[PATCH qemu 05/12] ast2400: handle SPI flash Command mode (read only)

[Andrew Jeffery]

On Sun, 2016-05-29 at 23:19 +0200, Cédric Le Goater wrote:
> We can now use directly the m25p80 flash storage to handle memory
> accesses when the SPI flash slave is configured in Command mode. Only
> read only accesses are handled. Command mode is only required by
> U-Boot, Linux does not use it yet.
> 
> Handling write accesses would demand more changes to the m25p80 flash
> model.
> 
> Signed-off-by: Cédric Le Goater <clg at kaod.org>

Assuming the m25p80_get_storage() is acceptable upstream,

Reviewed-by: Andrew Jeffery <andrew at aj.id.au>

> ---
>  hw/ssi/aspeed_smc.c         | 18 +++++++++++++++---
>  include/hw/ssi/aspeed_smc.h |  2 ++
>  2 files changed, 17 insertions(+), 3 deletions(-)
> 
> diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c
> index 4175356141e7..159ab691051d 100644
> --- a/hw/ssi/aspeed_smc.c
> +++ b/hw/ssi/aspeed_smc.c
> @@ -28,6 +28,7 @@
>  #include "qemu/log.h"
>  #include "include/qemu/error-report.h"
>  #include "exec/address-spaces.h"
> +#include "hw/block/flash.h"
>  
>  #include "hw/ssi/aspeed_smc.h"
>  
> @@ -284,8 +285,9 @@ static uint64_t aspeed_smc_flash_read(void *opaque, hwaddr addr, unsigned size)
>              ret = (ret << 8) | ssi_transfer(s->spi, 0x0);
>          }
>      } else {
> -        error_report("%s: flash not in usermode", __func__);
> -        ret = -1;
> +        for (i = 0; i < size; i++) {
> +            ret = (ret << 8) | fl->storage[addr + i];
> +        }
>      }
>  
>      return ret;
> @@ -330,6 +332,11 @@ static void aspeed_smc_flash_reset(DeviceState *d)
>  
>  static int aspeed_smc_flash_init(SysBusDevice *sbd)
>  {
> +    DeviceState *dev = DEVICE(sbd);
> +    AspeedSMCFlashState *s = ASPEED_SMC_FLASH(dev);
> +
> +    s->size = 0;
> +    s->storage = NULL;
>      return 0;
>  }
>  
> @@ -422,8 +429,13 @@ void aspeed_smc_init_flashes(AspeedSMCState *s, const char *flashtype)
>          cs_line = qdev_get_gpio_in_named(fl->flash, SSI_GPIO_CS, 0);
>          sysbus_connect_irq(SYS_BUS_DEVICE(s), i + 1, cs_line);
>  
> +        fl->storage = m25p80_get_storage(DEVICE(fl->flash), &fl->size);
> +        if (fl->size > aspeed_segments[s->smc_type][i].size) {
> +            fl->size = aspeed_segments[s->smc_type][i].size;
> +        }
> +
>          memory_region_init_io(&fl->mmio, new, &aspeed_smc_flash_ops, fl, name,
> -                              aspeed_segments[s->smc_type][i].size);
> +                              fl->size);
>          sysbus_init_mmio(SYS_BUS_DEVICE(new), &fl->mmio);
>  
>          sysbus_mmio_map(SYS_BUS_DEVICE(new), 0,
> diff --git a/include/hw/ssi/aspeed_smc.h b/include/hw/ssi/aspeed_smc.h
> index 1625dfb76a63..2615ce9fa8aa 100644
> --- a/include/hw/ssi/aspeed_smc.h
> +++ b/include/hw/ssi/aspeed_smc.h
> @@ -38,6 +38,8 @@ typedef struct AspeedSMCFlashState {
>  
>      MemoryRegion mmio;
>      int id;
> +    uint32_t size;
> +    uint8_t *storage;
>      struct AspeedSMCState *controller;
>      DeviceState *flash;
>  } AspeedSMCFlashState;
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: This is a digitally signed message part
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20160607/31382fdd/attachment.sig>