[PATCH phosphor-host-ipmid v2 20/20] Refactored fru validator to use sd_bus
OpenBMC Patches
patches at stwcx.xyz
Wed Oct 21 23:48:21 AEDT 2015
From: vishwabmc <vishwanath at in.ibm.com>
---
fruvalidator.C | 252 ----------------------
sd_bus_fruvalidator.C | 568 ++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 568 insertions(+), 252 deletions(-)
delete mode 100644 fruvalidator.C
create mode 100644 sd_bus_fruvalidator.C
diff --git a/fruvalidator.C b/fruvalidator.C
deleted file mode 100644
index 5e2ffaf..0000000
--- a/fruvalidator.C
+++ /dev/null
@@ -1,252 +0,0 @@
-#include <stdio.h>
-#include <string.h>
-#include <sys/stat.h>
-
-typedef unsigned char uint8_t;
-
-/*
- * --- For Reference.----
-typedef struct
-{
- uint8_t fixed;
- uint8_t internal_offset;
- uint8_t chassis_offset;
- uint8_t board_offset;
- uint8_t product_offset;
- uint8_t multi_offset;
- uint8_t pad;
- uint8_t crc;
-}common_header_t;
-*/
-
-#define HDR_BYTE_ZERO 1
-#define INTERNAL_OFFSET 1
-#define HDR_CRC_OFFSET 7
-#define COMMON_HDR_SIZE 8
-
-#define RECORD_NOT_PRESENT 0
-#define EIGHT_BYTES 8
-
-uint8_t common_hdr[COMMON_HDR_SIZE] = {0};
-
-//------------------------------------------------
-// Takes the pointer to stream of bytes and length
-// returns the 8 bit checksum per IPMI spec.
-//--------------------------------------------------
-unsigned char calculate_checksum(unsigned char *ptr, int len)
-{
- // REFER :: http://coreipm.googlecode.com/svn-history/r40/trunk/coreipm/ipmi_pkt.c
- char checksum = 0;
- int byte = 0;
-
- for(byte = 0; byte < len; byte++)
- {
- checksum += *ptr++;
- }
-
- return( -checksum );
-}
-
-//---------------
-// Display Usage
-//---------------
-void usage(char *binary)
-{
- printf("Usage: %s <valid binary ipmi fru file>\n", binary);
- return;
-}
-
-//-----------------------------------------------------
-// Accepts the filename and validated per IPMI FRU spec
-//------------------------------------------------------
-bool validate_fru_record(char *fru_file_name)
-{
- // Used for generic checksum calculation
- uint8_t checksum = 0;
-
- // This can point to
- uint8_t fru_section;
-
- // A generic offset locator for any FRU record.
- uint8_t record_offset = 0;
-
- // Number of bytes read from FRU file.
- size_t bytes_read = 0;
-
- // First 2 bytes in the record.
- uint8_t fru_record_hdr[2] = {0};
-
- //common_header_t com_hdr;
- memset(common_hdr, 0x0, sizeof(common_hdr));
-
- // For now, this is user supplied in CLI. But this will be a parameter from
- // fru handler
- FILE *fru_file = fopen(fru_file_name,"rb");
- if(fru_file == NULL)
- {
- fprintf(stderr, "ERROR: opening:[%s]\n",fru_file_name);
- return false;
- }
-
- // Read first 8 bytes into common_header so we know the offsets and hdr
- // checksum.
- fseek(fru_file, 0, SEEK_SET);
- bytes_read = fread(common_hdr, sizeof(common_hdr), 1, fru_file);
- if(bytes_read != 1)
- {
- fprintf(stderr, "ERROR reading common header. Bytes read=:[%ld]\n",bytes_read);
- return false;
- }
-
- // 1: Validate for first byte to always have a value of [1]
- if(common_hdr[0] != HDR_BYTE_ZERO)
- {
- fprintf(stderr, "ERROR: Common Header entry_1:[0x%X] Invalid.\n",common_hdr[0]);
- return false;
- }
- else
- {
- printf("SUCCESS: Validated [0x%X] in common header\n",common_hdr[0]);
- }
-
- // 2: Validate the header checskum that is at last byte ( Offset: 7 )
- checksum = calculate_checksum(common_hdr, sizeof(common_hdr)-1);
- if(checksum != common_hdr[HDR_CRC_OFFSET])
- {
- fprintf(stderr, "ERROR: Common Header checksum mismatch."
- " Calculated:[0x%X], Embedded:[0x%X]\n",
- checksum, common_hdr[HDR_CRC_OFFSET]);
-
- return false;
- }
- else
- {
- printf("SUCCESS: Common Header checksum MATCH:[0x%X]\n",checksum);
- }
-
- // !! FIXME FIXME FIXME FIXME
- // This below logic fails if the record type is "Multi". I however have not
- // seen a usecase of that in FRU inventory.. But, if I need to fix, its
- // easy.
- // !! FIXME FIXME FIXME FIXME
-
- // 3: Now start walking the common_hdr array that has offsets into other FRU
- // record areas and validate those. Starting with second entry since the
- // first one is always a [0x01]
- for(fru_section = INTERNAL_OFFSET ; fru_section < (COMMON_HDR_SIZE - 2) ; fru_section++)
- {
- // Offset is 'value given in' internal_offset * 8 from the START of
- // common header. So an an example, 01 00 00 00 01 00 00 fe has
- // product area set at the offset 01 * 8 --> 8 bytes from the START of
- // common header. That means, soon after the header checksum.
- record_offset = common_hdr[fru_section] * EIGHT_BYTES;
-
- if(record_offset)
- {
- // A NON zero value means that the vpd packet has the data for that
- // section. These are the things needed at this moment:
-
- // 1: Goto beginning of the FILE
- rewind(fru_file);
-
- // 2: Move the file pointer to record_offset
- fseek(fru_file, record_offset, SEEK_SET);
-
- // 3: Read first 2 bytes containing FIXED[0x1] and record Length.
- fread(fru_record_hdr, sizeof(fru_record_hdr), 1, fru_file);
-
- // 5: If first element in the record header is _not_ a fixed:[0x01], err out.
- if(fru_record_hdr[0] != HDR_BYTE_ZERO)
- {
- fprintf(stderr, "ERROR: Unexpected :[0x%X] found at Record header",
- fru_record_hdr[0]);
-
- return false;
- }
- else
- {
- printf("SUCCESS: Validated [0x%X] in fru record:[%d] header\n",
- fru_record_hdr[0],fru_section);
- }
-
- // 4: Read Length bytes ( makes a complete record read now )
- uint8_t fru_record_len = fru_record_hdr[1] * EIGHT_BYTES;
-
- printf("RECORD NO[%d], SIZE = [%d] \n",fru_section, fru_record_len);
-
- uint8_t fru_record_data[fru_record_len];
- memset(fru_record_data, 0x0, sizeof(fru_record_data));
-
- // Since the data is from record data[0], move the file pointer again to
- // beginning of record.
- fseek(fru_file, -2, SEEK_CUR);
- fread(fru_record_data, sizeof(fru_record_data), 1, fru_file);
-
- // 5: Calculate checksum (from offset -> (Length-1)).
- // All the bytes except the last byte( which is CRC :) ) will
- // participate in calculating the checksum.
- checksum = calculate_checksum(fru_record_data, sizeof(fru_record_data)-1);
-
- // 6: Verify the embedded checksum in last byte with calculated checksum
- // record_len -1 since length is some N but numbering is 0..N-1
- if(checksum != fru_record_data[fru_record_len-1])
- {
- fprintf(stderr, "ERROR: FRU Header checksum mismatch. "
- " Calculated:[0x%X], Embedded:[0x%X]\n",
- checksum, fru_record_data[fru_record_len-1]);
-
- return false;
- }
- else
- {
- printf("SUCCESS: FRU Header checksum MATCH:[0x%X]\n",checksum);
- }
-
- // 7: If everything is okay, then we are fine.. Else mostly we are
- // awaiting another FRU write -OR- worst case, the VPD is corrupted
- // over BT.
- } // If the packet has data for a particular data record.
- } // End walking all the fru records.
-
- return true;
-}
-
-//---------------------------------------------------------------------
-// Main function but this will be integrated as a API for
-// Open BMC code that accepts a filename and returns success or failure
-//----------------------------------------------------------------------
-int main(int argc, char *argv[])
-{
- // Right way is to do a parse_opt but that is poky for now.
- if(argc != 2)
- {
- usage(argv[0]);
- return -1;
- }
-
- // Check if this file is really present.
- struct stat statbuff;
- if(stat(argv[1], &statbuff) == -1)
- {
- usage(argv[0]);
- return -1;
- }
- else if(statbuff.st_mode & S_IFMT != S_IFREG)
- {
- usage(argv[0]);
- return -1;
- }
-
- bool scan_result = validate_fru_record(argv[1]);
- if(scan_result == true)
- {
- printf("SUCCESS: Validated:[%s]\n",argv[1]);
- }
- else
- {
- printf("ERROR: Validation failed for:[%s]\n",argv[1]);
- return -1;
- }
-
- return 0;
-}
diff --git a/sd_bus_fruvalidator.C b/sd_bus_fruvalidator.C
new file mode 100644
index 0000000..632873c
--- /dev/null
+++ b/sd_bus_fruvalidator.C
@@ -0,0 +1,568 @@
+#include <stdio.h>
+#include <string.h>
+#include <sys/stat.h>
+#include <stdint.h>
+#include <stddef.h>
+#include <stdlib.h>
+#include <systemd/sd-bus.h>
+#include <errno.h>
+#include <vector>
+#include <iostream>
+#include <sstream>
+#include "frup.h" // copied to host-ipmid folder for now
+#include <dlfcn.h>
+
+// Per IPMI v2.0 FRU specification
+struct common_header
+{
+ uint8_t fixed;
+ uint8_t internal_offset;
+ uint8_t chassis_offset;
+ uint8_t board_offset;
+ uint8_t product_offset;
+ uint8_t multi_offset;
+ uint8_t pad;
+ uint8_t crc;
+}__attribute__((packed));
+
+// Contains key info about a particular area.
+typedef struct
+{
+ uint8_t type;
+ uint8_t *offset;
+ size_t len;
+}__attribute__((packed)) fru_area_t;
+
+// Needed to be passed into fru parser alorithm
+typedef std::vector<fru_area_t> fru_area_vec_t;
+
+// To call parse_fru_area function until its packaged and it's .h file is in dev
+// repo.
+typedef int (*parse_fun)(uint8_t, void *, uint8_t, sd_bus_message*);
+
+// first byte in header is 1h per IPMI V2 spec.
+#define HDR_BYTE_ZERO 1
+#define INTERNAL_OFFSET offsetof(struct common_header, internal_offset)
+#define CHASSIS_OFFSET offsetof(struct common_header, chassis_offset)
+#define BOARD_OFFSET offsetof(struct common_header, board_offset)
+#define PRODUCT_OFFSET offsetof(struct common_header, product_offset)
+#define MULTI_OFFSET offsetof(struct common_header, multi_offset)
+#define HDR_CRC_OFFSET offsetof(struct common_header, crc)
+#define EIGHT_BYTES 8
+
+// OpenBMC System Manager dbus framework
+const char *bus_name = "org.openbmc.managers.System";
+const char *object_name = "/org/openbmc/managers/System";
+const char *intf_name = "org.openbmc.managers.System";
+
+//int update_inventory(const uint8_t, const uint8_t *, fru_area_vec_t &);
+
+//------------------------------------------------
+// Takes the pointer to stream of bytes and length
+// returns the 8 bit checksum per IPMI spec.
+//-------------------------------------------------
+unsigned char calculate_crc(unsigned char *data, int len)
+{
+ char crc = 0;
+ int byte = 0;
+
+ for(byte = 0; byte < len; byte++)
+ {
+ crc += *data++;
+ }
+
+ return(-crc);
+}
+
+//---------------
+// Display Usage
+//---------------
+void usage(char *binary)
+{
+ printf("Usage: %s <valid binary ipmi fru file>\n", binary);
+}
+
+//---------------------------------------------------------------------------
+// fru parser wrapper until we get things working okay from FRU parser library
+//---------------------------------------------------------------------------
+int _parse_fru_area(uint8_t area_type, void *fru_data, size_t len, sd_bus_message *fru_dictn)
+{
+ int rc = 0;
+ parse_fun fru_parse_fun;
+
+ void *lib_handle = dlopen("/usr/lib/libifp.so", RTLD_LAZY);
+ fru_parse_fun = (parse_fun)dlsym(lib_handle, "_Z14parse_fru_areahPKvhP14sd_bus_message");
+
+ rc = (*fru_parse_fun)(area_type, fru_data, (uint8_t)len, fru_dictn);
+
+ return rc;
+}
+
+//---------------------------------------------------------------------
+// Accepts a fru area offset in commom hdr and tells which area it is.
+//---------------------------------------------------------------------
+uint8_t get_fru_area_type(uint8_t area_offset)
+{
+ openbmc_ipmi_fru_area_type type = IPMI_FRU_AREA_TYPE_MAX;
+
+ switch(area_offset)
+ {
+ case INTERNAL_OFFSET:
+ type = IPMI_FRU_AREA_INTERNAL_USE;
+ break;
+
+ case CHASSIS_OFFSET:
+ type = IPMI_FRU_AREA_CHASSIS_INFO;
+ break;
+
+ case BOARD_OFFSET:
+ type = IPMI_FRU_AREA_BOARD_INFO;
+ break;
+
+ case PRODUCT_OFFSET:
+ type = IPMI_FRU_AREA_PRODUCT_INFO;
+ break;
+
+ case MULTI_OFFSET:
+ type = IPMI_FRU_AREA_MULTI_RECORD;
+ break;
+
+ default:
+ type = IPMI_FRU_AREA_TYPE_MAX;
+ }
+
+ return type;
+}
+
+//------------------------------------------------------------------------
+// Takes FRU data, invokes Parser for each fru record area and updates
+// Inventory
+//------------------------------------------------------------------------
+int update_inventory(const uint8_t fruid, const uint8_t *fru_data,
+ fru_area_vec_t & area_vec)
+{
+ // Now, use this fru dictionary object and connect with FRU Inventory Dbus
+ // and update the data for this FRU ID.
+ int rc = 0;
+
+ // Dictionary object to hold Name:Value pair
+ sd_bus_message *fru_dict = NULL;
+
+ // SD Bus error report mechanism.
+ sd_bus_error bus_error = SD_BUS_ERROR_NULL;
+
+ // Gets a hook onto either a SYSTEM or SESSION bus
+ sd_bus *bus_type = NULL;
+
+ // Req message contains the specifics about which method etc that we want to
+ // access on which bus, object
+ sd_bus_message *response = NULL;
+
+ rc = sd_bus_open_system(&bus_type);
+ if(rc < 0)
+ {
+ fprintf(stderr,"ERROR: Getting a SYSTEM bus hook\n");
+ return -1;
+ }
+
+ // For each FRU area, extract the needed data , get it parsed and update
+ // the Inventory.
+ for(auto& iter : area_vec)
+ {
+ uint8_t area_type = (iter).type;
+
+ uint8_t area_data[(iter).len];
+ memset(area_data, 0x0, sizeof(area_data));
+
+ // Grab area specific data
+ memmove(area_data, (iter).offset, (iter).len);
+
+ // Need this to get respective DBUS objects
+ const char *area_name = NULL;
+
+ if(area_type == IPMI_FRU_AREA_CHASSIS_INFO)
+ {
+ area_name = "CHASSIS_";
+ }
+ else if(area_type == IPMI_FRU_AREA_BOARD_INFO)
+ {
+ area_name = "BOARD_";
+ }
+ else if(area_type == IPMI_FRU_AREA_PRODUCT_INFO)
+ {
+ area_name = "PRODUCT_";
+ }
+ else
+ {
+ fprintf(stderr, "ERROR: Invalid Area type :[%d]",area_type);
+ break;
+ }
+
+ // What we need is BOARD_1, PRODUCT_1, CHASSIS_1 etc..
+ char fru_area_name[16] = {0};
+ sprintf(fru_area_name,"%s%d",area_name, fruid);
+
+#ifdef __IPMI_DEBUG__
+ printf("Updating Inventory with :[%s]\n",fru_area_name);
+#endif
+ // Each area needs a clean set.
+ sd_bus_error_free(&bus_error);
+ sd_bus_message_unref(response);
+ sd_bus_message_unref(fru_dict);
+
+ // We want to call a method "getObjectFromId" on System Bus that is
+ // made available over OpenBmc system services.
+ rc = sd_bus_call_method(bus_type, // On the System Bus
+ bus_name, // Service to contact
+ object_name, // Object path
+ intf_name, // Interface name
+ "getObjectFromId", // Method to be called
+ &bus_error, // object to return error
+ &response, // Response message on success
+ "ss", // input message (string,byte)
+ "FRU_STR", // First argument to getObjectFromId
+ fru_area_name); // Second Argument
+
+ if(rc < 0)
+ {
+ fprintf(stderr, "Failed to issue method call: %s\n", bus_error.message);
+ break;
+ }
+
+ // Method getObjectFromId returns 3 parameters and all are strings, namely
+ // bus_name , object_path and interface name for accessing that particular
+ // FRU over Inventory SDBUS manager. 'sss' here mentions that format.
+ char *inv_bus_name, *inv_obj_path, *inv_intf_name;
+ rc = sd_bus_message_read(response, "(sss)", &inv_bus_name, &inv_obj_path, &inv_intf_name);
+ if(rc < 0)
+ {
+ fprintf(stderr, "Failed to parse response message:[%s]\n", strerror(-rc));
+ break;
+ }
+
+#ifdef __IPMI_DEBUG__
+ printf("fru_area=[%s], inv_bus_name=[%s], inv_obj_path=[%s],inv_intf_name=[%s]\n",
+ fru_area_name, inv_bus_name, inv_obj_path, inv_intf_name);
+#endif
+
+ // Constructor to allow further initializations and customization.
+ rc = sd_bus_message_new_method_call(bus_type,
+ &fru_dict,
+ inv_bus_name,
+ inv_obj_path,
+ inv_intf_name,
+ "update");
+ if(rc < 0)
+ {
+ fprintf(stderr,"ERROR: creating a update method call\n");
+ break;
+ }
+
+ // A Dictionary ({}) having (string, variant)
+ rc = sd_bus_message_open_container(fru_dict, 'a', "{sv}");
+ if(rc < 0)
+ {
+ fprintf(stderr,"ERROR:[%d] creating a dict container:\n",errno);
+ break;
+ }
+
+ // Fill the container with information
+ rc = _parse_fru_area((iter).type, (void *)area_data, (iter).len, fru_dict);
+ if(rc < 0)
+ {
+ fprintf(stderr,"ERROR parsing FRU records\n");
+ break;
+ }
+
+ sd_bus_message_close_container(fru_dict);
+
+ // Now, Make the actual call to update the FRU inventory database with the
+ // dictionary given by FRU Parser. There is no response message expected for
+ // this.
+ rc = sd_bus_call(bus_type, // On the System Bus
+ fru_dict, // With the Name:value dictionary array
+ 0, //
+ &bus_error, // Object to return error.
+ &response); // Response message if any.
+
+ if(rc < 0)
+ {
+ fprintf(stderr, "ERROR:[%s] updating FRU inventory for ID:[0x%X]\n",
+ bus_error.message, fruid);
+ }
+ else
+ {
+ printf("SUCCESS: Updated:[%s] successfully\n",fru_area_name);
+ }
+ } // END walking the vector of areas and updating
+
+ sd_bus_error_free(&bus_error);
+ sd_bus_message_unref(response);
+ sd_bus_message_unref(fru_dict);
+ sd_bus_unref(bus_type);
+
+ return rc;
+}
+
+//-------------------------------------------------------------------------
+// Validates the CRC and if found good, calls fru areas parser and calls
+// Inventory Dbus with the dictionary of Name:Value for updating.
+//-------------------------------------------------------------------------
+int validate_and_update_inventory(const uint8_t fruid, const uint8_t *fru_data)
+{
+ // Used for generic checksum calculation
+ uint8_t checksum = 0;
+
+ // This can point to any FRU entry.
+ uint8_t fru_entry;
+
+ // A generic offset locator for any FRU record.
+ uint8_t area_offset = 0;
+
+ // First 2 bytes in the record.
+ uint8_t fru_area_hdr[2] = {0};
+
+ // To hold info about individual FRU record areas.
+ fru_area_t fru_area;
+
+ // For parsing and updating Inventory.
+ fru_area_vec_t fru_area_vec;
+
+ int rc = 0;
+
+ uint8_t common_hdr[sizeof(struct common_header)] = {0};
+ memset(common_hdr, 0x0, sizeof(common_hdr));
+
+ // Copy first 8 bytes to verify common header
+ memcpy(common_hdr, fru_data, sizeof(common_hdr));
+
+ // Validate for first byte to always have a value of [1]
+ if(common_hdr[0] != HDR_BYTE_ZERO)
+ {
+ fprintf(stderr, "ERROR: Common Header entry_1:[0x%X] Invalid.\n",common_hdr[0]);
+ return -1;
+ }
+ else
+ {
+ printf("SUCCESS: Validated [0x%X] in common header\n",common_hdr[0]);
+ }
+
+ // Validate the header checskum that is at last byte ( Offset: 7 )
+ checksum = calculate_crc(common_hdr, sizeof(common_hdr)-1);
+ if(checksum != common_hdr[HDR_CRC_OFFSET])
+ {
+#ifdef __IPMI__DEBUG__
+ fprintf(stderr, "ERROR: Common Header checksum mismatch."
+ " Calculated:[0x%X], Embedded:[0x%X]\n",
+ checksum, common_hdr[HDR_CRC_OFFSET]);
+#endif
+ return -1;
+ }
+ else
+ {
+ printf("SUCCESS: Common Header checksum MATCH:[0x%X]\n",checksum);
+ }
+
+ //-------------------------------------------
+ // TODO: Add support for Multi Record later
+ //-------------------------------------------
+
+ // Now start walking the common_hdr array that has offsets into other FRU
+ // record areas and validate those. Starting with second entry since the
+ // first one is always a [0x01]
+ for(fru_entry = INTERNAL_OFFSET; fru_entry < (sizeof(struct common_header) -2); fru_entry++)
+ {
+ // Offset is 'value given in' internal_offset * 8 from the START of
+ // common header. So an an example, 01 00 00 00 01 00 00 fe has
+ // product area set at the offset 01 * 8 --> 8 bytes from the START of
+ // common header. That means, soon after the header checksum.
+ area_offset = common_hdr[fru_entry] * EIGHT_BYTES;
+
+ if(area_offset)
+ {
+ memset((void *)&fru_area, 0x0, sizeof(fru_area_t));
+
+ // Enumerated FRU area.
+ fru_area.type = get_fru_area_type(fru_entry);
+
+ // From start of fru header + record offset, copy 2 bytes.
+ fru_area.offset = &((uint8_t *)fru_data)[area_offset];
+ memcpy(fru_area_hdr, fru_area.offset, sizeof(fru_area_hdr));
+
+ // A NON zero value means that the vpd packet has the data for that
+ // area. err if first element in the record header is _not_ a [0x01].
+ if(fru_area_hdr[0] != HDR_BYTE_ZERO)
+ {
+ fprintf(stderr, "ERROR: Unexpected :[0x%X] found at Record header\n",
+ fru_area_hdr[0]);
+
+ // This vector by now may have had some entries. Since this is a
+ // failure now, clear the state data.
+ fru_area_vec.clear();
+ return -1;
+ }
+ else
+ {
+ printf("SUCCESS: Validated [0x%X] in fru record:[%d] header\n",
+ fru_area_hdr[0],fru_entry);
+ }
+
+ // Read Length bytes ( makes a complete record read now )
+ fru_area.len = fru_area_hdr[1] * EIGHT_BYTES;
+#ifdef __IPMI_DEBUG__
+ printf("AREA NO[%d], SIZE = [%d]\n",fru_entry, fru_area.len);
+#endif
+ uint8_t fru_area_data[fru_area.len];
+ memset(fru_area_data, 0x0, sizeof(fru_area_data));
+
+ memmove(fru_area_data, fru_area.offset, sizeof(fru_area_data));
+
+ // Calculate checksum (from offset -> (Length-1)).
+ // All the bytes except the last byte( which is CRC :) ) will
+ // participate in calculating the checksum.
+ checksum = calculate_crc(fru_area_data, sizeof(fru_area_data)-1);
+
+ // Verify the embedded checksum in last byte with calculated checksum
+ // record_len -1 since length is some N but numbering is 0..N-1
+ if(checksum != fru_area_data[fru_area.len-1])
+ {
+#ifdef __IPMI_DEBUG__
+ fprintf(stderr, "ERROR: FRU Header checksum mismatch. "
+ " Calculated:[0x%X], Embedded:[0x%X]\n",
+ checksum, fru_area_data[fru_area.len - 1]);
+#endif
+ // This vector by now may have had some entries. Since this is a
+ // failure now, clear the state data.
+ fru_area_vec.clear();
+ return -1;
+ }
+ else
+ {
+ printf("SUCCESS: FRU Header checksum MATCH:[0x%X]\n",checksum);
+ }
+
+ // Everything is rihgt about this particular FRU record,
+ fru_area_vec.push_back(fru_area);
+
+ // Update the internal structure with info about this entry that is
+ // needed while handling each areas.
+ } // If the packet has data for a particular data record.
+ } // End walking all the fru records.
+
+ // If we reach here, then we have validated the crc for all the records and
+ // time to call FRU area parser to get a Name:Value pair dictionary.
+ // This will start iterating all over again on the buffer -BUT- now with the
+ // job of taking each areas, getting it parsed and then updating the
+ // DBUS.
+
+ if(!(fru_area_vec.empty()))
+ {
+ rc = update_inventory(fruid, fru_data, fru_area_vec);
+ }
+
+ // We are done with this FRU write packet.
+ fru_area_vec.clear();
+
+ return rc;
+}
+
+///-----------------------------------------------------
+// Accepts the filename and validates per IPMI FRU spec
+//----------------------------------------------------
+int validate_fru_area(const uint8_t fruid, const char *fru_file_name)
+{
+ int file_size = 0;
+ uint8_t *fru_data = NULL;
+ int bytes_read = 0;
+ int rc = 0;
+
+ // For now, this is user supplied in CLI. But this will be a parameter from
+ // fru handler
+ FILE *fru_file = fopen(fru_file_name,"rb");
+ if(fru_file == NULL)
+ {
+ fprintf(stderr, "ERROR: opening:[%s]\n",fru_file_name);
+ perror("Error:");
+ return -1;
+ }
+
+ // Get the size of the file to allocate buffer to hold the entire contents.
+ if(fseek(fru_file, 0, SEEK_END))
+ {
+ perror("Error:");
+ return -1;
+ }
+
+ file_size = ftell(fru_file);
+ fru_data = (uint8_t *)malloc(file_size);
+
+ // Read entire file contents to the internal buffer
+ if(fseek(fru_file, 0, SEEK_SET))
+ {
+ perror("Error:");
+ return -1;
+ }
+
+ bytes_read = fread(fru_data, file_size, 1, fru_file);
+ if(bytes_read != 1)
+ {
+ fprintf(stderr, "ERROR reading common header. Bytes read=:[%d]\n",bytes_read);
+ perror("Error:");
+ return -1;
+ }
+ fclose(fru_file);
+
+ rc = validate_and_update_inventory(fruid, fru_data);
+
+ if(fru_data)
+ {
+ free(fru_data);
+ fru_data = NULL;
+ }
+
+ return rc;
+}
+
+// ---------------------------------------------------------------------
+// Main function but this will be integrated as a API for
+// Open BMC code that accepts a filename and returns success or failure
+//--------------------------------------------------------------------
+int main(int argc, char *argv[])
+{
+ // Right way is to do a parse_opt but that is poky for now.
+ if(argc != 2)
+ {
+ usage(argv[0]);
+ return -1;
+ }
+
+ /* Check if this file is really present. */
+ struct stat statbuff;
+ if(stat(argv[1], &statbuff) == -1)
+ {
+ usage(argv[0]);
+ return -1;
+ }
+ else if((statbuff.st_mode & S_IFMT) != S_IFREG)
+ {
+ usage(argv[0]);
+ return -1;
+ }
+
+ // For now, I am having FRU file numbers as 1 , 2 , 3..
+ uint8_t fruid = 0;
+ fruid = atoi(argv[1]);
+
+ int scan_result = validate_fru_area(fruid, argv[1]);
+ if(scan_result < 0)
+ {
+ printf("ERROR: Validation failed for:[%d]\n",fruid);
+ return -1;
+ }
+ else
+ {
+ printf("SUCCESS: Validated:[%s]\n",argv[1]);
+ }
+
+ return 0;
+}
--
2.6.0
More information about the openbmc
mailing list