[PATCH phosphor-host-ipmid v2] Write FRU cmd handler for STORAGE NetFn
OpenBMC Patches
patches at stwcx.xyz
Fri Oct 30 05:25:21 AEDT 2015
From: vishwabmc <vishwanath at in.ibm.com>
---
Makefile | 29 +--
storagehandler.C | 584 ++++++++++++++++++++++++++++++++++++++++++++++++++-----
storagehandler.h | 44 +++++
3 files changed, 595 insertions(+), 62 deletions(-)
diff --git a/Makefile b/Makefile
index a91328e..9a11b5c 100644
--- a/Makefile
+++ b/Makefile
@@ -7,14 +7,11 @@ TESTADDSEL = testaddsel
DAEMON = ipmid
DAEMON_OBJ = $(DAEMON).o
-
LIB_APP_OBJ = apphandler.o \
sensorhandler.o \
- storagehandler.o \
dcmihandler.o \
ipmisensor.o \
- storageaddsel.o \
-
+ storageaddsel.o
TESTADDSEL_OBJ = $(TESTADDSEL).o \
storageaddsel.o
@@ -22,11 +19,19 @@ TESTADDSEL_OBJ = $(TESTADDSEL).o \
TESTER_OBJ = ipmisensor.o \
testit.o
-LIB_APP = libapphandler.so
-INSTALLED_LIBS += $(LIB_APP)
+LIB_STRG_OBJ = storagehandler.o \
+ storageaddsel.o
+
+TESTER_OBJ = ipmisensor.o \
+ testit.o
+
+LIB_APP = libapphandler.so
+LIB_STRG = libstoragehandler.so
+
+INSTALLED_LIBS += $(LIB_APP) $(LIB_STRG)
INSTALLED_HEADERS = ipmid-api.h
-INC_FLAG += $(shell pkg-config --cflags --libs libsystemd) -I. -O2
+INC_FLAG += $(shell pkg-config --cflags --libs libsystemd) -I. -O2
LIB_FLAG += $(shell pkg-config --libs libsystemd) -rdynamic
IPMID_PATH ?= -DHOST_IPMI_LIB_PATH=\"/usr/lib/host-ipmid/\"
@@ -35,13 +40,16 @@ SBINDIR ?= /usr/sbin
INCLUDEDIR ?= /usr/include
LIBDIR ?= /usr/lib
-all: $(DAEMON) $(LIB_APP) $(TESTER)
+all: $(DAEMON) $(LIB_APP) $(LIB_STRG) $(TESTER)
%.o: %.C
- $(CXX) -std=c++14 -fpic -c $< $(CXXFLAGS) $(INC_FLAG) $(IPMID_PATH) -o $@
+ $(CXX) --std=gnu++14 -fpic -c $< $(CXXFLAGS) $(INC_FLAG) $(IPMID_PATH) -o $@
$(LIB_APP): $(LIB_APP_OBJ)
- $(CXX) $^ -shared $(LDFLAGS) $(LIB_FLAG) -o $@
+ $(CXX) $^ -shared $(LDFLAGS) $(LIB_FLAG) -o $@ -ldl
+
+$(LIB_STRG): $(LIB_STRG_OBJ)
+ $(CXX) $^ -shared $(LDFLAGS) $(LIB_FLAG) -o $@ -ldl -lifp
$(DAEMON): $(DAEMON_OBJ)
$(CXX) $^ $(LDFLAGS) $(LIB_FLAG) -o $@ -ldl
@@ -62,4 +70,3 @@ install:
install -m 0755 $(INSTALLED_LIBS) $(DESTDIR)$(LIBDIR)/host-ipmid
install -m 0755 -d $(DESTDIR)$(INCLUDEDIR)/host-ipmid
install -m 0644 $(INSTALLED_HEADERS) $(DESTDIR)$(INCLUDEDIR)/host-ipmid
-
diff --git a/storagehandler.C b/storagehandler.C
index dc0217e..629150c 100644
--- a/storagehandler.C
+++ b/storagehandler.C
@@ -1,21 +1,32 @@
#include <stdio.h>
#include <string.h>
-#include <stdint.h>
#include <time.h>
#include <arpa/inet.h>
-
#include "storagehandler.h"
#include "storageaddsel.h"
#include "ipmid-api.h"
+#include <systemd/sd-bus.h>
+#include <vector>
+#include <stdlib.h>
+#include <dlfcn.h>
+#include <errno.h>
+#include <frup.h>
void register_netfn_storage_functions() __attribute__((constructor));
-
unsigned int g_sel_time = 0xFFFFFFFF;
unsigned short g_sel_reserve = 0x1;
-ipmi_ret_t ipmi_storage_wildcard(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
- ipmi_request_t request, ipmi_response_t response,
+// Needed to be passed into fru parser alorithm
+typedef std::vector<fru_area_t> fru_area_vec_t;
+
+// OpenBMC System Manager dbus framework
+const char *bus_name = "org.openbmc.managers.System";
+const char *object_name = "/org/openbmc/managers/System";
+const char *intf_name = "org.openbmc.managers.System";
+
+ipmi_ret_t ipmi_storage_wildcard(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
+ ipmi_request_t request, ipmi_response_t response,
ipmi_data_len_t data_len, ipmi_context_t context)
{
printf("Handling STORAGE WILDCARD Netfn:[0x%X], Cmd:[0x%X]\n",netfn, cmd);
@@ -64,69 +75,542 @@ ipmi_ret_t ipmi_storage_set_sel_time(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
return rc;
}
-struct write_fru_data_t {
- uint8_t frunum;
- uint8_t offsetls;
- uint8_t offsetms;
- uint8_t data;
-} __attribute__ ((packed)) ;
+//------------------------------------------------
+// Takes the pointer to stream of bytes and length
+// returns the 8 bit checksum per IPMI spec.
+//-------------------------------------------------
+unsigned char calculate_crc(unsigned char *data, int len)
+{
+ char crc = 0;
+ int byte = 0;
-ipmi_ret_t ipmi_storage_write_fru_data(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
- ipmi_request_t request, ipmi_response_t response,
- ipmi_data_len_t data_len, ipmi_context_t context)
+ for(byte = 0; byte < len; byte++)
+ {
+ crc += *data++;
+ }
+
+ return(-crc);
+}
+
+//---------------------------------------------------------------------
+// Accepts a fru area offset in commom hdr and tells which area it is.
+//---------------------------------------------------------------------
+uint8_t get_fru_area_type(uint8_t area_offset)
{
- write_fru_data_t *reqptr = (write_fru_data_t*) request;
- FILE *fp;
- char string[16];
- short offset = 0;
- uint16_t rlen;
- ipmi_ret_t rc = IPMI_CC_OK;
- char iocmd[4];
+ ipmi_fru_area_type type = IPMI_FRU_AREA_TYPE_MAX;
- sprintf(string, "%s%02x", "/tmp/fru", reqptr->frunum);
+ switch(area_offset)
+ {
+ case IPMI_FRU_INTERNAL_OFFSET:
+ type = IPMI_FRU_AREA_INTERNAL_USE;
+ break;
- offset = ((uint16_t)reqptr->offsetms) << 8 | reqptr->offsetls;
+ case IPMI_FRU_CHASSIS_OFFSET:
+ type = IPMI_FRU_AREA_CHASSIS_INFO;
+ break;
+ case IPMI_FRU_BOARD_OFFSET:
+ type = IPMI_FRU_AREA_BOARD_INFO;
+ break;
- // Length is the number of request bytes minus the header itself.
- // The header contains an extra byte to indicate the start of
- // the data (so didn't need to worry about word/byte boundaries)
- // hence the -1...
- rlen = ((uint16_t)*data_len) - (sizeof(write_fru_data_t)-1);
+ case IPMI_FRU_PRODUCT_OFFSET:
+ type = IPMI_FRU_AREA_PRODUCT_INFO;
+ break;
+ case IPMI_FRU_MULTI_OFFSET:
+ type = IPMI_FRU_AREA_MULTI_RECORD;
+ break;
- printf("IPMI WRITE-FRU-DATA for %s Offset = %d Length = %d\n",
- string, offset, rlen);
+ default:
+ type = IPMI_FRU_AREA_TYPE_MAX;
+ }
+ return type;
+}
- // I was thinking "ab+" but it appears it doesn't
- // do what fseek asks. Modify to rb+ and fseek
- // works great...
- if (offset == 0) {
- strcpy(iocmd, "wb");
- } else {
- strcpy(iocmd, "rb+");
+//------------------------------------------------------------------------
+// Takes FRU data, invokes Parser for each fru record area and updates
+// Inventory
+//------------------------------------------------------------------------
+int ipmi_update_inventory(const uint8_t fruid, const uint8_t *fru_data,
+ fru_area_vec_t & area_vec)
+{
+ // Now, use this fru dictionary object and connect with FRU Inventory Dbus
+ // and update the data for this FRU ID.
+ int rc = 0;
+
+ // Dictionary object to hold Name:Value pair
+ sd_bus_message *fru_dict = NULL;
+
+ // SD Bus error report mechanism.
+ sd_bus_error bus_error = SD_BUS_ERROR_NULL;
+
+ // Gets a hook onto either a SYSTEM or SESSION bus
+ sd_bus *bus_type = NULL;
+
+ // Req message contains the specifics about which method etc that we want to
+ // access on which bus, object
+ sd_bus_message *response = NULL;
+
+ rc = sd_bus_open_system(&bus_type);
+ if(rc < 0)
+ {
+ fprintf(stderr,"ERROR: Getting a SYSTEM bus hook\n");
+ return -1;
}
- if ((fp = fopen(string, iocmd)) != NULL) {
- fseek(fp, offset, SEEK_SET);
- fwrite(&reqptr->data,rlen,1,fp);
- fclose(fp);
- } else {
- fprintf(stderr, "Error trying to write to fru file %s\n",string);
- ipmi_ret_t rc = IPMI_CC_INVALID;
+ // For each FRU area, extract the needed data , get it parsed and update
+ // the Inventory.
+ for(auto& iter : area_vec)
+ {
+ uint8_t area_type = (iter).type;
+
+ uint8_t area_data[(iter).len];
+ memset(area_data, 0x0, sizeof(area_data));
+
+ // Grab area specific data
+ memmove(area_data, (iter).offset, (iter).len);
+
+ // Need this to get respective DBUS objects
+ const char *area_name = NULL;
+
+ if(area_type == IPMI_FRU_AREA_CHASSIS_INFO)
+ {
+ area_name = "CHASSIS_";
+ }
+ else if(area_type == IPMI_FRU_AREA_BOARD_INFO)
+ {
+ area_name = "BOARD_";
+ }
+ else if(area_type == IPMI_FRU_AREA_PRODUCT_INFO)
+ {
+ area_name = "PRODUCT_";
+ }
+ else
+ {
+ fprintf(stderr, "ERROR: Invalid Area type :[%d]",area_type);
+ break;
+ }
+
+ // What we need is BOARD_1, PRODUCT_1, CHASSIS_1 etc..
+ char fru_area_name[16] = {0};
+ sprintf(fru_area_name,"%s%d",area_name, fruid);
+
+#ifdef __IPMI_DEBUG__
+ printf("Updating Inventory with :[%s]\n",fru_area_name);
+#endif
+ // Each area needs a clean set.
+ sd_bus_error_free(&bus_error);
+ sd_bus_message_unref(response);
+ sd_bus_message_unref(fru_dict);
+
+ // We want to call a method "getObjectFromId" on System Bus that is
+ // made available over OpenBmc system services.
+ rc = sd_bus_call_method(bus_type, // On the System Bus
+ bus_name, // Service to contact
+ object_name, // Object path
+ intf_name, // Interface name
+ "getObjectFromId", // Method to be called
+ &bus_error, // object to return error
+ &response, // Response message on success
+ "ss", // input message (string,byte)
+ "FRU_STR", // First argument to getObjectFromId
+ fru_area_name); // Second Argument
+
+ if(rc < 0)
+ {
+ fprintf(stderr, "Failed to issue method call: %s\n", bus_error.message);
+ break;
+ }
+
+ // Method getObjectFromId returns 3 parameters and all are strings, namely
+ // bus_name , object_path and interface name for accessing that particular
+ // FRU over Inventory SDBUS manager. 'sss' here mentions that format.
+ char *inv_bus_name, *inv_obj_path, *inv_intf_name;
+ rc = sd_bus_message_read(response, "(sss)", &inv_bus_name, &inv_obj_path, &inv_intf_name);
+ if(rc < 0)
+ {
+ fprintf(stderr, "Failed to parse response message:[%s]\n", strerror(-rc));
+ break;
+ }
+
+#ifdef __IPMI_DEBUG__
+ printf("fru_area=[%s], inv_bus_name=[%s], inv_obj_path=[%s],inv_intf_name=[%s]\n",
+ fru_area_name, inv_bus_name, inv_obj_path, inv_intf_name);
+#endif
+
+ // Constructor to allow further initializations and customization.
+ rc = sd_bus_message_new_method_call(bus_type,
+ &fru_dict,
+ inv_bus_name,
+ inv_obj_path,
+ inv_intf_name,
+ "update");
+ if(rc < 0)
+ {
+ fprintf(stderr,"ERROR: creating a update method call\n");
+ break;
+ }
+
+ // A Dictionary ({}) having (string, variant)
+ rc = sd_bus_message_open_container(fru_dict, 'a', "{sv}");
+ if(rc < 0)
+ {
+ fprintf(stderr,"ERROR:[%d] creating a dict container:\n",errno);
+ break;
+ }
+
+ // Fill the container with information
+ rc = parse_fru_area((iter).type, (void *)area_data, (iter).len, fru_dict);
+ if(rc < 0)
+ {
+ fprintf(stderr,"ERROR parsing FRU records\n");
+ break;
+ }
+
+ sd_bus_message_close_container(fru_dict);
+
+ // Now, Make the actual call to update the FRU inventory database with the
+ // dictionary given by FRU Parser. There is no response message expected for
+ // this.
+ rc = sd_bus_call(bus_type, // On the System Bus
+ fru_dict, // With the Name:value dictionary array
+ 0, //
+ &bus_error, // Object to return error.
+ &response); // Response message if any.
+
+ if(rc < 0)
+ {
+ fprintf(stderr, "ERROR:[%s] updating FRU inventory for ID:[0x%X]\n",
+ bus_error.message, fruid);
+ }
+ else
+ {
+ printf("SUCCESS: Updated:[%s] successfully\n",fru_area_name);
+ }
+ } // END walking the vector of areas and updating
+
+ sd_bus_error_free(&bus_error);
+ sd_bus_message_unref(response);
+ sd_bus_message_unref(fru_dict);
+ sd_bus_unref(bus_type);
+
+ return rc;
+}
+
+//-------------------------------------------------------------------------
+// Validates the CRC and if found good, calls fru areas parser and calls
+// Inventory Dbus with the dictionary of Name:Value for updating.
+//-------------------------------------------------------------------------
+int ipmi_validate_and_update_inventory(const uint8_t fruid, const uint8_t *fru_data)
+{
+ // Used for generic checksum calculation
+ uint8_t checksum = 0;
+
+ // This can point to any FRU entry.
+ uint8_t fru_entry;
+
+ // A generic offset locator for any FRU record.
+ uint8_t area_offset = 0;
+
+ // First 2 bytes in the record.
+ uint8_t fru_area_hdr[2] = {0};
+
+ // To hold info about individual FRU record areas.
+ fru_area_t fru_area;
+
+ // For parsing and updating Inventory.
+ fru_area_vec_t fru_area_vec;
+
+ int rc = 0;
+
+ uint8_t common_hdr[sizeof(struct common_header)] = {0};
+ memset(common_hdr, 0x0, sizeof(common_hdr));
+
+ // Copy first 8 bytes to verify common header
+ memcpy(common_hdr, fru_data, sizeof(common_hdr));
+
+ // Validate for first byte to always have a value of [1]
+ if(common_hdr[0] != IPMI_FRU_HDR_BYTE_ZERO)
+ {
+ fprintf(stderr, "ERROR: Common Header entry_1:[0x%X] Invalid.\n",common_hdr[0]);
+ return -1;
+ }
+ else
+ {
+ printf("SUCCESS: Validated [0x%X] in common header\n",common_hdr[0]);
}
+ // Validate the header checskum that is at last byte ( Offset: 7 )
+ checksum = calculate_crc(common_hdr, sizeof(common_hdr)-1);
+ if(checksum != common_hdr[IPMI_FRU_HDR_CRC_OFFSET])
+ {
+#ifdef __IPMI__DEBUG__
+ fprintf(stderr, "ERROR: Common Header checksum mismatch."
+ " Calculated:[0x%X], Embedded:[0x%X]\n",
+ checksum, common_hdr[IPMI_FRU_HDR_CRC_OFFSET]);
+#endif
+ return -1;
+ }
+ else
+ {
+ printf("SUCCESS: Common Header checksum MATCH:[0x%X]\n",checksum);
+ }
- // TODO : Here is where some validation code could determine if the
- // fru data is a legitimate FRU record (not just a partial). Once
- // the record is valid the code should call a parser routine to call
- // the various methods updating interesting properties. Perhaps
- // thinigs like Model#, Serial#, DIMM Size, etc
+ //-------------------------------------------
+ // TODO: Add support for Multi Record later
+ //-------------------------------------------
+
+ // Now start walking the common_hdr array that has offsets into other FRU
+ // record areas and validate those. Starting with second entry since the
+ // first one is always a [0x01]
+ for(fru_entry = IPMI_FRU_INTERNAL_OFFSET; fru_entry < (sizeof(struct common_header) -2); fru_entry++)
+ {
+ // Offset is 'value given in' internal_offset * 8 from the START of
+ // common header. So an an example, 01 00 00 00 01 00 00 fe has
+ // product area set at the offset 01 * 8 --> 8 bytes from the START of
+ // common header. That means, soon after the header checksum.
+ area_offset = common_hdr[fru_entry] * IPMI_EIGHT_BYTES;
+
+ if(area_offset)
+ {
+ memset((void *)&fru_area, 0x0, sizeof(fru_area_t));
+
+ // Enumerated FRU area.
+ fru_area.type = get_fru_area_type(fru_entry);
+
+ // From start of fru header + record offset, copy 2 bytes.
+ fru_area.offset = &((uint8_t *)fru_data)[area_offset];
+ memcpy(fru_area_hdr, fru_area.offset, sizeof(fru_area_hdr));
+
+ // A NON zero value means that the vpd packet has the data for that
+ // area. err if first element in the record header is _not_ a [0x01].
+ if(fru_area_hdr[0] != IPMI_FRU_HDR_BYTE_ZERO)
+ {
+ fprintf(stderr, "ERROR: Unexpected :[0x%X] found at Record header\n",
+ fru_area_hdr[0]);
+
+ // This vector by now may have had some entries. Since this is a
+ // failure now, clear the state data.
+ fru_area_vec.clear();
+ return -1;
+ }
+ else
+ {
+ printf("SUCCESS: Validated [0x%X] in fru record:[%d] header\n",
+ fru_area_hdr[0],fru_entry);
+ }
+
+ // Read Length bytes ( makes a complete record read now )
+ fru_area.len = fru_area_hdr[1] * IPMI_EIGHT_BYTES;
+#ifdef __IPMI_DEBUG__
+ printf("AREA NO[%d], SIZE = [%d]\n",fru_entry, fru_area.len);
+#endif
+ uint8_t fru_area_data[fru_area.len];
+ memset(fru_area_data, 0x0, sizeof(fru_area_data));
+
+ memmove(fru_area_data, fru_area.offset, sizeof(fru_area_data));
+
+ // Calculate checksum (from offset -> (Length-1)).
+ // All the bytes except the last byte( which is CRC :) ) will
+ // participate in calculating the checksum.
+ checksum = calculate_crc(fru_area_data, sizeof(fru_area_data)-1);
+
+ // Verify the embedded checksum in last byte with calculated checksum
+ // record_len -1 since length is some N but numbering is 0..N-1
+ if(checksum != fru_area_data[fru_area.len-1])
+ {
+#ifdef __IPMI_DEBUG__
+ fprintf(stderr, "ERROR: FRU Header checksum mismatch. "
+ " Calculated:[0x%X], Embedded:[0x%X]\n",
+ checksum, fru_area_data[fru_area.len - 1]);
+#endif
+ // This vector by now may have had some entries. Since this is a
+ // failure now, clear the state data.
+ fru_area_vec.clear();
+ return -1;
+ }
+ else
+ {
+ printf("SUCCESS: FRU Header checksum MATCH:[0x%X]\n",checksum);
+ }
+
+ // Everything is rihgt about this particular FRU record,
+ fru_area_vec.push_back(fru_area);
+
+ // Update the internal structure with info about this entry that is
+ // needed while handling each areas.
+ } // If the packet has data for a particular data record.
+ } // End walking all the fru records.
+
+ // If we reach here, then we have validated the crc for all the records and
+ // time to call FRU area parser to get a Name:Value pair dictionary.
+ // This will start iterating all over again on the buffer -BUT- now with the
+ // job of taking each areas, getting it parsed and then updating the
+ // DBUS.
+
+ if(!(fru_area_vec.empty()))
+ {
+ rc = ipmi_update_inventory(fruid, fru_data, fru_area_vec);
+ }
+
+ // We are done with this FRU write packet.
+ fru_area_vec.clear();
+ return rc;
+}
+
+///-----------------------------------------------------
+// Accepts the filename and validates per IPMI FRU spec
+//----------------------------------------------------
+int ipmi_validate_fru_area(const uint8_t fruid, const char *fru_file_name)
+{
+ int file_size = 0;
+ uint8_t *fru_data = NULL;
+ int bytes_read = 0;
+ int rc = 0;
+
+ FILE *fru_file = fopen(fru_file_name,"rb");
+ if(fru_file == NULL)
+ {
+ fprintf(stderr, "ERROR: opening:[%s]\n",fru_file_name);
+ perror("Error:");
+ return -1;
+ }
+
+ // Get the size of the file to allocate buffer to hold the entire contents.
+ if(fseek(fru_file, 0, SEEK_END))
+ {
+ perror("Error:");
+ fclose(fru_file);
+ return -1;
+ }
+
+ file_size = ftell(fru_file);
+ fru_data = (uint8_t *)malloc(file_size);
+
+ // Read entire file contents to the internal buffer
+ if(fseek(fru_file, 0, SEEK_SET))
+ {
+ perror("Error:");
+ fclose(fru_file);
+ return -1;
+ }
+
+ bytes_read = fread(fru_data, file_size, 1, fru_file);
+ if(bytes_read != 1)
+ {
+ fprintf(stderr, "ERROR reading common header. Bytes read=:[%d]\n",bytes_read);
+ perror("Error:");
+ fclose(fru_file);
+ return -1;
+ }
+ fclose(fru_file);
+
+ rc = ipmi_validate_and_update_inventory(fruid, fru_data);
+ if(rc == -1)
+ {
+ printf("ERROR: Validation failed for:[%d]\n",fruid);
+ }
+ else
+ {
+ printf("SUCCESS: Validated:[%s]\n",fru_file_name);
+ }
+
+ if(fru_data)
+ {
+ free(fru_data);
+ fru_data = NULL;
+ }
+
+ return rc;
+}
+///-------------------------------------------------------
+// Called by IPMI netfn router for write fru data command
+//--------------------------------------------------------
+ipmi_ret_t ipmi_storage_write_fru_data(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
+ ipmi_request_t request, ipmi_response_t response,
+ ipmi_data_len_t data_len, ipmi_context_t context)
+{
+ FILE *fp = NULL;
+ char fru_file_name[16] = {0};
+ uint8_t offset = 0;
+ uint16_t len = 0;
+ ipmi_ret_t rc = IPMI_CC_INVALID;
+ int validate_rc = 0;
+ const char *mode = NULL;
+
+ // From the payload, extract the header that has fruid and the offsets
+ write_fru_data_t *reqptr = (write_fru_data_t*)request;
+
+ // There is no response data for this command.
*data_len = 0;
+ // Maintaining a temporary file to pump the data
+ sprintf(fru_file_name, "%s%02x", "/tmp/ipmifru", reqptr->frunum);
+
+ offset = ((uint16_t)reqptr->offsetms) << 8 | reqptr->offsetls;
+
+ // Length is the number of request bytes minus the header itself.
+ // The header contains an extra byte to indicate the start of
+ // the data (so didn't need to worry about word/byte boundaries)
+ // hence the -1...
+ len = ((uint16_t)*data_len) - (sizeof(write_fru_data_t)-1);
+
+#ifdef __IPMI__DEBUG__
+ printf("IPMI WRITE-FRU-DATA for [%s] Offset = [%d] Length = [%d]\n",
+ fru_file_name, offset, len);
+#endif
+
+ // offset would be zero if the cmd payload is targeting a new fru
+ if (offset == 0)
+ {
+ mode = "wb";
+ }
+ else
+ {
+ // offset would be non-zero if the cmd payload is continued for prev
+ // fru
+ mode = "rb+";
+ }
+
+ if ((fp = fopen(fru_file_name, mode)) != NULL)
+ {
+ if(fseek(fp, offset, SEEK_SET))
+ {
+ perror("Error:");
+ fclose(fp);
+ return rc;
+ }
+
+ if(fwrite(&reqptr->data, len, 1, fp) != 1)
+ {
+ perror("Error:");
+ fclose(fp);
+ return rc;
+ }
+
+ fclose(fp);
+ }
+ else
+ {
+ fprintf(stderr, "Error trying to write to fru file %s\n",fru_file_name);
+ return rc;
+ }
+
+ // We received some bytes. It may be full or partial. Run a validator.
+ validate_rc = ipmi_validate_fru_area(reqptr->frunum, fru_file_name);
+ if(validate_rc != -1)
+ {
+ // Success validating _and_ updating the Inventory. We no longer need
+ // this file.
+ remove(fru_file_name);
+ }
+
+ // convert the rc per ipmi spec
+ rc = (validate_rc != -1) ? IPMI_CC_OK : IPMI_CC_INVALID;
+
return rc;
}
@@ -198,8 +682,6 @@ ipmi_ret_t ipmi_storage_add_sel(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
return rc;
}
-
-
void register_netfn_storage_functions()
{
printf("Registering NetFn:[0x%X], Cmd:[0x%X]\n",NETFUN_STORAGE, IPMI_CMD_WILDCARD);
diff --git a/storagehandler.h b/storagehandler.h
index 7abefd5..02965bd 100644
--- a/storagehandler.h
+++ b/storagehandler.h
@@ -1,6 +1,9 @@
#ifndef __HOST_IPMI_STORAGE_HANDLER_H__
#define __HOST_IPMI_STORAGE_HANDLER_H__
+#include <stdint.h>
+#include <stddef.h>
+
// IPMI commands for Storage net functions.
enum ipmi_netfn_storage_cmds
{
@@ -26,4 +29,45 @@ struct ipmi_add_sel_request_t {
uint8_t eventdir;
uint8_t eventdata[3];
};
+
+// Format of write fru data command
+struct write_fru_data_t
+{
+ uint8_t frunum;
+ uint8_t offsetls;
+ uint8_t offsetms;
+ uint8_t data;
+}__attribute__ ((packed));
+
+// Per IPMI v2.0 FRU specification
+struct common_header
+{
+ uint8_t fixed;
+ uint8_t internal_offset;
+ uint8_t chassis_offset;
+ uint8_t board_offset;
+ uint8_t product_offset;
+ uint8_t multi_offset;
+ uint8_t pad;
+ uint8_t crc;
+}__attribute__((packed));
+
+// Contains key info about a particular area.
+typedef struct
+{
+ uint8_t type;
+ uint8_t *offset;
+ size_t len;
+}__attribute__((packed)) fru_area_t;
+
+// first byte in header is 1h per IPMI V2 spec.
+#define IPMI_FRU_HDR_BYTE_ZERO 1
+#define IPMI_FRU_INTERNAL_OFFSET offsetof(struct common_header, internal_offset)
+#define IPMI_FRU_CHASSIS_OFFSET offsetof(struct common_header, chassis_offset)
+#define IPMI_FRU_BOARD_OFFSET offsetof(struct common_header, board_offset)
+#define IPMI_FRU_PRODUCT_OFFSET offsetof(struct common_header, product_offset)
+#define IPMI_FRU_MULTI_OFFSET offsetof(struct common_header, multi_offset)
+#define IPMI_FRU_HDR_CRC_OFFSET offsetof(struct common_header, crc)
+#define IPMI_EIGHT_BYTES 8
+
#endif
--
2.6.0
More information about the openbmc
mailing list