[PATCH skeleton] Implement new LED driver
OpenBMC Patches
openbmc-patches at stwcx.xyz
Wed Feb 10 08:30:53 AEDT 2016
From: Adriana Kobylak <anoo at us.ibm.com>
Verification for the new LED driver is completed so time to replace the
previous gpio implementation with the new one. This entails
replacing the led_controller file with the led_controller_new file,
updating the dbus interface name so that it is the same as the previous
one, and updating the code with the new led names.
---
Makefile | 7 +-
bin/Barreleye.py | 12 +-
bin/Palmetto.py | 6 +-
bin/chassis_control.py | 2 +-
bin/obmcutil | 2 +-
objects/led_controller.c | 617 ++++++++++++++++++++++++++++++++-----------
objects/led_controller_new.c | 488 ----------------------------------
7 files changed, 470 insertions(+), 664 deletions(-)
delete mode 100755 objects/led_controller_new.c
diff --git a/Makefile b/Makefile
index 65787ff..49600ba 100755
--- a/Makefile
+++ b/Makefile
@@ -36,11 +36,8 @@ libopenbmc_intf: openbmc_intf.o
power_control: power_control_obj.o gpio.o object_mapper.o libopenbmc_intf
$(CC) -o bin/$@.exe obj/gpio.o obj/power_control_obj.o obj/object_mapper.o $(LDFLAGS) $(LIBS)
-led_controller: led_controller.o gpio.o object_mapper.o libopenbmc_intf
- $(CC) -o bin/$@.exe obj/gpio.o obj/led_controller.o obj/object_mapper.o $(LDFLAGS) $(LIBS)
-
-led_controller_new: led_controller_new.o
- $(CC) -o bin/$@.exe obj/led_controller_new.o $(LDFLAGS) $(LIBS) -lsystemd
+led_controller: led_controller.o
+ $(CC) -o bin/$@.exe obj/led_controller.o $(LDFLAGS) $(LIBS) -lsystemd
button_power: button_power_obj.o gpio.o object_mapper.o libopenbmc_intf
$(CC) -o bin/$@.exe obj/button_power_obj.o obj/gpio.o obj/object_mapper.o $(LDFLAGS) $(LIBS)
diff --git a/bin/Barreleye.py b/bin/Barreleye.py
index 386a2d6..2fa1c20 100755
--- a/bin/Barreleye.py
+++ b/bin/Barreleye.py
@@ -29,7 +29,7 @@ EXIT_STATE_DEPEND = {
},
'BMC_STARTING' : {
'/org/openbmc/control/power0' : 0,
- '/org/openbmc/control/led/BMC_READY' : 0,
+ '/org/openbmc/control/led/identify' : 0,
'/org/openbmc/control/host0' : 0,
'/org/openbmc/control/flash/bios' : 0,
'/org/openbmc/sensors/speed/fan5': 0,
@@ -56,14 +56,14 @@ ENTER_STATE_CALLBACK = {
},
'setOn' : {
'bus_name' : 'org.openbmc.control.led',
- 'obj_name' : '/org/openbmc/control/led/BMC_READY',
+ 'obj_name' : '/org/openbmc/control/led/identify',
'interface_name' : 'org.openbmc.Led',
}
},
'HOST_POWERED_OFF' : {
'setOff' : {
'bus_name' : 'org.openbmc.control.led',
- 'obj_name' : '/org/openbmc/control/led/BMC_READY',
+ 'obj_name' : '/org/openbmc/control/led/identify',
'interface_name' : 'org.openbmc.Led',
}
@@ -71,7 +71,7 @@ ENTER_STATE_CALLBACK = {
'BMC_READY' : {
'setOn' : {
'bus_name' : 'org.openbmc.control.led',
- 'obj_name' : '/org/openbmc/control/led/BEEP',
+ 'obj_name' : '/org/openbmc/control/led/beep',
'interface_name' : 'org.openbmc.Led',
},
'init' : {
@@ -537,14 +537,10 @@ GPIO_CONFIG['FSI_ENABLE'] = { 'gpio_pin': 'D0', 'direction': 'out' }
GPIO_CONFIG['POWER_PIN'] = { 'gpio_pin': 'E1', 'direction': 'out' }
GPIO_CONFIG['CRONUS_SEL'] = { 'gpio_pin': 'A6', 'direction': 'out' }
GPIO_CONFIG['PGOOD'] = { 'gpio_pin': 'C7', 'direction': 'in' }
-GPIO_CONFIG['IDENTIFY'] = { 'gpio_pin': 'R5', 'direction': 'out' }
-GPIO_CONFIG['BMC_READY'] = { 'gpio_pin': 'H2', 'direction': 'out' }
GPIO_CONFIG['POWER_BUTTON'] = { 'gpio_pin': 'E0', 'direction': 'both' }
GPIO_CONFIG['PCIE_RESET'] = { 'gpio_pin': 'B5', 'direction': 'out' }
GPIO_CONFIG['USB_RESET'] = { 'gpio_pin': 'B6', 'direction': 'out' }
-GPIO_CONFIG['BEEP'] = { 'gpio_pin': 'N7', 'direction': 'out' }
-GPIO_CONFIG['HEART_BEAT'] = { 'gpio_pin': 'R4', 'direction': 'out' }
GPIO_CONFIG['BMC_THROTTLE'] = { 'gpio_pin': 'J3', 'direction': 'out' }
GPIO_CONFIG['RESET_BUTTON'] = { 'gpio_pin': 'E2', 'direction': 'both' }
GPIO_CONFIG['CPLD_TCK'] = { 'gpio_pin': 'P0', 'direction': 'out' }
diff --git a/bin/Palmetto.py b/bin/Palmetto.py
index 7a6c704..ee95999 100755
--- a/bin/Palmetto.py
+++ b/bin/Palmetto.py
@@ -29,7 +29,7 @@ EXIT_STATE_DEPEND = {
'BMC_STARTING' : {
'/org/openbmc/control/chassis0': 0,
'/org/openbmc/control/power0' : 0,
- '/org/openbmc/control/led/BMC_READY' : 0,
+ '/org/openbmc/control/led/identify' : 0,
'/org/openbmc/control/host0' : 0,
'/org/openbmc/control/flash/bios' : 0,
}
@@ -47,7 +47,7 @@ ENTER_STATE_CALLBACK = {
'BMC_READY' : {
'setOn' : {
'bus_name' : 'org.openbmc.control.led',
- 'obj_name' : '/org/openbmc/control/led/BMC_READY',
+ 'obj_name' : '/org/openbmc/control/led/identify',
'interface_name' : 'org.openbmc.Led',
},
'init' : {
@@ -276,8 +276,6 @@ GPIO_CONFIG['POWER_PIN'] = { 'gpio_pin': 'E1', 'direction': 'out' }
GPIO_CONFIG['CRONUS_SEL'] = { 'gpio_pin': 'A6', 'direction': 'out' }
GPIO_CONFIG['PGOOD'] = { 'gpio_pin': 'C7', 'direction': 'in' }
GPIO_CONFIG['BMC_THROTTLE'] = { 'gpio_pin': 'J3', 'direction': 'out' }
-GPIO_CONFIG['IDENTIFY'] = { 'gpio_pin': 'R4', 'direction': 'out' }
-GPIO_CONFIG['BMC_READY'] = { 'gpio_pin': 'R4', 'direction': 'out' }
GPIO_CONFIG['POWER_BUTTON'] = { 'gpio_pin': 'E0', 'direction': 'both' }
GPIO_CONFIG['PCIE_RESET'] = { 'gpio_pin': 'B5', 'direction': 'out' }
GPIO_CONFIG['USB_RESET'] = { 'gpio_pin': 'B6', 'direction': 'out' }
diff --git a/bin/chassis_control.py b/bin/chassis_control.py
index ad7a6ad..fbadcde 100755
--- a/bin/chassis_control.py
+++ b/bin/chassis_control.py
@@ -33,7 +33,7 @@ class ChassisControlObject(Openbmc.DbusProperties,Openbmc.DbusObjectManager):
},
'identify_led' : {
'bus_name' : 'org.openbmc.control.led',
- 'object_name' : '/org/openbmc/led/IDENTIFY',
+ 'object_name' : '/org/openbmc/control/led/identify',
'interface_name' : 'org.openbmc.Led'
},
'watchdog' : {
diff --git a/bin/obmcutil b/bin/obmcutil
index 6985e8b..bd753ca 100755
--- a/bin/obmcutil
+++ b/bin/obmcutil
@@ -62,7 +62,7 @@ dbus_objects = {
},
'identify_led' : {
'bus_name' : 'org.openbmc.control.led',
- 'object_name' : '/org/openbmc/control/led/IDENTIFY',
+ 'object_name' : '/org/openbmc/control/led/identify',
'interface_name' : 'org.openbmc.Led'
},
'chassis' : {
diff --git a/objects/led_controller.c b/objects/led_controller.c
index 1240b30..3ceda38 100755
--- a/objects/led_controller.c
+++ b/objects/led_controller.c
@@ -1,185 +1,488 @@
-#include "interfaces/openbmc_intf.h"
#include <stdio.h>
-#include "openbmc.h"
-#include "gpio.h"
-#include "object_mapper.h"
+#include <stdlib.h>
+#include <errno.h>
+#include <string.h>
+#include <dirent.h>
+#include <systemd/sd-bus.h>
-/* ---------------------------------------------------------------------------------------------------- */
-static const gchar* dbus_object_path = "/org/openbmc/control/led";
-static const gchar* dbus_name = "org.openbmc.control.led";
+/*
+ * These are control files that are present for each led under
+ *'/sys/class/leds/<led_name>/' which are used to trigger action
+ * on the respective leds by writing predefined data.
+ */
+const char *power_ctrl = "brightness";
+const char *blink_ctrl = "trigger";
+const char *duty_on = "delay_on";
+const char *duty_off = "delay_off";
-static GDBusObjectManagerServer *manager = NULL;
+/*
+ * --------------------------------------------------
+ * Given the dbus path, returns the name of the LED
+ * --------------------------------------------------
+ */
+char *get_led_name(const char *dbus_path)
+{
+ char *led_name = NULL;
-#define NUM_GPIO 4
+ /* Get the led name from /org/openbmc/control/led/<name> */
+ led_name = strrchr(dbus_path, '/');
+ if(led_name)
+ {
+ led_name++;
+ }
-GPIO led_gpio[NUM_GPIO] = {
- (GPIO){"IDENTIFY"},
- (GPIO){"BMC_READY"},
- (GPIO){"BEEP"},
- (GPIO){"HEART_BEAT"}
-};
+ return led_name;
+}
+
+/*
+ * -------------------------------------------------------------------------
+ * Writes the 'on / off / blink' trigger to leds.
+ * -------------------------------------------------------------------------
+ */
+int write_to_led(const char *name, const char *ctrl_file, const char *value)
+{
+ /* Generic error reporter. */
+ int rc = -1;
+
+ /* To get /sys/class/leds/<name>/<control file> */
+ char led_path[128] = {0};
+
+ int len = 0;
+ len = snprintf(led_path, sizeof(led_path),
+ "/sys/class/leds/%s/%s",name, ctrl_file);
+ if(len >= sizeof(led_path))
+ {
+ fprintf(stderr, "Error. LED path is too long. :[%d]\n",len);
+ return rc;
+ }
+ FILE *fp = fopen(led_path,"w");
+ if(fp == NULL)
+ {
+ perror("Error:");
+ fprintf(stderr,"Error opening:[%s]\n",led_path);
+ return rc;
+ }
-static gboolean
-on_set_on (Led *led,
- GDBusMethodInvocation *invocation,
- gpointer user_data)
+ rc = fwrite(value, strlen(value), 1, fp);
+ if(rc != 1)
+ {
+ perror("Error:");
+ fprintf(stderr, "Error writing to :[%s]\n",led_path);
+ }
+
+ fclose(fp);
+
+ /* When we get here, rc would be what it was from writing to the file */
+ return (rc == 1) ? 0 : -1;
+}
+
+/*
+ * ----------------------------------------------------------------
+ * Router function for any LED operations that come via dbus
+ *----------------------------------------------------------------
+ */
+static int led_function_router(sd_bus_message *msg, void *user_data,
+ sd_bus_error *ret_error)
{
- GPIO* mygpio = (GPIO*)user_data;
- g_print("Turn on LED: %s\n",mygpio->name);
- led_complete_set_on(led,invocation);
- int rc = GPIO_OK;
- do {
- rc = gpio_open(mygpio);
- if (rc != GPIO_OK) { break; }
- rc = gpio_write(mygpio,0);
- if (rc != GPIO_OK) { break; }
- led_set_state(led,"on");
-
- } while(0);
- gpio_close(mygpio);
- if (rc != GPIO_OK)
- {
- g_print("ERROR ledcontrol: GPIO error %s (rc=%d)\n",mygpio->name,rc);
- }
- return TRUE;
+ /* Generic error reporter. */
+ int rc = -1;
+
+ /* Extract the led name from the full dbus path */
+ const char *led_path = sd_bus_message_get_path(msg);
+ if(led_path == NULL)
+ {
+ fprintf(stderr, "Error. LED path is empty");
+ return sd_bus_reply_method_return(msg, "i", rc);
+ }
+
+ char *led_name = get_led_name(led_path);
+ if(led_name == NULL)
+ {
+ fprintf(stderr, "Invalid LED name for path :[%s]\n",led_path);
+ return sd_bus_reply_method_return(msg, "i", rc);
+ }
+
+ /* Now that we have the LED name, get the Operation. */
+ const char *led_function = sd_bus_message_get_member(msg);
+ if(led_function == NULL)
+ {
+ fprintf(stderr, "Null LED function specificed for : [%s]\n",led_name);
+ return sd_bus_reply_method_return(msg, "i", rc);
+ }
+
+ /* Route the user action to appropriate handlers. */
+ if( (strcmp(led_function, "setOn") == 0) ||
+ (strcmp(led_function, "setOff") == 0))
+ {
+ rc = led_stable_state_function(led_name, led_function);
+ return sd_bus_reply_method_return(msg, "i", rc);
+ }
+ else if( (strcmp(led_function, "setBlinkFast") == 0) ||
+ (strcmp(led_function, "setBlinkSlow") == 0))
+ {
+ rc = led_default_blink(led_name, led_function);
+ return sd_bus_reply_method_return(msg, "i", rc);
+ }
+ else if(strcmp(led_function, "GetLedState") == 0)
+ {
+ char value_str[10] = {0};
+ const char *led_state = NULL;
+
+ rc = read_led(led_name, power_ctrl, value_str, sizeof(value_str));
+ if(rc >= 0)
+ {
+ /* LED is active low */
+ led_state = strtoul(value_str, NULL, 0) ? "Off" : "On";
+ }
+ return sd_bus_reply_method_return(msg, "is", rc, led_state);
+ }
+ else
+ {
+ fprintf(stderr,"Invalid LED function:[%s]\n",led_function);
+ }
+
+ return sd_bus_reply_method_return(msg, "i", rc);
}
-static gboolean
-on_set_off (Led *led,
- GDBusMethodInvocation *invocation,
- gpointer user_data)
+/*
+ * --------------------------------------------------------------
+ * Turn On or Turn Off the LED
+ * --------------------------------------------------------------
+ */
+int led_stable_state_function(char *led_name, char *led_function)
{
- GPIO* mygpio = (GPIO*)user_data;
- g_print("Turn off LED: %s\n",mygpio->name);
- led_complete_set_off(led,invocation);
- int rc = GPIO_OK;
- do {
- rc = gpio_open(mygpio);
- if (rc != GPIO_OK) { break; }
- rc = gpio_write(mygpio,1);
- if (rc != GPIO_OK) { break; }
- led_set_state(led,"off");
- } while(0);
- gpio_close(mygpio);
- if (rc != GPIO_OK)
- {
- g_print("ERROR led controller: GPIO error %s (rc=%d)\n",mygpio->name,rc);
- }
- return TRUE;
+ /* Generic error reporter. */
+ int rc = -1;
+
+ const char *value = NULL;
+ if(strcmp(led_function, "setOn") == 0)
+ {
+ /* LED active low */
+ value = "0";
+ }
+ else if(strcmp(led_function, "setOff") == 0)
+ {
+ value = "255";
+ }
+ else
+ {
+ fprintf(stderr,"Invalid LED stable state operation:[%s] \n",led_function);
+ return rc;
+ }
+
+ /*
+ * Before doing anything, need to turn off the blinking
+ * if there is one in progress by writing 'none' to trigger
+ */
+ rc = write_to_led(led_name, blink_ctrl, "none");
+ if(rc < 0)
+ {
+ fprintf(stderr,"Error disabling blink. Function:[%s]\n", led_function);
+ return rc;
+ }
+
+ /*
+ * Open the brightness file and write corresponding values.
+ */
+ rc = write_to_led(led_name, power_ctrl, value);
+ if(rc < 0)
+ {
+ fprintf(stderr,"Error driving LED. Function:[%s]\n", led_function);
+ }
+
+ return rc;
}
-void init_led(Led* led, GPIO* mygpio)
+//-----------------------------------------------------------------------------------
+// Given the on and off duration, applies the action on the specified LED.
+//-----------------------------------------------------------------------------------
+int blink_led(const char *led_name, const char *on_duration, const char *off_duration)
{
- int rc = GPIO_OK;
- do {
- uint8_t val;
- rc = gpio_open(mygpio);
- if (rc != GPIO_OK) { break; }
- rc = gpio_read(mygpio,&val);
- if (rc != GPIO_OK) { break; }
- if (val == 0) {
- led_set_state(led,"on");
- } else {
- led_set_state(led,"off");
- }
- } while(0);
- gpio_close(mygpio);
- if (rc != GPIO_OK) {
- g_print("ERROR led controller: GPIO error %s (rc=%d)\n",
- mygpio->name,rc);
- }
+ /* Generic error reporter */
+ int rc = -1;
+
+ /* Protocol demands that 'timer' be echoed to 'trigger' */
+ rc = write_to_led(led_name, blink_ctrl, "timer");
+ if(rc < 0)
+ {
+ fprintf(stderr,"Error writing timer to Led:[%s]\n", led_name);
+ return rc;
+ }
+
+ /*
+ * After writing 'timer to 'trigger', 2 new files get generated namely
+ *'delay_on' and 'delay_off' which are telling the time duration for a
+ * particular LED on and off.
+ */
+ rc = write_to_led(led_name, duty_on, on_duration);
+ if(rc < 0)
+ {
+ fprintf(stderr,"Error writing [%s] to delay_on:[%s]\n",on_duration,led_name);
+ return rc;
+ }
+
+ rc = write_to_led(led_name, duty_off, off_duration);
+ if(rc < 0)
+ {
+ fprintf(stderr,"Error writing [%s] to delay_off:[%s]\n",off_duration,led_name);
+ }
+
+ return rc;
}
-static void
-on_bus_acquired (GDBusConnection *connection,
- const gchar *name,
- gpointer user_data)
+/*
+ * ----------------------------------------------------
+ * Default blink action on the LED.
+ * ----------------------------------------------------
+ */
+int led_default_blink(char *led_name, char *blink_type)
{
- ObjectSkeleton *object;
-
- cmdline *cmd = user_data;
-
- manager = g_dbus_object_manager_server_new (dbus_object_path);
- int i = 0;
- for (i=0;i<NUM_GPIO;i++)
- {
- gchar *s;
- s = g_strdup_printf ("%s/%s",dbus_object_path,led_gpio[i].name);
- object = object_skeleton_new (s);
- g_free (s);
-
- Led *led = led_skeleton_new ();
- object_skeleton_set_led (object, led);
- g_object_unref (led);
-
- ObjectMapper* mapper = object_mapper_skeleton_new ();
- object_skeleton_set_object_mapper (object, mapper);
- g_object_unref (mapper);
-
- //define method callbacks
- g_signal_connect (led,
- "handle-set-on",
- G_CALLBACK (on_set_on),
- &led_gpio[i]); /* user_data */
- g_signal_connect (led,
- "handle-set-off",
- G_CALLBACK (on_set_off),
- &led_gpio[i]);
-
- led_set_color(led,0);
- led_set_function(led,led_gpio[i].name);
-
- gpio_init(connection,&led_gpio[i]);
- init_led(led, &led_gpio[i]);
- /* Export the object (@manager takes its own reference to @object) */
- g_dbus_object_manager_server_export (manager, G_DBUS_OBJECT_SKELETON (object));
- g_object_unref (object);
- }
- /* Export all objects */
- g_dbus_object_manager_server_set_connection (manager, connection);
- emit_object_added((GDBusObjectManager*)manager);
+ /* Generic error reporter */
+ int rc = -1;
+
+ /* How long the LED needs to be in on and off state while blinking */
+ const char *on_duration = NULL;
+ const char *off_duration = NULL;
+ if(strcmp(blink_type, "setBlinkSlow") == 0)
+ {
+ //*Delay 900 millisec before 'on' and delay 900 millisec before off */
+ on_duration = "900";
+ off_duration = "900";
+ }
+ else if(strcmp(blink_type, "setBlinkFast") == 0)
+ {
+ /* Delay 200 millisec before 'on' and delay 200 millisec before off */
+ on_duration = "200";
+ off_duration = "200";
+ }
+ else
+ {
+ fprintf(stderr,"Invalid blink operation:[%s]\n",blink_type);
+ return rc;
+ }
+
+ rc = blink_led(led_name, on_duration, off_duration);
+
+ return rc;
}
-static void
-on_name_acquired (GDBusConnection *connection,
- const gchar *name,
- gpointer user_data)
+/*
+ * ---------------------------------------------------------------
+ * Gets the current value of passed in LED file
+ * Mainly used for reading 'brightness'
+ * NOTE : It is the responsibility of the caller to allocate
+ * sufficient space for buffer. This will read upto user supplied
+ * size -or- entire contents of file whichever is smaller
+ * ----------------------------------------------------------------
+ */
+int read_led(const char *name, const char *ctrl_file,
+ void *value, const size_t len)
{
+ /* Generic error reporter. */
+ int rc = -1;
+ int count = 0;
+
+ if(value == NULL || len <= 0)
+ {
+ fprintf(stderr, "Invalid buffer passed to LED read\n");
+ return rc;
+ }
+
+ /* To get /sys/class/leds/<name>/<control file> */
+ char led_path[128] = {0};
+
+ int led_len = 0;
+ led_len = snprintf(led_path, sizeof(led_path),
+ "/sys/class/leds/%s/%s",name, ctrl_file);
+ if(led_len >= sizeof(led_path))
+ {
+ fprintf(stderr, "Error. LED path is too long. :[%d]\n",led_len);
+ return rc;
+ }
+
+ FILE *fp = fopen(led_path,"rb");
+ if(fp == NULL)
+ {
+ perror("Error:");
+ fprintf(stderr,"Error opening:[%s]\n",led_path);
+ return rc;
+ }
+
+ char *sysfs_value = (char *)value;
+ while(!feof(fp) && (count < len))
+ {
+ sysfs_value[count++] = fgetc(fp);
+ }
+ sysfs_value[count]='\0';
+
+ fclose(fp);
+ return 0;
}
-static void
-on_name_lost (GDBusConnection *connection,
- const gchar *name,
- gpointer user_data)
+/*
+ * -----------------------------------------------
+ * Dbus Services offered by this LED controller
+ * -----------------------------------------------
+ */
+static const sd_bus_vtable led_control_vtable[] =
+{
+ SD_BUS_VTABLE_START(0),
+ SD_BUS_METHOD("setOn", "", "i", &led_function_router, SD_BUS_VTABLE_UNPRIVILEGED),
+ SD_BUS_METHOD("setOff", "", "i", &led_function_router, SD_BUS_VTABLE_UNPRIVILEGED),
+ SD_BUS_METHOD("setBlinkFast", "", "i", &led_function_router, SD_BUS_VTABLE_UNPRIVILEGED),
+ SD_BUS_METHOD("setBlinkSlow", "", "i", &led_function_router, SD_BUS_VTABLE_UNPRIVILEGED),
+ SD_BUS_METHOD("GetLedState", "", "is", &led_function_router, SD_BUS_VTABLE_UNPRIVILEGED),
+ SD_BUS_VTABLE_END,
+};
+
+/*
+ * ---------------------------------------------
+ * Interested in all files except standard ones
+ * ---------------------------------------------
+ */
+int led_select(const struct dirent *entry)
{
+ if( (strcmp(entry->d_name, ".") == 0) ||
+ (strcmp(entry->d_name, "..") == 0))
+ {
+ return 0;
+ }
+ return 1;
}
+/*
+ * ------------------------------------------------
+ * Called as part of setting up skeleton services.
+ * -----------------------------------------------
+ */
+int start_led_services()
+{
+ /* Generic error reporter. */
+ int rc = -1;
+ int num_leds = 0;
+ int count_leds = 0;
+
+ /* Bus and slot where we are offering the LED dbus service. */
+ sd_bus *bus_type = NULL;
+ sd_bus_slot *led_slot = NULL;
+
+ /* For walking '/sys/class/leds/' looking for names of LED.*/
+ struct dirent **led_list;
+
+ /* Get a hook onto system bus. */
+ rc = sd_bus_open_system(&bus_type);
+ if(rc < 0)
+ {
+ fprintf(stderr,"Error opening system bus.\n");
+ return rc;
+ }
+
+ count_leds = num_leds = scandir("/sys/class/leds/",
+ &led_list, led_select, alphasort);
+ if(num_leds <= 0)
+ {
+ fprintf(stderr,"No LEDs present in the system\n");
-gint
-main (gint argc, gchar *argv[])
+ sd_bus_slot_unref(led_slot);
+ sd_bus_unref(bus_type);
+ return rc;
+ }
+
+ /* Fully qualified Dbus object for a particular LED */
+ char led_object[128] = {0};
+ int len = 0;
+
+ /* For each led present, announce the service on dbus. */
+ while(num_leds--)
+ {
+ memset(led_object, 0x0, sizeof(led_object));
+
+ len = snprintf(led_object, sizeof(led_object), "%s%s",
+ "/org/openbmc/control/led/", led_list[num_leds]->d_name);
+
+ if(len >= sizeof(led_object))
+ {
+ fprintf(stderr, "Error. LED object is too long:[%d]\n",len);
+ rc = -1;
+ break;
+ }
+
+ /* Install the object */
+ rc = sd_bus_add_object_vtable(bus_type,
+ &led_slot,
+ led_object, /* object path */
+ "org.openbmc.Led", /* interface name */
+ led_control_vtable,
+ NULL);
+
+ if (rc < 0)
+ {
+ fprintf(stderr, "Failed to add object to dbus: %s\n", strerror(-rc));
+ break;
+ }
+ }
+
+ /* Done with all registration. */
+ while (count_leds > 0)
+ {
+ free(led_list[--count_leds]);
+ if(count_leds == 0)
+ {
+ free(led_list);
+ }
+ }
+
+ /* If we had success in adding the providers, request for a bus name. */
+ if(rc == 0)
+ {
+ /* Take one in OpenBmc */
+ rc = sd_bus_request_name(bus_type, "org.openbmc.control.led", 0);
+ if (rc < 0)
+ {
+ fprintf(stderr, "Failed to acquire service name: %s\n", strerror(-rc));
+ }
+ else
+ {
+ for (;;)
+ {
+ /* Process requests */
+ rc = sd_bus_process(bus_type, NULL);
+ if (rc < 0)
+ {
+ fprintf(stderr, "Failed to process bus: %s\n", strerror(-rc));
+ break;
+ }
+ if (rc > 0)
+ {
+ continue;
+ }
+
+ rc = sd_bus_wait(bus_type, (uint64_t) - 1);
+ if (rc < 0)
+ {
+ fprintf(stderr, "Failed to wait on bus: %s\n", strerror(-rc));
+ break;
+ }
+ }
+ }
+ }
+ sd_bus_slot_unref(led_slot);
+ sd_bus_unref(bus_type);
+
+ return rc;
+}
+
+int main(void)
{
- GMainLoop *loop;
- cmdline cmd;
- cmd.argc = argc;
- cmd.argv = argv;
-
- guint id;
- loop = g_main_loop_new (NULL, FALSE);
-
- id = g_bus_own_name (DBUS_TYPE,
- dbus_name,
- G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT |
- G_BUS_NAME_OWNER_FLAGS_REPLACE,
- on_bus_acquired,
- on_name_acquired,
- on_name_lost,
- &cmd,
- NULL);
-
- g_main_loop_run (loop);
-
- g_bus_unown_name (id);
- g_main_loop_unref (loop);
- return 0;
+ int rc = 0;
+
+ /* This call is not supposed to return. If it does, then an error */
+ rc = start_led_services();
+ if(rc < 0)
+ {
+ fprintf(stderr, "Error starting LED Services. Exiting");
+ }
+
+ return rc;
}
diff --git a/objects/led_controller_new.c b/objects/led_controller_new.c
deleted file mode 100755
index c8b3f92..0000000
--- a/objects/led_controller_new.c
+++ /dev/null
@@ -1,488 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <string.h>
-#include <dirent.h>
-#include <systemd/sd-bus.h>
-
-/*
- * These are control files that are present for each led under
- *'/sys/class/leds/<led_name>/' which are used to trigger action
- * on the respective leds by writing predefined data.
- */
-const char *power_ctrl = "brightness";
-const char *blink_ctrl = "trigger";
-const char *duty_on = "delay_on";
-const char *duty_off = "delay_off";
-
-/*
- * --------------------------------------------------
- * Given the dbus path, returns the name of the LED
- * --------------------------------------------------
- */
-char *get_led_name(const char *dbus_path)
-{
- char *led_name = NULL;
-
- /* Get the led name from /org/openbmc/control/led/<name> */
- led_name = strrchr(dbus_path, '/');
- if(led_name)
- {
- led_name++;
- }
-
- return led_name;
-}
-
-/*
- * -------------------------------------------------------------------------
- * Writes the 'on / off / blink' trigger to leds.
- * -------------------------------------------------------------------------
- */
-int write_to_led(const char *name, const char *ctrl_file, const char *value)
-{
- /* Generic error reporter. */
- int rc = -1;
-
- /* To get /sys/class/leds/<name>/<control file> */
- char led_path[128] = {0};
-
- int len = 0;
- len = snprintf(led_path, sizeof(led_path),
- "/sys/class/leds/%s/%s",name, ctrl_file);
- if(len >= sizeof(led_path))
- {
- fprintf(stderr, "Error. LED path is too long. :[%d]\n",len);
- return rc;
- }
-
- FILE *fp = fopen(led_path,"w");
- if(fp == NULL)
- {
- perror("Error:");
- fprintf(stderr,"Error opening:[%s]\n",led_path);
- return rc;
- }
-
- rc = fwrite(value, strlen(value), 1, fp);
- if(rc != 1)
- {
- perror("Error:");
- fprintf(stderr, "Error writing to :[%s]\n",led_path);
- }
-
- fclose(fp);
-
- /* When we get here, rc would be what it was from writing to the file */
- return (rc == 1) ? 0 : -1;
-}
-
-/*
- * ----------------------------------------------------------------
- * Router function for any LED operations that come via dbus
- *----------------------------------------------------------------
- */
-static int led_function_router(sd_bus_message *msg, void *user_data,
- sd_bus_error *ret_error)
-{
- /* Generic error reporter. */
- int rc = -1;
-
- /* Extract the led name from the full dbus path */
- const char *led_path = sd_bus_message_get_path(msg);
- if(led_path == NULL)
- {
- fprintf(stderr, "Error. LED path is empty");
- return sd_bus_reply_method_return(msg, "i", rc);
- }
-
- char *led_name = get_led_name(led_path);
- if(led_name == NULL)
- {
- fprintf(stderr, "Invalid LED name for path :[%s]\n",led_path);
- return sd_bus_reply_method_return(msg, "i", rc);
- }
-
- /* Now that we have the LED name, get the Operation. */
- const char *led_function = sd_bus_message_get_member(msg);
- if(led_function == NULL)
- {
- fprintf(stderr, "Null LED function specificed for : [%s]\n",led_name);
- return sd_bus_reply_method_return(msg, "i", rc);
- }
-
- /* Route the user action to appropriate handlers. */
- if( (strcmp(led_function, "setOn") == 0) ||
- (strcmp(led_function, "setOff") == 0))
- {
- rc = led_stable_state_function(led_name, led_function);
- return sd_bus_reply_method_return(msg, "i", rc);
- }
- else if( (strcmp(led_function, "setBlinkFast") == 0) ||
- (strcmp(led_function, "setBlinkSlow") == 0))
- {
- rc = led_default_blink(led_name, led_function);
- return sd_bus_reply_method_return(msg, "i", rc);
- }
- else if(strcmp(led_function, "GetLedState") == 0)
- {
- char value_str[10] = {0};
- const char *led_state = NULL;
-
- rc = read_led(led_name, power_ctrl, value_str, sizeof(value_str));
- if(rc >= 0)
- {
- /* LED is active low */
- led_state = strtoul(value_str, NULL, 0) ? "Off" : "On";
- }
- return sd_bus_reply_method_return(msg, "is", rc, led_state);
- }
- else
- {
- fprintf(stderr,"Invalid LED function:[%s]\n",led_function);
- }
-
- return sd_bus_reply_method_return(msg, "i", rc);
-}
-
-/*
- * --------------------------------------------------------------
- * Turn On or Turn Off the LED
- * --------------------------------------------------------------
- */
-int led_stable_state_function(char *led_name, char *led_function)
-{
- /* Generic error reporter. */
- int rc = -1;
-
- const char *value = NULL;
- if(strcmp(led_function, "setOn") == 0)
- {
- /* LED active low */
- value = "0";
- }
- else if(strcmp(led_function, "setOff") == 0)
- {
- value = "255";
- }
- else
- {
- fprintf(stderr,"Invalid LED stable state operation:[%s] \n",led_function);
- return rc;
- }
-
- /*
- * Before doing anything, need to turn off the blinking
- * if there is one in progress by writing 'none' to trigger
- */
- rc = write_to_led(led_name, blink_ctrl, "none");
- if(rc < 0)
- {
- fprintf(stderr,"Error disabling blink. Function:[%s]\n", led_function);
- return rc;
- }
-
- /*
- * Open the brightness file and write corresponding values.
- */
- rc = write_to_led(led_name, power_ctrl, value);
- if(rc < 0)
- {
- fprintf(stderr,"Error driving LED. Function:[%s]\n", led_function);
- }
-
- return rc;
-}
-
-//-----------------------------------------------------------------------------------
-// Given the on and off duration, applies the action on the specified LED.
-//-----------------------------------------------------------------------------------
-int blink_led(const char *led_name, const char *on_duration, const char *off_duration)
-{
- /* Generic error reporter */
- int rc = -1;
-
- /* Protocol demands that 'timer' be echoed to 'trigger' */
- rc = write_to_led(led_name, blink_ctrl, "timer");
- if(rc < 0)
- {
- fprintf(stderr,"Error writing timer to Led:[%s]\n", led_name);
- return rc;
- }
-
- /*
- * After writing 'timer to 'trigger', 2 new files get generated namely
- *'delay_on' and 'delay_off' which are telling the time duration for a
- * particular LED on and off.
- */
- rc = write_to_led(led_name, duty_on, on_duration);
- if(rc < 0)
- {
- fprintf(stderr,"Error writing [%s] to delay_on:[%s]\n",on_duration,led_name);
- return rc;
- }
-
- rc = write_to_led(led_name, duty_off, off_duration);
- if(rc < 0)
- {
- fprintf(stderr,"Error writing [%s] to delay_off:[%s]\n",off_duration,led_name);
- }
-
- return rc;
-}
-
-/*
- * ----------------------------------------------------
- * Default blink action on the LED.
- * ----------------------------------------------------
- */
-int led_default_blink(char *led_name, char *blink_type)
-{
- /* Generic error reporter */
- int rc = -1;
-
- /* How long the LED needs to be in on and off state while blinking */
- const char *on_duration = NULL;
- const char *off_duration = NULL;
- if(strcmp(blink_type, "setBlinkSlow") == 0)
- {
- //*Delay 900 millisec before 'on' and delay 900 millisec before off */
- on_duration = "900";
- off_duration = "900";
- }
- else if(strcmp(blink_type, "setBlinkFast") == 0)
- {
- /* Delay 200 millisec before 'on' and delay 200 millisec before off */
- on_duration = "200";
- off_duration = "200";
- }
- else
- {
- fprintf(stderr,"Invalid blink operation:[%s]\n",blink_type);
- return rc;
- }
-
- rc = blink_led(led_name, on_duration, off_duration);
-
- return rc;
-}
-
-/*
- * ---------------------------------------------------------------
- * Gets the current value of passed in LED file
- * Mainly used for reading 'brightness'
- * NOTE : It is the responsibility of the caller to allocate
- * sufficient space for buffer. This will read upto user supplied
- * size -or- entire contents of file whichever is smaller
- * ----------------------------------------------------------------
- */
-int read_led(const char *name, const char *ctrl_file,
- void *value, const size_t len)
-{
- /* Generic error reporter. */
- int rc = -1;
- int count = 0;
-
- if(value == NULL || len <= 0)
- {
- fprintf(stderr, "Invalid buffer passed to LED read\n");
- return rc;
- }
-
- /* To get /sys/class/leds/<name>/<control file> */
- char led_path[128] = {0};
-
- int led_len = 0;
- led_len = snprintf(led_path, sizeof(led_path),
- "/sys/class/leds/%s/%s",name, ctrl_file);
- if(led_len >= sizeof(led_path))
- {
- fprintf(stderr, "Error. LED path is too long. :[%d]\n",led_len);
- return rc;
- }
-
- FILE *fp = fopen(led_path,"rb");
- if(fp == NULL)
- {
- perror("Error:");
- fprintf(stderr,"Error opening:[%s]\n",led_path);
- return rc;
- }
-
- char *sysfs_value = (char *)value;
- while(!feof(fp) && (count < len))
- {
- sysfs_value[count++] = fgetc(fp);
- }
- sysfs_value[count]='\0';
-
- fclose(fp);
- return 0;
-}
-
-/*
- * -----------------------------------------------
- * Dbus Services offered by this LED controller
- * -----------------------------------------------
- */
-static const sd_bus_vtable led_control_vtable[] =
-{
- SD_BUS_VTABLE_START(0),
- SD_BUS_METHOD("setOn", "", "i", &led_function_router, SD_BUS_VTABLE_UNPRIVILEGED),
- SD_BUS_METHOD("setOff", "", "i", &led_function_router, SD_BUS_VTABLE_UNPRIVILEGED),
- SD_BUS_METHOD("setBlinkFast", "", "i", &led_function_router, SD_BUS_VTABLE_UNPRIVILEGED),
- SD_BUS_METHOD("setBlinkSlow", "", "i", &led_function_router, SD_BUS_VTABLE_UNPRIVILEGED),
- SD_BUS_METHOD("GetLedState", "", "is", &led_function_router, SD_BUS_VTABLE_UNPRIVILEGED),
- SD_BUS_VTABLE_END,
-};
-
-/*
- * ---------------------------------------------
- * Interested in all files except standard ones
- * ---------------------------------------------
- */
-int led_select(const struct dirent *entry)
-{
- if( (strcmp(entry->d_name, ".") == 0) ||
- (strcmp(entry->d_name, "..") == 0))
- {
- return 0;
- }
- return 1;
-}
-
-/*
- * ------------------------------------------------
- * Called as part of setting up skeleton services.
- * -----------------------------------------------
- */
-int start_led_services()
-{
- /* Generic error reporter. */
- int rc = -1;
- int num_leds = 0;
- int count_leds = 0;
-
- /* Bus and slot where we are offering the LED dbus service. */
- sd_bus *bus_type = NULL;
- sd_bus_slot *led_slot = NULL;
-
- /* For walking '/sys/class/leds/' looking for names of LED.*/
- struct dirent **led_list;
-
- /* Get a hook onto system bus. */
- rc = sd_bus_open_system(&bus_type);
- if(rc < 0)
- {
- fprintf(stderr,"Error opening system bus.\n");
- return rc;
- }
-
- count_leds = num_leds = scandir("/sys/class/leds/",
- &led_list, led_select, alphasort);
- if(num_leds <= 0)
- {
- fprintf(stderr,"No LEDs present in the system\n");
-
- sd_bus_slot_unref(led_slot);
- sd_bus_unref(bus_type);
- return rc;
- }
-
- /* Fully qualified Dbus object for a particular LED */
- char led_object[128] = {0};
- int len = 0;
-
- /* For each led present, announce the service on dbus. */
- while(num_leds--)
- {
- memset(led_object, 0x0, sizeof(led_object));
-
- len = snprintf(led_object, sizeof(led_object), "%s%s",
- "/org/openbmc/controller/led/", led_list[num_leds]->d_name);
-
- if(len >= sizeof(led_object))
- {
- fprintf(stderr, "Error. LED object is too long:[%d]\n",len);
- rc = -1;
- break;
- }
-
- /* Install the object */
- rc = sd_bus_add_object_vtable(bus_type,
- &led_slot,
- led_object, /* object path */
- "org.openbmc.controller.led", /* interface name */
- led_control_vtable,
- NULL);
-
- if (rc < 0)
- {
- fprintf(stderr, "Failed to add object to dbus: %s\n", strerror(-rc));
- break;
- }
- }
-
- /* Done with all registration. */
- while (count_leds > 0)
- {
- free(led_list[--count_leds]);
- if(count_leds == 0)
- {
- free(led_list);
- }
- }
-
- /* If we had success in adding the providers, request for a bus name. */
- if(rc == 0)
- {
- /* Take one in OpenBmc */
- rc = sd_bus_request_name(bus_type, "org.openbmc.controller.led", 0);
- if (rc < 0)
- {
- fprintf(stderr, "Failed to acquire service name: %s\n", strerror(-rc));
- }
- else
- {
- for (;;)
- {
- /* Process requests */
- rc = sd_bus_process(bus_type, NULL);
- if (rc < 0)
- {
- fprintf(stderr, "Failed to process bus: %s\n", strerror(-rc));
- break;
- }
- if (rc > 0)
- {
- continue;
- }
-
- rc = sd_bus_wait(bus_type, (uint64_t) - 1);
- if (rc < 0)
- {
- fprintf(stderr, "Failed to wait on bus: %s\n", strerror(-rc));
- break;
- }
- }
- }
- }
- sd_bus_slot_unref(led_slot);
- sd_bus_unref(bus_type);
-
- return rc;
-}
-
-int main(void)
-{
- int rc = 0;
-
- /* This call is not supposed to return. If it does, then an error */
- rc = start_led_services();
- if(rc < 0)
- {
- fprintf(stderr, "Error starting LED Services. Exiting");
- }
-
- return rc;
-}
--
2.7.1
More information about the openbmc
mailing list