },
> +    { ASPEED_SCU_RNG_CTRL,       0x0000000EU },
> +    { ASPEED_SCU_REV_ID,         0x02000303U },
> +    { ASPEED_SCU_PINMUX_CTRL2,   0x0000F000U },
> +    { ASPEED_SCU_PINMUX_CTRL3,   0x01000000U },
> +    { ASPEED_SCU_PINMUX_CTRL4,   0x000000FFU },
> +    { ASPEED_SCU_PINMUX_CTRL5,   0x0000A000U },
> +    { ASPEED_SCU_WDT_RST_CTRL,   0x003FFFF3U },
> +    { ASPEED_SCU_PINMUX_CTRL8,   0xFFFF0000U },

       { ASPEED_SCU_PINMUX_CTRL9,   0x000FFFFFU },

Reviewed-by: Cédric Le Goater <clg at kaod.org>

Thanks,

C. 


> +    { ASPEED_SCU_FREE_CNTR4,     0x000000FFU },
> +    { ASPEED_SCU_FREE_CNTR4_EXT, 0x000000FFU },
> +    { ASPEED_SCU_CPU2_BASE_SEG1, 0x80000000U },
> +    { ASPEED_SCU_CPU2_BASE_SEG4, 0x1E600000U },
> +    { ASPEED_SCU_CPU2_BASE_SEG5, 0xC0000000U },
> +    { ASPEED_SCU_UART_HPLL_CLK,  0x00001903U },
> +    { ASPEED_SCU_PCIE_CTRL,      0x0000007BU },
> +    { ASPEED_SCU_BMC_DEV_ID,     0x00002402U }
> +};
> +
>  /*
>   * IO handlers: simply catch any reads/writes to IO addresses that aren't
>   * handled by a device mapping.
> @@ -72,6 +106,10 @@ static void ast2400_init(Object *obj)
>      object_initialize(&s->i2c, sizeof(s->i2c), TYPE_ASPEED_I2C);
>      object_property_add_child(obj, "i2c", OBJECT(&s->i2c), NULL);
>      qdev_set_parent_bus(DEVICE(&s->i2c), sysbus_get_default());
> +
> +    object_initialize(&s->scu, sizeof(s->scu), TYPE_ASPEED_SCU);
> +    object_property_add_child(obj, "scu", OBJECT(&s->scu), NULL);
> +    qdev_set_parent_bus(DEVICE(&s->scu), sysbus_get_default());
>  }
>  
>  static void ast2400_realize(DeviceState *dev, Error **errp)
> @@ -110,6 +148,15 @@ static void ast2400_realize(DeviceState *dev, Error **errp)
>          sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq);
>      }
>  
> +    /* SCU */
> +    aspeed_scu_configure_reset(&s->scu, scu_reset, ARRAY_SIZE(scu_reset), &err);
> +    object_property_set_bool(OBJECT(&s->scu), true, "realized", &err);
> +    if (err) {
> +        error_propagate(errp, err);
> +        return;
> +    }
> +    sysbus_mmio_map(SYS_BUS_DEVICE(&s->scu), 0, AST2400_SCU_BASE);
> +
>      /* UART - attach an 8250 to the IO space as our UART5 */
>      if (serial_hds[0]) {
>          qemu_irq uart5 = qdev_get_gpio_in(DEVICE(&s->vic), uart_irqs[4]);
> diff --git a/include/hw/arm/ast2400.h b/include/hw/arm/ast2400.h
> index c05ed5376736..f1a64fd3893d 100644
> --- a/include/hw/arm/ast2400.h
> +++ b/include/hw/arm/ast2400.h
> @@ -14,6 +14,7 @@
>  
>  #include "hw/arm/arm.h"
>  #include "hw/intc/aspeed_vic.h"
> +#include "hw/misc/aspeed_scu.h"
>  #include "hw/timer/aspeed_timer.h"
>  #include "hw/i2c/aspeed_i2c.h"
>  
> @@ -27,6 +28,7 @@ typedef struct AST2400State {
>      AspeedVICState vic;
>      AspeedTimerCtrlState timerctrl;
>      AspeedI2CState i2c;
> +    AspeedSCUState scu;
>  } AST2400State;
>  
>  #define TYPE_AST2400 "ast2400"
>