[PATCH openbmc 8/8] 1. Add a R/W attribute "update_interval". By default, it is set to 1000ms. This defines the minimum interval occ driver poll occ for latest sensor data. When reading occ hwmon attributes within the update_interval, the driver will no poll occ and it returns sendor data from cached data.
OpenBMC Patches
openbmc-patches at stwcx.xyz
Mon Dec 7 03:50:18 AEDT 2015
From: adamliyi <adamliyi at msn.com>
You can do e.g. "echo 5000 > /sys/class/hwmon0/update_interval" to change it to 5000ms.
2. Revise code based on Jeremy's comments.
The driver name is changed to occ_i2c.c
3. This patch will be removed when the occ_i2c driver is merged into Linux tree.
---
.../linux/linux-obmc/occ_hwmon.patch | 1667 +++++++++-----------
1 file changed, 728 insertions(+), 939 deletions(-)
diff --git a/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc/occ_hwmon.patch b/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc/occ_hwmon.patch
index 612214d..0e803b7 100644
--- a/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc/occ_hwmon.patch
+++ b/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc/occ_hwmon.patch
@@ -1,41 +1,45 @@
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
-index e13c902..38aff0c 100644
+index e13c902..7c74854 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
-@@ -1167,6 +1167,13 @@ config SENSORS_NCT7904
+@@ -1167,6 +1167,16 @@ config SENSORS_NCT7904
This driver can also be built as a module. If so, the module
will be called nct7904.
+config SENSORS_OCC
-+ tristate "OCC sensor driver for IBM Power CPU"
++ tristate "OCC sensor BMC driver"
+ depends on I2C
+ help
-+ If you say yes here you get support for driver to read sensors in
-+ IBM Power CPU On-Chip-Controller. module will be called occ.
++ If you say yes here you get support for BMC to monitor IBM
++ Power CPU sensors via the On-Chip-Controller (OCC).
++
++ This driver can aslo be built as a module. If so, the module
++ will be called occ_i2c.
+
config SENSORS_PCF8591
tristate "Philips PCF8591 ADC/DAC"
depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
-index 9e0f3dd..53dc3b3 100644
+index 9e0f3dd..d6fa923 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -123,6 +123,7 @@ obj-$(CONFIG_SENSORS_NCT6775) += nct6775.o
obj-$(CONFIG_SENSORS_NCT7802) += nct7802.o
obj-$(CONFIG_SENSORS_NCT7904) += nct7904.o
obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o
-+obj-$(CONFIG_SENSORS_OCC) += occ.o
++obj-$(CONFIG_SENSORS_OCC) += occ_i2c.o
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
-diff --git a/drivers/hwmon/occ.c b/drivers/hwmon/occ.c
+diff --git a/drivers/hwmon/occ_i2c.c b/drivers/hwmon/occ_i2c.c
new file mode 100644
-index 0000000..f265ff3
+index 0000000..7a5755d
--- /dev/null
-+++ b/drivers/hwmon/occ.c
-@@ -0,0 +1,1529 @@
++++ b/drivers/hwmon/occ_i2c.c
+@@ -0,0 +1,1315 @@
+/*
-+ * Open BMC OCC HWMON driver - read Power8 OCC (On Chip Controller) sensor data via i2c.
++ * BMC OCC HWMON driver - read IBM Power8 OCC (On Chip Controller)
++ * sensor data via i2c.
+ *
+ * Copyright (c) 2015 IBM (Alvin Wang, Li Yi)
+ *
@@ -48,10 +52,6 @@ index 0000000..f265ff3
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
@@ -65,44 +65,63 @@ index 0000000..f265ff3
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/delay.h>
++#include <linux/kernel.h>
++#include <linux/device.h>
++
++
++#define OCC_I2C_ADDR 0x50
++#define OCC_I2C_NAME "occ-i2c"
++
++#define OCC_DATA_MAX 4096 /* 4KB at most */
++/* i2c read and write occ sensors */
++#define I2C_READ_ERROR 1
++#define I2C_WRITE_ERROR 2
++
++/* To generate attn to OCC */
++#define ATTN_DATA 0x0006B035
++/* For BMC to read/write SRAM */
++#define OCB_ADDRESS 0x0006B070
++#define OCB_DATA 0x0006B075
++#define OCB_STATUS_CONTROL_AND 0x0006B072
++#define OCB_STATUS_CONTROL_OR 0x0006B073
++#define OCC_COMMAND_ADDR 0xFFFF6000
++#define OCC_RESPONSE_ADDR 0xFFFF7000
+
-+//#define DEBUG 1
+
-+/* ------------------------------------------------------------*/
+/* OCC sensor data format */
-+typedef struct {
++struct occ_sensor {
+ uint16_t sensor_id;
+ uint16_t value;
-+} occ_sensor;
++};
+
-+typedef struct {
++struct power_sensor {
+ uint16_t sensor_id;
+ uint32_t update_tag;
+ uint32_t accumulator;
+ uint16_t value;
-+} powr_sensor;
++};
+
-+typedef struct {
++struct caps_sensor {
+ uint16_t curr_powercap;
+ uint16_t curr_powerreading;
+ uint16_t norm_powercap;
+ uint16_t max_powercap;
+ uint16_t min_powercap;
+ uint16_t user_powerlimit;
-+} caps_sensor;
++};
+
-+typedef struct {
-+ char sensor_type[5];
++struct sensor_data_block {
++ uint8_t sensor_type[4];
+ uint8_t reserved0;
+ uint8_t sensor_format;
+ uint8_t sensor_length;
+ uint8_t num_of_sensors;
-+ occ_sensor *sensor;
-+ powr_sensor *powr;
-+ caps_sensor *caps;
-+} sensor_data_block;
++ struct occ_sensor *sensor;
++ struct power_sensor *power;
++ struct caps_sensor *caps;
++};
+
-+typedef struct {
++struct occ_poll_header {
+ uint8_t status;
+ uint8_t ext_status;
+ uint8_t occs_present;
@@ -115,510 +134,484 @@ index 0000000..f265ff3
+ uint16_t error_log_length;
+ uint8_t reserved2;
+ uint8_t reserved3;
-+ char occ_code_level[17];
-+ char sensor_eye_catcher[7];
-+ uint8_t num_of_sensor_blocks;
++ uint8_t occ_code_level[16];
++ uint8_t sensor_eye_catcher[6];
++ uint8_t sensor_block_num;
+ uint8_t sensor_data_version;
-+ sensor_data_block* blocks;
-+} occ_poll_data;
++};
+
-+typedef struct {
++struct occ_response {
+ uint8_t sequence_num;
+ uint8_t cmd_type;
+ uint8_t rtn_status;
+ uint16_t data_length;
-+ occ_poll_data data;
++ struct occ_poll_header header;
++ struct sensor_data_block *blocks;
+ uint16_t chk_sum;
+ int temp_block_id;
+ int freq_block_id;
+ int power_block_id;
+ int caps_block_id;
-+} occ_response_t;
-+
-+//static occ_response_t occ_resp;
++};
+
-+/* Each client has this additional data */
++/* data private to each client */
+struct occ_drv_data {
+ struct i2c_client *client;
+ struct device *hwmon_dev;
+ struct mutex update_lock;
-+ char valid; /* !=0 if sensor data are valid */
-+ unsigned long last_updated; /* In jiffies */
-+ unsigned long sample_time; /* Mininum timer interval for sampling In jiffies */
-+ occ_response_t occ_resp;
++ bool valid;
++ unsigned long last_updated;
++ /* Minimum timer interval for sampling In jiffies */
++ unsigned long update_interval;
++ struct occ_response occ_resp;
+};
+
-+/*-----------------------------------------------------------------------*/
-+/* i2c read and write occ sensors */
-+
-+#define OCC_DATA_MAX 4096 /* 4KB at most */
-+#define I2C_STATUS_REG 0x000d0001
-+#define I2C_ERROR_REG 0x000d0002
-+#define I2C_READ_ERROR 1
-+#define I2C_WRITE_ERROR 2
-+#define I2C_DATABUFFER_SIZE_ERROR 3
-+
-+/*
-+#define SCOM_OCC_SRAM_WOX 0x0006B013
-+#define SCOM_OCC_SRAM_WAND 0x0006B012
-+#define SCOM_OCC_SRAM_ADDR 0x0006B010
-+#define SCOM_OCC_SRAM_DATA 0x0006B015
-+*/
-+
-+// To generate attn to OCC
-+#define ATTN_DATA 0x0006B035
-+
-+// For BMC to read/write SRAM
-+#define OCB_ADDRESS 0x0006B070
-+#define OCB_DATA 0x0006B075
-+#define OCB_STATUS_CONTROL_AND 0x0006B072
-+#define OCB_STATUS_CONTROL_OR 0x0006B073
-+
-+#define OCC_COMMAND_ADDR 0xFFFF6000
-+#define OCC_RESPONSE_ADDR 0xFFFF7000
++enum sensor_t {
++ freq,
++ temp,
++ power,
++ caps
++};
+
-+static int deinit_occ_resp_buf(occ_response_t *p)
++static void deinit_occ_resp_buf(struct occ_response *p)
+{
+ int b;
+
-+ if (p == NULL)
-+ return 0;
++ if (!p)
++ return;
+
-+ if (p->data.blocks == NULL)
-+ return 0;
++ if (!p->blocks)
++ return;
+
-+ for(b = 0; b < p->data.num_of_sensor_blocks; b++) {
-+ if (!p->data.blocks[b].sensor)
-+ kfree(p->data.blocks[b].sensor);
-+ if (!p->data.blocks[b].powr)
-+ kfree(p->data.blocks[b].powr);
-+ if (!p->data.blocks[b].caps)
-+ kfree(p->data.blocks[b].caps);
++ for (b = 0; b < p->header.sensor_block_num; b++) {
++ if (p->blocks[b].sensor)
++ kfree(p->blocks[b].sensor);
++ if (p->blocks[b].power)
++ kfree(p->blocks[b].power);
++ if (p->blocks[b].caps)
++ kfree(p->blocks[b].caps);
+ }
+
-+ kfree(p->data.blocks);
++ kfree(p->blocks);
+
+ memset(p, 0, sizeof(*p));
-+
-+
-+ return 0;
++ p->freq_block_id = -1;
++ p->temp_block_id = -1;
++ p->power_block_id = -1;
++ p->caps_block_id = -1;
+}
+
-+static ssize_t occ_i2c_read(struct i2c_client *client, char *buf, size_t count)
++static ssize_t occ_i2c_read(struct i2c_client *client, void *buf, size_t count)
+{
-+ int ret = 0;
++ if (count > OCC_DATA_MAX)
++ count = OCC_DATA_MAX;
+
-+ if (count > 8192)
-+ count = 8192;
-+
-+ //printk("i2c_read: reading %zu bytes @0x%x.\n", count, client->addr);
-+ ret = i2c_master_recv(client, buf, count);
-+ return ret;
++ dev_dbg(&client->dev, "i2c_read: reading %zu bytes @0x%x.\n",
++ count, client->addr);
++ return i2c_master_recv(client, buf, count);
+}
+
-+static ssize_t occ_i2c_write(struct i2c_client *client, const char *buf, size_t count)
++static ssize_t occ_i2c_write(struct i2c_client *client, const void *buf,
++ size_t count)
+{
-+ int ret = 0;
-+
-+ if (count > 8192)
-+ count = 8192;
++ if (count > OCC_DATA_MAX)
++ count = OCC_DATA_MAX;
+
-+ //printk("i2c_write: writing %zu bytes @0x%x.\n", count, client->addr);
-+ ret = i2c_master_send(client, buf, count);
-+ return ret;
++ dev_dbg(&client->dev, "i2c_write: writing %zu bytes @0x%x.\n",
++ count, client->addr);
++ return i2c_master_send(client, buf, count);
+}
+
-+/* read two 4-byte value */
-+static int occ_getscom(struct i2c_client *client, uint32_t address, uint32_t *value0, uint32_t *value1)
++/* read 8-byte value and put into data[offset] */
++static int occ_getscomb(struct i2c_client *client, uint32_t address,
++ uint8_t *data, int offset)
+{
-+ uint32_t ret = 0;
++ uint32_t ret;
+ char buf[8];
-+ const char* address_buf = (const char*)&address;
++ int i = 0;
+
-+ //P8 i2c slave requires address to be shifted by 1
++ /* P8 i2c slave requires address to be shifted by 1 */
+ address = address << 1;
+
-+ ret = occ_i2c_write(client, address_buf, sizeof(address));
-+ /* FIXME: ast i2c driver does not read corret value */
-+ //if (ret != sizeof(address))
-+ // return -I2C_WRITE_ERROR;
++ ret = occ_i2c_write(client, &address,
++ sizeof(address));
++
++ if (ret != sizeof(address))
++ return -I2C_WRITE_ERROR;
+
+ ret = occ_i2c_read(client, buf, sizeof(buf));
-+ //if (ret != sizeof(buf))
-+ // return -I2C_READ_ERROR;
++ if (ret != sizeof(buf))
++ return -I2C_READ_ERROR;
+
-+ memcpy(value1, &buf[0], sizeof(*value1));
-+ memcpy(value0, &buf[4], sizeof(*value0));
++ for (i = 0; i < 8; i++)
++ data[offset + i] = buf[7 - i];
+
+ return 0;
+}
+
-+/* read 8-byte value and put into data[offset] */
-+static int occ_getscomb(struct i2c_client *client, uint32_t address, char* data, int offset)
++static int occ_putscom(struct i2c_client *client, uint32_t address,
++ uint32_t data0, uint32_t data1)
+{
-+ uint32_t ret = 0;
-+ const char* address_buf = (const char*)&address;
-+ char buf[8];
-+ int b = 0;
++ uint32_t buf[3];
++ uint32_t ret;
+
-+ //P8 i2c slave requires address to be shifted by 1
++ /* P8 i2c slave requires address to be shifted by 1 */
+ address = address << 1;
+
-+ ret = occ_i2c_write(client, address_buf, sizeof(address));
-+ //if (ret != sizeof(address))
-+ // return -I2C_WRITE_ERROR;
++ buf[0] = address;
++ buf[1] = data1;
++ buf[2] = data0;
+
-+ ret = occ_i2c_read(client, buf, sizeof(buf));
-+ //if (ret != sizeof(buf))
-+ // return -I2C_READ_ERROR;
-+
-+ for (b = 0; b < 8; b++) {
-+ data[offset + b] = buf[7 - b];
-+ }
++ ret = occ_i2c_write(client, buf, sizeof(buf));
++ if (ret != sizeof(buf))
++ return I2C_WRITE_ERROR;
+
+ return 0;
+}
+
-+static int occ_putscom(struct i2c_client *client, uint32_t address, uint32_t data0, uint32_t data1)
++static inline uint16_t get_occdata_length(uint8_t *d)
+{
-+ const char* address_buf = (const char*)&address;
-+ const char* d0 = (const char*)&data0;
-+ const char* d1 = (const char*)&data1;
-+ char buf[12];
-+ uint32_t ret = 0;
-+
-+ //P8 i2c slave requires address to be shifted by 1
-+ address = address << 1;
-+
-+ memcpy(&buf[0], address_buf, sizeof(address));
-+ memcpy(&buf[4], d1, sizeof(data1));
-+ memcpy(&buf[8], d0, sizeof(data0));
-+
-+ ret = occ_i2c_write(client, buf, sizeof(buf));
-+ //if (ret != sizeof(buf))
-+ // return I2C_WRITE_ERROR;
-+
-+ return 0;
++ return (d[3] << 8) | d[4];
+}
+
-+static int occ_check_i2c_errors(struct i2c_client *client)
++static int occ_renew_sensor(struct occ_response *o, uint8_t sensor_length,
++ uint8_t num_of_sensors, enum sensor_t t, int block)
+{
-+ uint32_t v0;
-+ uint32_t v1;
-+
-+ occ_getscom(client, I2C_STATUS_REG, &v0, &v1);
-+ if (v0 != 0x80000000) {
-+ printk("ERROR present in P8 I2C Slave. Clearing...\n");
-+ occ_putscom(client, I2C_ERROR_REG, 0x00000000, 0x00000000);
-+ occ_putscom(client, I2C_STATUS_REG, 0x00000000, 0x00000000);
++ void *sensor;
++ int ret;
++
++ switch (t) {
++ case temp:
++ sensor = o->temp_block_id == -1 ? NULL :
++ o->blocks[o->temp_block_id].sensor;
++ break;
++ case freq:
++ sensor = o->freq_block_id == -1 ? NULL :
++ o->blocks[o->freq_block_id].sensor;
++ break;
++ case power:
++ sensor = o->power_block_id == -1 ? NULL :
++ o->blocks[o->power_block_id].power;
++ break;
++ case caps:
++ sensor = o->caps_block_id == -1 ? NULL :
++ o->blocks[o->caps_block_id].caps;
++ break;
++ default:
++ sensor = NULL;
++ break;
++ }
++
++ /* empty sensor block, release older sensor data */
++ if (num_of_sensors == 0 || sensor_length == 0) {
++ if (sensor)
++ kfree(sensor);
+ return -1;
+ }
+
++ switch (t) {
++ case temp:
++ if (!sensor || num_of_sensors !=
++ o->blocks[o->temp_block_id].num_of_sensors) {
++ if (sensor)
++ kfree(sensor);
++ o->blocks[block].sensor =
++ //kzalloc(sizeof(struct occ_sensor) *
++ // num_of_sensors, GFP_KERNEL);
++ kcalloc(num_of_sensors,
++ sizeof(struct occ_sensor), GFP_KERNEL);
++ if (!o->blocks[block].sensor) {
++ ret = -ENOMEM;
++ goto err;
++ }
++ }
++ break;
++ case freq:
++ if (!sensor || num_of_sensors !=
++ o->blocks[o->freq_block_id].num_of_sensors) {
++ if (sensor)
++ kfree(sensor);
++ o->blocks[block].sensor =
++ //kzalloc(sizeof(struct occ_sensor) *
++ // num_of_sensors, GFP_KERNEL);
++ kcalloc(num_of_sensors,
++ sizeof(struct occ_sensor), GFP_KERNEL);
++ if (!o->blocks[block].sensor) {
++ ret = -ENOMEM;
++ goto err;
++ }
++ }
++ break;
++ case power:
++ if (!sensor || num_of_sensors !=
++ o->blocks[o->power_block_id].num_of_sensors) {
++ if (sensor)
++ kfree(sensor);
++ o->blocks[block].power =
++ //kzalloc(sizeof(struct power_sensor) *
++ // num_of_sensors, GFP_KERNEL);
++ kcalloc(num_of_sensors,
++ sizeof(struct power_sensor), GFP_KERNEL);
++ if (!o->blocks[block].power) {
++ ret = -ENOMEM;
++ goto err;
++ }
++ }
++ break;
++ case caps:
++ if (!sensor || num_of_sensors !=
++ o->blocks[o->caps_block_id].num_of_sensors) {
++ if (sensor)
++ kfree(sensor);
++ o->blocks[block].caps =
++ //kzalloc(sizeof(struct caps_sensor) *
++ // num_of_sensors, GFP_KERNEL);
++ kcalloc(num_of_sensors,
++ sizeof(struct caps_sensor), GFP_KERNEL);
++ if (!o->blocks[block].caps) {
++ ret = -ENOMEM;
++ goto err;
++ }
++ }
++ break;
++ default:
++ sensor = NULL;
++ break;
++ }
++
+ return 0;
++err:
++ deinit_occ_resp_buf(o);
++ return ret;
+}
+
-+
-+static inline uint16_t get_occdata_length(char* d)
++/* refer to OCC interface document for Poll Return Packet format */
++#define RESP_HEADER_OFFSET 5
++#define SENSOR_STR_OFFSET 37
++#define SENSOR_BLOCK_NUM_OFFSET 43
++#define SENSOR_BLOCK_OFFSET 45
++static int parse_occ_response(struct i2c_client *client,
++ uint8_t *d, struct occ_response *o)
+{
-+ uint16_t data_length = 0;
-+
-+ data_length = d[3] << 8;
-+ data_length = data_length | d[4];
-+ return data_length;
-+}
-+
++ int b;
++ int s;
++ int ret;
++ int dnum = SENSOR_BLOCK_OFFSET;
++ struct occ_sensor *f_sensor;
++ struct occ_sensor *t_sensor;
++ struct power_sensor *p_sensor;
++ struct caps_sensor *c_sensor;
++ uint8_t sensor_block_num;
++ uint8_t sensor_type[4];
++ uint8_t sensor_format;
++ uint8_t sensor_length;
++ uint8_t num_of_sensors;
+
-+static int parse_occ_response(char* d, occ_response_t* o)
-+{
-+ int b = 0;
-+ int s = 0;
-+ int ret = 0;
-+ int dnum = 45;
-+
-+ o->sequence_num = d[0];
-+ o->cmd_type = d[1];
-+ o->rtn_status = d[2];
-+ o->data_length = d[3] << 8;
-+ o->data_length = o->data_length | d[4];
-+ o->data.status = d[5];
-+ o->data.ext_status = d[6];
-+ o->data.occs_present = d[7];
-+ o->data.config = d[8];
-+ o->data.occ_state = d[9];
-+ o->data.reserved0 = d[10];
-+ o->data.reserved1 = d[11];
-+ o->data.error_log_id = d[12];
-+ o->data.error_log_addr_start = d[13] << 24;
-+ o->data.error_log_addr_start = o->data.error_log_addr_start | d[14] << 16;
-+ o->data.error_log_addr_start = o->data.error_log_addr_start | d[15] << 8;
-+ o->data.error_log_addr_start = o->data.error_log_addr_start | d[16];
-+ o->data.error_log_length = d[17] << 8;
-+ o->data.error_log_length = o->data.error_log_length | d[18];
-+ o->data.reserved2 = d[19];
-+ o->data.reserved3 = d[20];
-+ strncpy(&o->data.occ_code_level[0], (const char*)&d[21], 16);
-+ strncpy(&o->data.sensor_eye_catcher[0], (const char*)&d[37], 6);
-+ o->data.sensor_eye_catcher[6]='\0';
-+ o->data.num_of_sensor_blocks=d[43];
-+ o->data.sensor_data_version = d[44];
-+
-+ if (strcmp(o->data.sensor_eye_catcher, "SENSOR") != 0) {
-+ printk("ERROR: SENSOR not found at byte 37 (%s)\n",o->data.sensor_eye_catcher);
-+ return -1;
++ /* check if the data is valid */
++ if (strncmp(&d[SENSOR_STR_OFFSET], "SENSOR", 6) != 0) {
++ dev_err(&client->dev,
++ "ERROR: SENSOR String in response\n");
++ ret = -1;
++ goto err;
++ }
++
++ sensor_block_num = d[SENSOR_BLOCK_NUM_OFFSET];
++ if (sensor_block_num == 0) {
++ dev_err(&client->dev, "ERROR: SENSOR block num is 0\n");
++ ret = -1;
++ goto err;
+ }
+
-+ if (o->data.num_of_sensor_blocks == 0) {
-+ printk("ERROR: SENSOR block num is 0\n");
-+ return -1;
++ /* if sensor block has changed, re-malloc */
++ if (sensor_block_num != o->header.sensor_block_num) {
++ deinit_occ_resp_buf(o);
++ //o->blocks = kzalloc(sizeof(struct sensor_data_block) *
++ // sensor_block_num, GFP_KERNEL);
++ o->blocks = kcalloc(sensor_block_num,
++ sizeof(struct sensor_data_block), GFP_KERNEL);
++ if (!o->blocks)
++ return -ENOMEM;
+ }
+
-+ o->data.blocks = kzalloc(sizeof(sensor_data_block) * o->data.num_of_sensor_blocks, GFP_KERNEL);
-+ if (o->data.blocks == NULL)
-+ return -ENOMEM;
++ memcpy(&o->header, &d[RESP_HEADER_OFFSET], sizeof(o->header));
++ o->header.error_log_addr_start =
++ be32_to_cpu(o->header.error_log_addr_start);
++ o->header.error_log_length = be16_to_cpu(o->header.error_log_length);
+
-+ //printk("Reading %d sensor blocks\n", o->data.num_of_sensor_blocks);
-+ o->temp_block_id = -1;
-+ o->freq_block_id = -1;
-+ o->power_block_id = -1;
-+ o->caps_block_id = -1;
-+ for(b = 0; b < o->data.num_of_sensor_blocks; b++) {
++ dev_dbg(&client->dev, "Reading %d sensor blocks\n",
++ o->header.sensor_block_num);
++ for (b = 0; b < sensor_block_num; b++) {
+ /* 8-byte sensor block head */
-+ strncpy(&o->data.blocks[b].sensor_type[0], (const char*)&d[dnum], 4);
-+ o->data.blocks[b].reserved0 = d[dnum+4];
-+ o->data.blocks[b].sensor_format = d[dnum+5];
-+ o->data.blocks[b].sensor_length = d[dnum+6];
-+ o->data.blocks[b].num_of_sensors = d[dnum+7];
++ strncpy(sensor_type, &d[dnum], 4);
++ sensor_format = d[dnum+5];
++ sensor_length = d[dnum+6];
++ num_of_sensors = d[dnum+7];
+ dnum = dnum + 8;
+
-+ //printk("sensor block[%d]: type: %s, num_of_sensors: %d, sensor_length: %u\n",
-+ //b, o->data.blocks[b].sensor_type, o->data.blocks[b].num_of_sensors,
-+ //o->data.blocks[b].sensor_length);
-+
-+ /* empty sensor block */
-+ if (o->data.blocks[b].num_of_sensors <= 0)
-+ continue;
-+ if (o->data.blocks[b].sensor_length == 0)
-+ continue;
++ dev_dbg(&client->dev,
++ "sensor block[%d]: type: %s, num_of_sensors: %d\n",
++ b, sensor_type, num_of_sensors);
+
-+ if (strcmp(o->data.blocks[b].sensor_type, "FREQ") == 0) {
-+ o->data.blocks[b].sensor =
-+ kzalloc(sizeof(occ_sensor) * o->data.blocks[b].num_of_sensors, GFP_KERNEL);
++ if (strncmp(sensor_type, "FREQ", 4) == 0) {
++ ret = occ_renew_sensor(o, sensor_length,
++ num_of_sensors, freq, b);
++ if (ret)
++ continue;
+
-+ if (o->data.blocks[b].sensor == NULL) {
-+ ret = -ENOMEM;
-+ goto abort;
-+ }
+ o->freq_block_id = b;
-+ for (s = 0; s < o->data.blocks[b].num_of_sensors; s++) {
-+ o->data.blocks[b].sensor[s].sensor_id = d[dnum] << 8;
-+ o->data.blocks[b].sensor[s].sensor_id =
-+ o->data.blocks[b].sensor[s].sensor_id | d[dnum+1];
-+ o->data.blocks[b].sensor[s].value = d[dnum+2] << 8;
-+ o->data.blocks[b].sensor[s].value = o->data.blocks[b].sensor[s].value | d[dnum+3];
-+ //printk("sensor[%d]-[%d]: id: %u, value: %u\n",
-+ // b, s, o->data.blocks[b].sensor[s].sensor_id, o->data.blocks[b].sensor[s].value);
-+ dnum = dnum + o->data.blocks[b].sensor_length;
-+ }
-+ }
-+ else if (strcmp(o->data.blocks[b].sensor_type, "TEMP") == 0) {
-+
-+ o->data.blocks[b].sensor =
-+ kzalloc(sizeof(occ_sensor) * o->data.blocks[b].num_of_sensors, GFP_KERNEL);
-+
-+ if (o->data.blocks[b].sensor == NULL) {
-+ ret = -ENOMEM;
-+ goto abort;
++ for (s = 0; s < num_of_sensors; s++) {
++ f_sensor = &o->blocks[b].sensor[s];
++ f_sensor->sensor_id = (d[dnum]<<8) | d[dnum+1];
++ f_sensor->value = (d[dnum+2]<<8) | d[dnum+3];
++ dev_dbg(&client->dev,
++ "sensor[%d]-[%d]: id: %u, value: %u\n",
++ b, s, f_sensor->sensor_id,
++ f_sensor->value);
++ dnum = dnum + sensor_length;
+ }
++ } else if (strncmp(sensor_type, "TEMP", 4) == 0) {
++ ret = occ_renew_sensor(o, sensor_length,
++ num_of_sensors, temp, b);
++ if (ret)
++ continue;
+
+ o->temp_block_id = b;
-+ for (s = 0; s < o->data.blocks[b].num_of_sensors; s++) {
-+ o->data.blocks[b].sensor[s].sensor_id = d[dnum] << 8;
-+ o->data.blocks[b].sensor[s].sensor_id =
-+ o->data.blocks[b].sensor[s].sensor_id | d[dnum+1];
-+ o->data.blocks[b].sensor[s].value = d[dnum+2] << 8;
-+ o->data.blocks[b].sensor[s].value = o->data.blocks[b].sensor[s].value | d[dnum+3];
-+ //printk("sensor[%d]-[%d]: id: %u, value: %u\n",
-+ // b, s, o->data.blocks[b].sensor[s].sensor_id, o->data.blocks[b].sensor[s].value);
-+ dnum = dnum + o->data.blocks[b].sensor_length;
++ for (s = 0; s < num_of_sensors; s++) {
++ t_sensor = &o->blocks[b].sensor[s];
++ t_sensor->sensor_id = (d[dnum]<<8) | d[dnum+1];
++ t_sensor->value = (d[dnum+2] << 8) | d[dnum+3];
++ dev_dbg(&client->dev,
++ "sensor[%d]-[%d]: id: %u, value: %u\n",
++ b, s, t_sensor->sensor_id,
++ t_sensor->value);
++ dnum = dnum + sensor_length;
+ }
-+ }
-+ else if (strcmp(o->data.blocks[b].sensor_type, "POWR") == 0) {
-+
-+ o->data.blocks[b].powr =
-+ kzalloc(sizeof(powr_sensor) * o->data.blocks[b].num_of_sensors, GFP_KERNEL);
++ } else if (strncmp(sensor_type, "POWR", 4) == 0) {
++ ret = occ_renew_sensor(o, sensor_length,
++ num_of_sensors, power, b);
++ if (ret)
++ continue;
+
-+ if (o->data.blocks[b].powr == NULL) {
-+ ret = -ENOMEM;
-+ goto abort;
-+ }
+ o->power_block_id = b;
-+ for (s = 0; s < o->data.blocks[b].num_of_sensors; s++) {
-+ o->data.blocks[b].powr[s].sensor_id = d[dnum] << 8;
-+ o->data.blocks[b].powr[s].sensor_id = o->data.blocks[b].powr[s].sensor_id | d[dnum+1];
-+ o->data.blocks[b].powr[s].update_tag = d[dnum+2] << 24;
-+ o->data.blocks[b].powr[s].update_tag = o->data.blocks[b].powr[s].update_tag | d[dnum+3] << 16;
-+ o->data.blocks[b].powr[s].update_tag = o->data.blocks[b].powr[s].update_tag | d[dnum+4] << 8;
-+ o->data.blocks[b].powr[s].update_tag = o->data.blocks[b].powr[s].update_tag | d[dnum+5];
-+ o->data.blocks[b].powr[s].accumulator = d[dnum+6] << 24;
-+ o->data.blocks[b].powr[s].accumulator = o->data.blocks[b].powr[s].accumulator | d[dnum+7] << 16;
-+ o->data.blocks[b].powr[s].accumulator = o->data.blocks[b].powr[s].accumulator | d[dnum+8] << 8;
-+ o->data.blocks[b].powr[s].accumulator = o->data.blocks[b].powr[s].accumulator | d[dnum+9];
-+ o->data.blocks[b].powr[s].value = d[dnum+10] << 8;
-+ o->data.blocks[b].powr[s].value = o->data.blocks[b].powr[s].value | d[dnum+11];
-+
-+ //printk("sensor[%d]-[%d]: id: %u, value: %u\n",
-+ // b, s, o->data.blocks[b].powr[s].sensor_id, o->data.blocks[b].powr[s].value);
-+
-+ dnum = dnum + o->data.blocks[b].sensor_length;
++ for (s = 0; s < num_of_sensors; s++) {
++ p_sensor = &o->blocks[b].power[s];
++ p_sensor->sensor_id = (d[dnum]<<8) | d[dnum+1];
++ p_sensor->update_tag =
++ (d[dnum+2] << 24) | (d[dnum+3] << 16) |
++ (d[dnum+4] << 8) | d[dnum+5];
++ p_sensor->accumulator =
++ (d[dnum+6] << 24) | (d[dnum+7] << 16) |
++ (d[dnum+8] << 8) | d[dnum+9];
++ p_sensor->value =
++ (d[dnum+10] << 8) | d[dnum+11];
++
++ dev_dbg(&client->dev,
++ "sensor[%d]-[%d]: id: %u, value: %u\n",
++ b, s, p_sensor->sensor_id,
++ p_sensor->value);
++
++ dnum = dnum + sensor_length;
+ }
-+ }
-+ else if (strcmp(o->data.blocks[b].sensor_type, "CAPS") == 0) {
-+
-+ o->data.blocks[b].caps =
-+ kzalloc(sizeof(caps_sensor) * o->data.blocks[b].num_of_sensors, GFP_KERNEL);
++ } else if (strncmp(sensor_type, "CAPS", 4) == 0) {
++ ret = occ_renew_sensor(o, sensor_length,
++ num_of_sensors, caps, b);
++ if (ret)
++ continue;
+
-+ if (o->data.blocks[b].caps == NULL) {
-+ ret = -ENOMEM;
-+ goto abort;
-+ }
+ o->caps_block_id = b;
-+ for (s = 0; s < o->data.blocks[b].num_of_sensors; s++) {
-+ o->data.blocks[b].caps[s].curr_powercap = d[dnum] << 8;
-+ o->data.blocks[b].caps[s].curr_powercap = o->data.blocks[b].caps[s].curr_powercap | d[dnum+1];
-+ o->data.blocks[b].caps[s].curr_powerreading = d[dnum+2] << 8;
-+ o->data.blocks[b].caps[s].curr_powerreading = o->data.blocks[b].caps[s].curr_powerreading | d[dnum+3];
-+ o->data.blocks[b].caps[s].norm_powercap = d[dnum+4] << 8;
-+ o->data.blocks[b].caps[s].norm_powercap = o->data.blocks[b].caps[s].norm_powercap | d[dnum+5];
-+ o->data.blocks[b].caps[s].max_powercap = d[dnum+6] << 8;
-+ o->data.blocks[b].caps[s].max_powercap = o->data.blocks[b].caps[s].max_powercap| d[dnum+7];
-+ o->data.blocks[b].caps[s].min_powercap = d[dnum+8] << 8;
-+ o->data.blocks[b].caps[s].min_powercap = o->data.blocks[b].caps[s].min_powercap| d[dnum+9];
-+ o->data.blocks[b].caps[s].user_powerlimit = d[dnum+10] << 8;
-+ o->data.blocks[b].caps[s].user_powerlimit = o->data.blocks[b].caps[s].user_powerlimit| d[dnum+11];
-+
-+ dnum = dnum + o->data.blocks[b].sensor_length;
-+ //printk("CAPS sensor #%d:\n", s);
-+ //printk("curr_powercap is %x \n", o->data.blocks[b].caps[s].curr_powercap);
-+ //printk("curr_powerreading is %x \n", o->data.blocks[b].caps[s].curr_powerreading);
-+ //printk("norm_powercap is %x \n", o->data.blocks[b].caps[s].norm_powercap);
-+ //printk("max_powercap is %x \n", o->data.blocks[b].caps[s].max_powercap);
-+ //printk("min_powercap is %x \n", o->data.blocks[b].caps[s].min_powercap);
-+ //printk("user_powerlimit is %x \n", o->data.blocks[b].caps[s].user_powerlimit);
++ for (s = 0; s < num_of_sensors; s++) {
++ c_sensor = &o->blocks[b].caps[s];
++ c_sensor->curr_powercap =
++ (d[dnum] << 8) | d[dnum+1];
++ c_sensor->curr_powerreading =
++ (d[dnum+2] << 8) | d[dnum+3];
++ c_sensor->norm_powercap =
++ (d[dnum+4] << 8) | d[dnum+5];
++ c_sensor->max_powercap =
++ (d[dnum+6] << 8) | d[dnum+7];
++ c_sensor->min_powercap =
++ (d[dnum+8] << 8) | d[dnum+9];
++ c_sensor->user_powerlimit =
++ (d[dnum+10] << 8) | d[dnum+11];
++
++ dnum = dnum + sensor_length;
++ dev_dbg(&client->dev, "CAPS sensor #%d:\n", s);
++ dev_dbg(&client->dev, "curr_powercap is %x\n",
++ c_sensor->curr_powercap);
++ dev_dbg(&client->dev,
++ "curr_powerreading is %x\n",
++ c_sensor->curr_powerreading);
++ dev_dbg(&client->dev, "norm_powercap is %x\n",
++ c_sensor->norm_powercap);
++ dev_dbg(&client->dev, "max_powercap is %x\n",
++ c_sensor->max_powercap);
++ dev_dbg(&client->dev, "min_powercap is %x\n",
++ c_sensor->min_powercap);
++ dev_dbg(&client->dev, "user_powerlimit is %x\n",
++ c_sensor->user_powerlimit);
+ }
+
-+ }
-+ else {
-+ printk("ERROR: sensor type %s not supported\n", o->data.blocks[b].sensor_type);
++ } else {
++ dev_err(&client->dev,
++ "ERROR: sensor type %s not supported\n",
++ o->blocks[b].sensor_type);
+ ret = -1;
-+ goto abort;
++ goto err;
+ }
++
++ strncpy(o->blocks[b].sensor_type, sensor_type, 4);
++ o->blocks[b].sensor_format = sensor_format;
++ o->blocks[b].sensor_length = sensor_length;
++ o->blocks[b].num_of_sensors = num_of_sensors;
+ }
+
+ return 0;
-+abort:
++err:
+ deinit_occ_resp_buf(o);
+ return ret;
+}
+
-+/* used for testing */
-+char fake_occ_rsp[OCC_DATA_MAX] = {
-+0x69, 0x00, 0x00, 0x00, 0xa4, 0xc3, 0x00, 0x03, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+0x00, 0x00, 0x00, 0x00, 0x00, 0x6f, 0x70, 0x5f, 0x6f, 0x63, 0x63, 0x5f, 0x31, 0x35, 0x30, 0x37,
-+0x31, 0x36, 0x61, 0x00, 0x00, 0x53, 0x45, 0x4e, 0x53, 0x4f, 0x52, 0x04, 0x01, 0x54, 0x45, 0x4d,
-+0x50, 0x00, 0x01, 0x04, 0x0a, 0x00 ,0x6a, 0x00, 0x00, 0x00, 0x6c, 0x00, 0x00, 0x00, 0x6d, 0x00,
-+0x00,0x00,0x6e,0x00, 0x00,0x00,0x6f,0x00, 0x00,0x00,0x70,0x00, 0x00,0x00,0x71,0x00,
-+0x00,0x00,0x73,0x00, 0x00,0x00,0x74,0x00, 0x00,0x00,0x75,0x00, 0x00,0x46,0x52,0x45,
-+0x51,0x00,0x01,0x04, 0x0a,0x00,0x76,0x00, 0x00,0x00,0x78,0x00, 0x00,0x00,0x79,0x00,
-+0x00,0x00,0x7a,0x00, 0x00,0x00,0x7b,0x00, 0x00,0x00,0x7c,0x00, 0x00,0x00,0x7d,0x00,
-+0x00,0x00,0x7f,0x00, 0x00,0x00,0x80,0x00, 0x00,0x00,0x81,0x00, 0x00,0x50,0x4f,0x57,
-+0x52,0x00,0x01,0x0c, 0x00,0x43,0x41,0x50, 0x53,0x00,0x01,0x0c, 0x01,0x00,0x00,0x00,
-+0x00,0x04,0xb0,0x09, 0x60,0x04,0x4c,0x00, 0x00,0x17,0xc5,};
-+
-+//#define DUMP_RAW 1
-+
-+static int occ_get_all(struct i2c_client *client, occ_response_t *occ_resp)
++static int occ_get_all(struct i2c_client *client, struct occ_response *occ_resp)
+{
-+ char occ_data[OCC_DATA_MAX];
-+ uint16_t num_bytes = 0;
-+ int b = 0;
-+ int ret = 0;
-+/*
-+ //Procedure to access SRAM where OCC data is located
-+ occ_putscom(client, SCOM_OCC_SRAM_WOX, 0x08000000, 0x00000000);
-+ occ_putscom(client, SCOM_OCC_SRAM_WAND, 0xFBFFFFFF, 0xFFFFFFFF);
-+ occ_putscom(client, SCOM_OCC_SRAM_ADDR, OCC_RESPONSE_ADDR, 0x00000000);
-+ occ_putscom(client, SCOM_OCC_SRAM_ADDR, OCC_RESPONSE_ADDR, 0x00000000);
-+
-+ occ_getscomb(client, SCOM_OCC_SRAM_DATA, occ_data, 0);
-+
-+*/
++ uint8_t occ_data[OCC_DATA_MAX];
++ uint16_t num_bytes;
++ int b;
++ int ret;
+
-+ // Init OCB
++ /* Init OCB */
+ occ_putscom(client, OCB_STATUS_CONTROL_OR, 0x08000000, 0x00000000);
+ occ_putscom(client, OCB_STATUS_CONTROL_AND, 0xFBFFFFFF, 0xFFFFFFFF);
+
-+ // Send poll command to OCC
++ /* Send poll command to OCC */
+ occ_putscom(client, OCB_ADDRESS, OCC_COMMAND_ADDR, 0x00000000);
+ occ_putscom(client, OCB_ADDRESS, OCC_COMMAND_ADDR, 0x00000000);
+ occ_putscom(client, OCB_DATA, 0x00000001, 0x10001100);
+
-+ // Trigger ATTN
++ /* Trigger ATTN */
+ occ_putscom(client, ATTN_DATA, 0x01010000, 0x00000000);
+
-+ // TODO: check command status Refere to
-+ // "1.6.2 OCC Command/Response Sequence" in OCC_OpenPwr_FW_Interfaces1.2.pdf
-+ // Use sleep as workaround
-+ //msleep(2000);
-+
-+ // Get response data
++ /* Get response data */
+ occ_putscom(client, OCB_ADDRESS, OCC_RESPONSE_ADDR, 0x00000000);
+ occ_getscomb(client, OCB_DATA, occ_data, 0);
+
-+ /* FIXME: use fake data to test driver without hw */
-+ //printk("i2c-occ: using FAKE occ data\n");
-+ //memcpy(&occ_data[0], &fake_occ_rsp[0], sizeof(occ_data));
-+
+ num_bytes = get_occdata_length(occ_data);
+
-+ //printk("OCC data length: %d\n", num_bytes);
-+
-+#ifdef DUMP_RAW
-+ int i = 0;
-+ printk("\nRAW data\n==================\n");
-+ for (i = 0; i < 8; i++) {
-+ if(i == 4) printk(" ");
-+ printk("%02x", occ_data[i]);
-+ }
-+ printk("\n");
-+#endif
++ dev_dbg(&client->dev, "OCC data length: %d\n", num_bytes);
+
+ if (num_bytes > OCC_DATA_MAX) {
-+ printk("ERROR: OCC data length must be < 4KB\n");
++ dev_err(&client->dev, "ERROR: OCC data length must be < 4KB\n");
+ return -1;
+ }
+
+ if (num_bytes <= 0) {
-+ printk("ERROR: OCC data length is zero\n");
++ dev_err(&client->dev, "ERROR: OCC data length is zero\n");
+ return -1;
+ }
+
-+ for (b = 8; b < num_bytes + 8; b = b + 8) {
-+ //occ_getscomb(client, SCOM_OCC_SRAM_DATA, occ_data, b);
++ for (b = 8; b < num_bytes + 8; b = b + 8)
+ occ_getscomb(client, OCB_DATA, occ_data, b);
-+#ifdef DUMP_RAW
-+ for (i = 0; i < 8; i++) {
-+ if(i == 4) printk(" ");
-+ printk("%02x", occ_data[b+i]);
-+ }
-+ printk("\n");
-+#endif
-+
-+ }
+
-+ /* FIXME: use fake data to test driver without hw */
-+ //memcpy(&occ_data[0], &fake_occ_rsp[0], sizeof(occ_data));
-+
-+ ret = parse_occ_response(occ_data, occ_resp);
++ ret = parse_occ_response(client, occ_data, occ_resp);
+
+ return ret;
+}
@@ -632,405 +625,257 @@ index 0000000..f265ff3
+
+ mutex_lock(&data->update_lock);
+
-+ if (time_after(jiffies, data->last_updated + data->sample_time)
++ if (time_after(jiffies, data->last_updated + data->update_interval)
+ || !data->valid) {
-+ deinit_occ_resp_buf(&data->occ_resp);
-+
++ data->valid = 1;
+ ret = occ_get_all(client, &data->occ_resp);
-+
++ if (ret)
++ data->valid = 0;
+ data->last_updated = jiffies;
-+ data->valid = 1;
+ }
+ mutex_unlock(&data->update_lock);
+
+ return ret;
+}
+
-+/* ----------------------------------------------------------------------*/
-+/* sysfs attributes for hwmon */
+
-+static ssize_t show_occ_temp_input(struct device *hwmon_dev, struct device_attribute *da, char *buf)
++static void* occ_get_sensor(struct device *hwmon_dev, enum sensor_t t)
+{
-+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
-+ int n = attr->index;
-+ struct device * dev = hwmon_dev->parent;
++ struct device *dev = hwmon_dev->parent;
+ struct occ_drv_data *data = dev_get_drvdata(dev);
-+ int ret = 0;
-+ occ_sensor *sensor;
-+ int val = 0;
++ int ret;
++ void *sensor;
+
+ ret = occ_update_device(dev);
-+
-+ if (ret != 0)
-+ {
-+ /* FIXME: to test fake data */
-+ printk("ERROR: cannot get occ sensor data: %d\n", ret);
-+ return ret;
++ if (ret != 0) {
++ dev_err(dev, "ERROR: cannot get occ sensor data: %d\n", ret);
++ return NULL;
+ }
+
-+ if (data->occ_resp.data.blocks == NULL ||
-+ data->occ_resp.data.blocks[data->occ_resp.temp_block_id].sensor == NULL)
-+ return -1;
-+
-+ //printk("block_id: %d, sensor: %d\n", data->occ_resp.temp_block_id, n -1);
-+ sensor = &data->occ_resp.data.blocks[data->occ_resp.temp_block_id].sensor[n - 1];
-+ /* in millidegree Celsius */
-+ val = sensor->value * 1000;
-+ //printk("temp%d sensor value: %d\n", n, val);
++ if (!data->occ_resp.blocks)
++ return NULL;
++
++ switch (t) {
++ case temp:
++ sensor = data->occ_resp.temp_block_id == -1 ? NULL :
++ data->occ_resp.blocks[data->occ_resp.temp_block_id].sensor;
++ break;
++ case freq:
++ sensor = data->occ_resp.freq_block_id == -1 ? NULL :
++ data->occ_resp.blocks[data->occ_resp.freq_block_id].sensor;
++ break;
++ case power:
++ sensor = data->occ_resp.power_block_id == -1 ? NULL :
++ data->occ_resp.blocks[data->occ_resp.power_block_id].power;
++ break;
++ case caps:
++ sensor = data->occ_resp.caps_block_id == -1 ? NULL :
++ data->occ_resp.blocks[data->occ_resp.caps_block_id].caps;
++ break;
++ default:
++ sensor = NULL;
++ break;
++ }
+
-+ //printk("------------- above are debug message, bellow is real output------------\n");
-+ return sprintf(buf, "%d\n", val);
++ return sensor;
+}
+
-+static ssize_t show_occ_temp_label(struct device *hwmon_dev, struct device_attribute *da, char *buf)
++/* sysfs attributes for hwmon */
++static ssize_t show_occ_temp_input(struct device *hwmon_dev,
++ struct device_attribute *da, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int n = attr->index;
-+ struct device *dev = hwmon_dev->parent;
-+ struct occ_drv_data *data = dev_get_drvdata(dev);
-+ int ret = 0;
-+ occ_sensor *sensor;
-+ int val = 0;
++ struct occ_sensor *sensor;
++ int val;
+
-+ ret = occ_update_device(dev);
++ sensor = occ_get_sensor(hwmon_dev, temp);
++ if (!sensor)
++ val = -1;
++ else
++ /* in millidegree Celsius */
++ val = sensor[n].value * 1000;
+
-+ if (ret != 0)
-+ {
-+ /* FIXME: to test fake data */
-+ printk("ERROR: cannot get occ sensor data: %d\n", ret);
-+ return ret;
-+ }
-+
-+ if (data->occ_resp.data.blocks == NULL ||
-+ data->occ_resp.data.blocks[data->occ_resp.temp_block_id].sensor == NULL)
-+ return -1;
-+
-+ //printk("temp_block_id: %d, sensor: %d\n", data->occ_resp.temp_block_id, n -1);
-+ sensor = &data->occ_resp.data.blocks[data->occ_resp.temp_block_id].sensor[n - 1];
-+ val = sensor->sensor_id;
-+ //printk("temp%d sensor id: %d\n", n, val);
-+
-+ //printk("------------- above are debug message, bellow is real output------------\n");
+ return sprintf(buf, "%d\n", val);
+}
+
-+static ssize_t show_occ_power_label(struct device *hwmon_dev, struct device_attribute *da, char *buf)
++static ssize_t show_occ_temp_label(struct device *hwmon_dev,
++ struct device_attribute *da, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int n = attr->index;
-+ struct device *dev = hwmon_dev->parent;
-+ struct occ_drv_data *data = dev_get_drvdata(dev);
-+ int ret = 0;
-+ powr_sensor *sensor;
-+ int val = 0;
-+
-+ ret = occ_update_device(dev);
-+
-+ if (ret != 0)
-+ {
-+ /* FIXME: to test fake data */
-+ printk("ERROR: cannot get occ sensor data: %d\n", ret);
-+ return ret;
-+ }
-+
-+ //printk("power_block_id: %d, sensor: %d\n", data->occ_resp.power_block_id, n -1);
-+
-+ if (data->occ_resp.data.blocks == NULL ||
-+ data->occ_resp.data.blocks[data->occ_resp.power_block_id].powr == NULL)
-+ return -1;
++ struct occ_sensor *sensor;
++ int val;
+
-+ sensor = &data->occ_resp.data.blocks[data->occ_resp.power_block_id].powr[n - 1];
-+ val = sensor->sensor_id;
-+ //printk("power%d sensor id: %d\n", n, val);
++ sensor = occ_get_sensor(hwmon_dev, temp);
++ if (!sensor)
++ val = -1;
++ else
++ val = sensor[n].sensor_id;
+
-+ //printk("------------- above are debug message, bellow is real output------------\n");
+ return sprintf(buf, "%d\n", val);
+}
+
-+
-+static ssize_t show_occ_power_input(struct device *hwmon_dev, struct device_attribute *da, char *buf)
++static ssize_t show_occ_power_label(struct device *hwmon_dev,
++ struct device_attribute *da, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int n = attr->index;
-+ struct device *dev = hwmon_dev->parent;
-+ struct occ_drv_data *data = dev_get_drvdata(dev);
-+ int ret = 0;
-+ powr_sensor *sensor;
-+ int val = 0;
++ struct power_sensor *sensor;
++ int val;
+
-+ ret = occ_update_device(dev);
-+
-+ if (ret != 0)
-+ {
-+ /* FIXME: to test fake data */
-+ printk("ERROR: cannot get occ sensor data: %d\n", ret);
-+ return ret;
-+ }
++ sensor = occ_get_sensor(hwmon_dev, power);
++ if (!sensor)
++ val = -1;
++ else
++ val = sensor[n].sensor_id;
+
-+ //printk("power block_id: %d, sensor: %d\n", data->occ_resp.power_block_id, n -1);
++ return sprintf(buf, "%d\n", val);
++}
+
-+ if (data->occ_resp.data.blocks == NULL ||
-+ data->occ_resp.data.blocks[data->occ_resp.power_block_id].powr == NULL)
-+ return -1;
+
++static ssize_t show_occ_power_input(struct device *hwmon_dev,
++ struct device_attribute *da, char *buf)
++{
++ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
++ int n = attr->index;
++ struct power_sensor *sensor;
++ int val;
+
-+ sensor = &data->occ_resp.data.blocks[data->occ_resp.power_block_id].powr[n - 1];
-+ val = sensor->value;
-+ //printk("power%d sensor value: %d\n", n, val);
++ sensor = occ_get_sensor(hwmon_dev, power);
++ if (!sensor)
++ val = -1;
++ else
++ val = sensor[n].value;
+
-+ //printk("------------- above are debug message, bellow is real output------------\n");
+ return sprintf(buf, "%d\n", val);
+}
+
+
-+static ssize_t show_occ_freq_label(struct device *hwmon_dev, struct device_attribute *da, char *buf)
++static ssize_t show_occ_freq_label(struct device *hwmon_dev,
++ struct device_attribute *da, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int n = attr->index;
-+ struct device *dev = hwmon_dev->parent;
-+ struct occ_drv_data *data = dev_get_drvdata(dev);
-+ int ret = 0;
-+ occ_sensor *sensor;
-+ int val = 0;
-+
-+ ret = occ_update_device(dev);
++ struct occ_sensor *sensor;
++ int val;
+
-+ if (ret != 0)
-+ {
-+ /* FIXME: to test fake data */
-+ printk("ERROR: cannot get occ sensor data: %d\n", ret);
-+ return ret;
-+ }
++ sensor = occ_get_sensor(hwmon_dev, freq);
++ if (!sensor)
++ val = -1;
++ else
++ val = sensor[n].sensor_id;
+
-+ if (data->occ_resp.data.blocks == NULL ||
-+ data->occ_resp.data.blocks[data->occ_resp.freq_block_id].sensor == NULL)
-+ return -1;
-+
-+ //printk("freq_block_id: %d, sensor: %d\n", data->occ_resp.freq_block_id, n -1);
-+ sensor = &data->occ_resp.data.blocks[data->occ_resp.freq_block_id].sensor[n - 1];
-+ val = sensor->sensor_id;
-+ //printk("freq%d sensor id: %d\n", n, val);
-+
-+ //printk("------------- above are debug message, bellow is real output------------\n");
+ return sprintf(buf, "%d\n", val);
+}
+
+
-+static ssize_t show_occ_freq_input(struct device *hwmon_dev, struct device_attribute *da, char *buf)
++static ssize_t show_occ_freq_input(struct device *hwmon_dev,
++ struct device_attribute *da, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int n = attr->index;
-+ struct device *dev = hwmon_dev->parent;
-+ struct occ_drv_data *data = dev_get_drvdata(dev);
-+ int ret = 0;
-+ occ_sensor *sensor;
-+ int val = 0;
-+
-+ ret = occ_update_device(dev);
++ struct occ_sensor *sensor;
++ int val;
+
-+ if (ret != 0)
-+ {
-+ /* FIXME: to test fake data */
-+ printk("ERROR: cannot get occ sensor data: %d\n", ret);
-+ return ret;
-+ }
-+
-+ if (data->occ_resp.data.blocks == NULL ||
-+ data->occ_resp.data.blocks[data->occ_resp.freq_block_id].sensor == NULL)
-+ return -1;
++ sensor = occ_get_sensor(hwmon_dev, freq);
++ if (!sensor)
++ val = -1;
++ else
++ val = sensor[n].value;
+
-+ //printk("block_id: %d, sensor: %d\n", data->occ_resp.freq_block_id, n -1);
-+ sensor = &data->occ_resp.data.blocks[data->occ_resp.freq_block_id].sensor[n - 1];
-+ val = sensor->value;
-+ //printk("freq%d sensor value: %d\n", n, val);
-+
-+ //printk("------------- above are debug message, bellow is real output------------\n");
+ return sprintf(buf, "%d\n", val);
+}
+
-+static ssize_t show_occ_caps(struct device *hwmon_dev, struct device_attribute *da, char *buf)
++static ssize_t show_occ_caps(struct device *hwmon_dev,
++ struct device_attribute *da, char *buf)
+{
+ struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(da);
+ int nr = attr->nr;
+ int n = attr->index;
-+ struct device *dev = hwmon_dev->parent;
-+ struct occ_drv_data *data = dev_get_drvdata(dev);
-+ int ret = 0;
-+ caps_sensor *sensor;
-+ int val = 0;
++ struct caps_sensor *sensor;
++ int val;
+
-+ ret = occ_update_device(dev);
-+ if (ret != 0)
-+ {
-+ /* FIXME: to test fake data */
-+ printk("ERROR: cannot get occ sensor data: %d\n", ret);
-+ return ret;
++ sensor = occ_get_sensor(hwmon_dev, caps);
++ if (!sensor) {
++ val = -1;
++ return sprintf(buf, "%d\n", val);
+ }
+
-+ //printk("block_id: %d, sensor: %d, nr: %d\n", data->occ_resp.caps_block_id, n - 1, nr);
-+ if (data->occ_resp.data.blocks == NULL ||
-+ data->occ_resp.data.blocks[data->occ_resp.caps_block_id].caps == NULL)
-+ return -1;
-+
-+ sensor = &data->occ_resp.data.blocks[data->occ_resp.caps_block_id].caps[n - 1];
-+
+ switch (nr) {
-+ case 0:
-+ val = sensor->curr_powercap;
-+ break;
-+ case 1:
-+ val = sensor->curr_powerreading;
-+ break;
-+ case 2:
-+ val = sensor->norm_powercap;
-+ break;
-+ case 3:
-+ val = sensor->max_powercap;
-+ break;
-+ case 4:
-+ val = sensor->min_powercap;
-+ break;
-+ case 5:
-+ val = sensor->user_powerlimit;
-+ break;
-+ default:
-+ val = 0;
++ case 0:
++ val = sensor[n].curr_powercap;
++ break;
++ case 1:
++ val = sensor[n].curr_powerreading;
++ break;
++ case 2:
++ val = sensor[n].norm_powercap;
++ break;
++ case 3:
++ val = sensor[n].max_powercap;
++ break;
++ case 4:
++ val = sensor[n].min_powercap;
++ break;
++ case 5:
++ val = sensor[n].user_powerlimit;
++ break;
++ default:
++ val = -1;
+ }
+
-+ //printk("caps%d sensor value: %d, nr: %d\n", n, val, nr);
-+
-+ //printk("------------- above are debug message, bellow is real output------------\n");
+ return sprintf(buf, "%d\n", val);
+}
+
-+#if 0
-+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_occ_temp_input, NULL, 1);
-+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_occ_temp_input, NULL, 2);
-+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_occ_temp_input, NULL, 3);
-+static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_occ_temp_input, NULL, 4);
-+static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_occ_temp_input, NULL, 5);
-+static SENSOR_DEVICE_ATTR(temp6_input, S_IRUGO, show_occ_temp_input, NULL, 6);
-+static SENSOR_DEVICE_ATTR(temp7_input, S_IRUGO, show_occ_temp_input, NULL, 7);
-+static SENSOR_DEVICE_ATTR(temp8_input, S_IRUGO, show_occ_temp_input, NULL, 8);
-+static SENSOR_DEVICE_ATTR(temp9_input, S_IRUGO, show_occ_temp_input, NULL, 9);
-+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_occ_temp_label, NULL, 1);
-+static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_occ_temp_label, NULL, 2);
-+static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, show_occ_temp_label, NULL, 3);
-+static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, show_occ_temp_label, NULL, 4);
-+static SENSOR_DEVICE_ATTR(temp5_label, S_IRUGO, show_occ_temp_label, NULL, 5);
-+static SENSOR_DEVICE_ATTR(temp6_label, S_IRUGO, show_occ_temp_label, NULL, 6);
-+static SENSOR_DEVICE_ATTR(temp7_label, S_IRUGO, show_occ_temp_label, NULL, 7);
-+static SENSOR_DEVICE_ATTR(temp8_label, S_IRUGO, show_occ_temp_label, NULL, 8);
-+static SENSOR_DEVICE_ATTR(temp9_label, S_IRUGO, show_occ_temp_label, NULL, 9);
-+
-+static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, show_occ_power_input, NULL, 1);
-+static SENSOR_DEVICE_ATTR(power1_label, S_IRUGO, show_occ_power_label, NULL, 1);
-+static SENSOR_DEVICE_ATTR(power2_input, S_IRUGO, show_occ_power_input, NULL, 2);
-+static SENSOR_DEVICE_ATTR(power2_label, S_IRUGO, show_occ_power_label, NULL, 2);
-+static SENSOR_DEVICE_ATTR(power3_input, S_IRUGO, show_occ_power_input, NULL, 3);
-+static SENSOR_DEVICE_ATTR(power3_label, S_IRUGO, show_occ_power_label, NULL, 3);
-+static SENSOR_DEVICE_ATTR(power4_input, S_IRUGO, show_occ_power_input, NULL, 4);
-+static SENSOR_DEVICE_ATTR(power4_label, S_IRUGO, show_occ_power_label, NULL, 4);
-+
-+static SENSOR_DEVICE_ATTR(freq1_input, S_IRUGO, show_occ_freq_input, NULL, 1);
-+static SENSOR_DEVICE_ATTR(freq1_label, S_IRUGO, show_occ_freq_label, NULL, 1);
-+static SENSOR_DEVICE_ATTR(freq2_input, S_IRUGO, show_occ_freq_input, NULL, 2);
-+static SENSOR_DEVICE_ATTR(freq2_label, S_IRUGO, show_occ_freq_label, NULL, 2);
-+static SENSOR_DEVICE_ATTR(freq3_input, S_IRUGO, show_occ_freq_input, NULL, 3);
-+static SENSOR_DEVICE_ATTR(freq3_label, S_IRUGO, show_occ_freq_label, NULL, 3);
-+static SENSOR_DEVICE_ATTR(freq4_input, S_IRUGO, show_occ_freq_input, NULL, 4);
-+static SENSOR_DEVICE_ATTR(freq4_label, S_IRUGO, show_occ_freq_label, NULL, 4);
-+
-+static struct attribute *occ_attrs[] = {
-+ &sensor_dev_attr_temp1_input.dev_attr.attr,
-+ &sensor_dev_attr_temp2_input.dev_attr.attr,
-+ &sensor_dev_attr_temp3_input.dev_attr.attr,
-+ &sensor_dev_attr_temp4_input.dev_attr.attr,
-+ &sensor_dev_attr_temp5_input.dev_attr.attr,
-+ &sensor_dev_attr_temp6_input.dev_attr.attr,
-+ &sensor_dev_attr_temp7_input.dev_attr.attr,
-+ &sensor_dev_attr_temp8_input.dev_attr.attr,
-+ &sensor_dev_attr_temp9_input.dev_attr.attr,
-+ &sensor_dev_attr_temp1_label.dev_attr.attr,
-+ &sensor_dev_attr_temp2_label.dev_attr.attr,
-+ &sensor_dev_attr_temp3_label.dev_attr.attr,
-+ &sensor_dev_attr_temp4_label.dev_attr.attr,
-+ &sensor_dev_attr_temp5_label.dev_attr.attr,
-+ &sensor_dev_attr_temp6_label.dev_attr.attr,
-+ &sensor_dev_attr_temp7_label.dev_attr.attr,
-+ &sensor_dev_attr_temp8_label.dev_attr.attr,
-+ &sensor_dev_attr_temp9_label.dev_attr.attr,
-+ &sensor_dev_attr_power1_input.dev_attr.attr,
-+ &sensor_dev_attr_power2_input.dev_attr.attr,
-+ &sensor_dev_attr_power3_input.dev_attr.attr,
-+ &sensor_dev_attr_power4_input.dev_attr.attr,
-+ &sensor_dev_attr_power1_label.dev_attr.attr,
-+ &sensor_dev_attr_power2_label.dev_attr.attr,
-+ &sensor_dev_attr_power3_label.dev_attr.attr,
-+ &sensor_dev_attr_power4_label.dev_attr.attr,
-+ &sensor_dev_attr_freq1_input.dev_attr.attr,
-+ &sensor_dev_attr_freq2_input.dev_attr.attr,
-+ &sensor_dev_attr_freq3_input.dev_attr.attr,
-+ &sensor_dev_attr_freq4_input.dev_attr.attr,
-+ &sensor_dev_attr_freq1_label.dev_attr.attr,
-+ &sensor_dev_attr_freq2_label.dev_attr.attr,
-+ &sensor_dev_attr_freq3_label.dev_attr.attr,
-+ &sensor_dev_attr_freq4_label.dev_attr.attr,
-+
-+ NULL
-+};
-+ATTRIBUTE_GROUPS(occ);
-+
-+#endif
-+
+static struct sensor_device_attribute temp_input[] = {
-+ SENSOR_ATTR(temp1_input, S_IRUGO, show_occ_temp_input, NULL, 1),
-+ SENSOR_ATTR(temp2_input, S_IRUGO, show_occ_temp_input, NULL, 2),
-+ SENSOR_ATTR(temp3_input, S_IRUGO, show_occ_temp_input, NULL, 3),
-+ SENSOR_ATTR(temp4_input, S_IRUGO, show_occ_temp_input, NULL, 4),
-+ SENSOR_ATTR(temp5_input, S_IRUGO, show_occ_temp_input, NULL, 5),
-+ SENSOR_ATTR(temp6_input, S_IRUGO, show_occ_temp_input, NULL, 6),
-+ SENSOR_ATTR(temp7_input, S_IRUGO, show_occ_temp_input, NULL, 7),
-+ SENSOR_ATTR(temp8_input, S_IRUGO, show_occ_temp_input, NULL, 8),
-+ SENSOR_ATTR(temp9_input, S_IRUGO, show_occ_temp_input, NULL, 9),
-+ SENSOR_ATTR(temp10_input, S_IRUGO, show_occ_temp_input, NULL, 10),
-+ SENSOR_ATTR(temp11_input, S_IRUGO, show_occ_temp_input, NULL, 11),
-+ SENSOR_ATTR(temp12_input, S_IRUGO, show_occ_temp_input, NULL, 12),
-+ SENSOR_ATTR(temp13_input, S_IRUGO, show_occ_temp_input, NULL, 13),
-+ SENSOR_ATTR(temp14_input, S_IRUGO, show_occ_temp_input, NULL, 14),
-+ SENSOR_ATTR(temp15_input, S_IRUGO, show_occ_temp_input, NULL, 15),
-+ SENSOR_ATTR(temp16_input, S_IRUGO, show_occ_temp_input, NULL, 16),
-+ SENSOR_ATTR(temp17_input, S_IRUGO, show_occ_temp_input, NULL, 17),
-+ SENSOR_ATTR(temp18_input, S_IRUGO, show_occ_temp_input, NULL, 18),
-+ SENSOR_ATTR(temp19_input, S_IRUGO, show_occ_temp_input, NULL, 19),
-+ SENSOR_ATTR(temp20_input, S_IRUGO, show_occ_temp_input, NULL, 20),
-+ SENSOR_ATTR(temp21_input, S_IRUGO, show_occ_temp_input, NULL, 21),
-+ SENSOR_ATTR(temp22_input, S_IRUGO, show_occ_temp_input, NULL, 22),
++ SENSOR_ATTR(temp1_input, S_IRUGO, show_occ_temp_input, NULL, 0),
++ SENSOR_ATTR(temp2_input, S_IRUGO, show_occ_temp_input, NULL, 1),
++ SENSOR_ATTR(temp3_input, S_IRUGO, show_occ_temp_input, NULL, 2),
++ SENSOR_ATTR(temp4_input, S_IRUGO, show_occ_temp_input, NULL, 3),
++ SENSOR_ATTR(temp5_input, S_IRUGO, show_occ_temp_input, NULL, 4),
++ SENSOR_ATTR(temp6_input, S_IRUGO, show_occ_temp_input, NULL, 5),
++ SENSOR_ATTR(temp7_input, S_IRUGO, show_occ_temp_input, NULL, 6),
++ SENSOR_ATTR(temp8_input, S_IRUGO, show_occ_temp_input, NULL, 7),
++ SENSOR_ATTR(temp9_input, S_IRUGO, show_occ_temp_input, NULL, 8),
++ SENSOR_ATTR(temp10_input, S_IRUGO, show_occ_temp_input, NULL, 9),
++ SENSOR_ATTR(temp11_input, S_IRUGO, show_occ_temp_input, NULL, 10),
++ SENSOR_ATTR(temp12_input, S_IRUGO, show_occ_temp_input, NULL, 11),
++ SENSOR_ATTR(temp13_input, S_IRUGO, show_occ_temp_input, NULL, 12),
++ SENSOR_ATTR(temp14_input, S_IRUGO, show_occ_temp_input, NULL, 13),
++ SENSOR_ATTR(temp15_input, S_IRUGO, show_occ_temp_input, NULL, 14),
++ SENSOR_ATTR(temp16_input, S_IRUGO, show_occ_temp_input, NULL, 15),
++ SENSOR_ATTR(temp17_input, S_IRUGO, show_occ_temp_input, NULL, 16),
++ SENSOR_ATTR(temp18_input, S_IRUGO, show_occ_temp_input, NULL, 17),
++ SENSOR_ATTR(temp19_input, S_IRUGO, show_occ_temp_input, NULL, 18),
++ SENSOR_ATTR(temp20_input, S_IRUGO, show_occ_temp_input, NULL, 19),
++ SENSOR_ATTR(temp21_input, S_IRUGO, show_occ_temp_input, NULL, 20),
++ SENSOR_ATTR(temp22_input, S_IRUGO, show_occ_temp_input, NULL, 21),
+};
+
+static struct sensor_device_attribute temp_label[] = {
-+ SENSOR_ATTR(temp1_label, S_IRUGO, show_occ_temp_label, NULL, 1),
-+ SENSOR_ATTR(temp2_label, S_IRUGO, show_occ_temp_label, NULL, 2),
-+ SENSOR_ATTR(temp3_label, S_IRUGO, show_occ_temp_label, NULL, 3),
-+ SENSOR_ATTR(temp4_label, S_IRUGO, show_occ_temp_label, NULL, 4),
-+ SENSOR_ATTR(temp5_label, S_IRUGO, show_occ_temp_label, NULL, 5),
-+ SENSOR_ATTR(temp6_label, S_IRUGO, show_occ_temp_label, NULL, 6),
-+ SENSOR_ATTR(temp7_label, S_IRUGO, show_occ_temp_label, NULL, 7),
-+ SENSOR_ATTR(temp8_label, S_IRUGO, show_occ_temp_label, NULL, 8),
-+ SENSOR_ATTR(temp9_label, S_IRUGO, show_occ_temp_label, NULL, 9),
-+ SENSOR_ATTR(temp10_label, S_IRUGO, show_occ_temp_label, NULL, 10),
-+ SENSOR_ATTR(temp11_label, S_IRUGO, show_occ_temp_label, NULL, 11),
-+ SENSOR_ATTR(temp12_label, S_IRUGO, show_occ_temp_label, NULL, 12),
-+ SENSOR_ATTR(temp13_label, S_IRUGO, show_occ_temp_label, NULL, 13),
-+ SENSOR_ATTR(temp14_label, S_IRUGO, show_occ_temp_label, NULL, 14),
-+ SENSOR_ATTR(temp15_label, S_IRUGO, show_occ_temp_label, NULL, 15),
-+ SENSOR_ATTR(temp16_label, S_IRUGO, show_occ_temp_label, NULL, 16),
-+ SENSOR_ATTR(temp17_label, S_IRUGO, show_occ_temp_label, NULL, 17),
-+ SENSOR_ATTR(temp18_label, S_IRUGO, show_occ_temp_label, NULL, 18),
-+ SENSOR_ATTR(temp19_label, S_IRUGO, show_occ_temp_label, NULL, 19),
-+ SENSOR_ATTR(temp20_label, S_IRUGO, show_occ_temp_label, NULL, 20),
-+ SENSOR_ATTR(temp21_label, S_IRUGO, show_occ_temp_label, NULL, 21),
-+ SENSOR_ATTR(temp22_label, S_IRUGO, show_occ_temp_label, NULL, 22),
++ SENSOR_ATTR(temp1_label, S_IRUGO, show_occ_temp_label, NULL, 0),
++ SENSOR_ATTR(temp2_label, S_IRUGO, show_occ_temp_label, NULL, 1),
++ SENSOR_ATTR(temp3_label, S_IRUGO, show_occ_temp_label, NULL, 2),
++ SENSOR_ATTR(temp4_label, S_IRUGO, show_occ_temp_label, NULL, 3),
++ SENSOR_ATTR(temp5_label, S_IRUGO, show_occ_temp_label, NULL, 4),
++ SENSOR_ATTR(temp6_label, S_IRUGO, show_occ_temp_label, NULL, 5),
++ SENSOR_ATTR(temp7_label, S_IRUGO, show_occ_temp_label, NULL, 6),
++ SENSOR_ATTR(temp8_label, S_IRUGO, show_occ_temp_label, NULL, 7),
++ SENSOR_ATTR(temp9_label, S_IRUGO, show_occ_temp_label, NULL, 8),
++ SENSOR_ATTR(temp10_label, S_IRUGO, show_occ_temp_label, NULL, 9),
++ SENSOR_ATTR(temp11_label, S_IRUGO, show_occ_temp_label, NULL, 10),
++ SENSOR_ATTR(temp12_label, S_IRUGO, show_occ_temp_label, NULL, 11),
++ SENSOR_ATTR(temp13_label, S_IRUGO, show_occ_temp_label, NULL, 12),
++ SENSOR_ATTR(temp14_label, S_IRUGO, show_occ_temp_label, NULL, 13),
++ SENSOR_ATTR(temp15_label, S_IRUGO, show_occ_temp_label, NULL, 14),
++ SENSOR_ATTR(temp16_label, S_IRUGO, show_occ_temp_label, NULL, 15),
++ SENSOR_ATTR(temp17_label, S_IRUGO, show_occ_temp_label, NULL, 16),
++ SENSOR_ATTR(temp18_label, S_IRUGO, show_occ_temp_label, NULL, 17),
++ SENSOR_ATTR(temp19_label, S_IRUGO, show_occ_temp_label, NULL, 18),
++ SENSOR_ATTR(temp20_label, S_IRUGO, show_occ_temp_label, NULL, 19),
++ SENSOR_ATTR(temp21_label, S_IRUGO, show_occ_temp_label, NULL, 20),
++ SENSOR_ATTR(temp22_label, S_IRUGO, show_occ_temp_label, NULL, 21),
+
+};
+
@@ -1093,29 +938,29 @@ index 0000000..f265ff3
+
+
+static struct sensor_device_attribute freq_input[] = {
-+ SENSOR_ATTR(freq1_input, S_IRUGO, show_occ_freq_input, NULL, 1),
-+ SENSOR_ATTR(freq2_input, S_IRUGO, show_occ_freq_input, NULL, 2),
-+ SENSOR_ATTR(freq3_input, S_IRUGO, show_occ_freq_input, NULL, 3),
-+ SENSOR_ATTR(freq4_input, S_IRUGO, show_occ_freq_input, NULL, 4),
-+ SENSOR_ATTR(freq5_input, S_IRUGO, show_occ_freq_input, NULL, 5),
-+ SENSOR_ATTR(freq6_input, S_IRUGO, show_occ_freq_input, NULL, 6),
-+ SENSOR_ATTR(freq7_input, S_IRUGO, show_occ_freq_input, NULL, 7),
-+ SENSOR_ATTR(freq8_input, S_IRUGO, show_occ_freq_input, NULL, 8),
-+ SENSOR_ATTR(freq9_input, S_IRUGO, show_occ_freq_input, NULL, 9),
-+ SENSOR_ATTR(freq10_input, S_IRUGO, show_occ_freq_input, NULL, 10),
++ SENSOR_ATTR(freq1_input, S_IRUGO, show_occ_freq_input, NULL, 0),
++ SENSOR_ATTR(freq2_input, S_IRUGO, show_occ_freq_input, NULL, 1),
++ SENSOR_ATTR(freq3_input, S_IRUGO, show_occ_freq_input, NULL, 2),
++ SENSOR_ATTR(freq4_input, S_IRUGO, show_occ_freq_input, NULL, 3),
++ SENSOR_ATTR(freq5_input, S_IRUGO, show_occ_freq_input, NULL, 4),
++ SENSOR_ATTR(freq6_input, S_IRUGO, show_occ_freq_input, NULL, 5),
++ SENSOR_ATTR(freq7_input, S_IRUGO, show_occ_freq_input, NULL, 6),
++ SENSOR_ATTR(freq8_input, S_IRUGO, show_occ_freq_input, NULL, 7),
++ SENSOR_ATTR(freq9_input, S_IRUGO, show_occ_freq_input, NULL, 8),
++ SENSOR_ATTR(freq10_input, S_IRUGO, show_occ_freq_input, NULL, 9),
+};
+
+static struct sensor_device_attribute freq_label[] = {
-+ SENSOR_ATTR(freq1_label, S_IRUGO, show_occ_freq_label, NULL, 1),
-+ SENSOR_ATTR(freq2_label, S_IRUGO, show_occ_freq_label, NULL, 2),
-+ SENSOR_ATTR(freq3_label, S_IRUGO, show_occ_freq_label, NULL, 3),
-+ SENSOR_ATTR(freq4_label, S_IRUGO, show_occ_freq_label, NULL, 4),
-+ SENSOR_ATTR(freq5_label, S_IRUGO, show_occ_freq_label, NULL, 5),
-+ SENSOR_ATTR(freq6_label, S_IRUGO, show_occ_freq_label, NULL, 6),
-+ SENSOR_ATTR(freq7_label, S_IRUGO, show_occ_freq_label, NULL, 7),
-+ SENSOR_ATTR(freq8_label, S_IRUGO, show_occ_freq_label, NULL, 8),
-+ SENSOR_ATTR(freq9_label, S_IRUGO, show_occ_freq_label, NULL, 9),
-+ SENSOR_ATTR(freq10_label, S_IRUGO, show_occ_freq_label, NULL, 10),
++ SENSOR_ATTR(freq1_label, S_IRUGO, show_occ_freq_label, NULL, 0),
++ SENSOR_ATTR(freq2_label, S_IRUGO, show_occ_freq_label, NULL, 1),
++ SENSOR_ATTR(freq3_label, S_IRUGO, show_occ_freq_label, NULL, 2),
++ SENSOR_ATTR(freq4_label, S_IRUGO, show_occ_freq_label, NULL, 3),
++ SENSOR_ATTR(freq5_label, S_IRUGO, show_occ_freq_label, NULL, 4),
++ SENSOR_ATTR(freq6_label, S_IRUGO, show_occ_freq_label, NULL, 5),
++ SENSOR_ATTR(freq7_label, S_IRUGO, show_occ_freq_label, NULL, 6),
++ SENSOR_ATTR(freq8_label, S_IRUGO, show_occ_freq_label, NULL, 7),
++ SENSOR_ATTR(freq9_label, S_IRUGO, show_occ_freq_label, NULL, 8),
++ SENSOR_ATTR(freq10_label, S_IRUGO, show_occ_freq_label, NULL, 9),
+
+};
+
@@ -1153,22 +998,24 @@ index 0000000..f265ff3
+};
+
+static struct sensor_device_attribute_2 caps_curr_powercap[] = {
-+ SENSOR_ATTR_2(caps_curr_powercap, S_IRUGO, show_occ_caps, NULL, 0, 1),
++ SENSOR_ATTR_2(caps_curr_powercap, S_IRUGO, show_occ_caps, NULL, 0, 0),
+};
+static struct sensor_device_attribute_2 caps_curr_powerreading[] = {
-+ SENSOR_ATTR_2(caps_curr_powerreading, S_IRUGO, show_occ_caps, NULL, 1, 1),
++ SENSOR_ATTR_2(caps_curr_powerreading, S_IRUGO,
++ show_occ_caps, NULL, 1, 0),
+};
+static struct sensor_device_attribute_2 caps_norm_powercap[] = {
-+ SENSOR_ATTR_2(caps_norm_powercap, S_IRUGO, show_occ_caps, NULL, 2, 1),
++ SENSOR_ATTR_2(caps_norm_powercap, S_IRUGO, show_occ_caps,
++ NULL, 2, 0),
+};
+static struct sensor_device_attribute_2 caps_max_powercap[] = {
-+ SENSOR_ATTR_2(caps_max_powercap, S_IRUGO, show_occ_caps, NULL, 3, 1),
++ SENSOR_ATTR_2(caps_max_powercap, S_IRUGO, show_occ_caps, NULL, 3, 0),
+};
+static struct sensor_device_attribute_2 caps_min_powercap[] = {
-+ SENSOR_ATTR_2(caps_min_powercap, S_IRUGO, show_occ_caps, NULL, 4, 1),
++ SENSOR_ATTR_2(caps_min_powercap, S_IRUGO, show_occ_caps, NULL, 4, 0),
+};
+static struct sensor_device_attribute_2 caps_user_powerlimit[] = {
-+ SENSOR_ATTR_2(caps_user_powerlimit, S_IRUGO, show_occ_caps, NULL, 5, 1),
++ SENSOR_ATTR_2(caps_user_powerlimit, S_IRUGO, show_occ_caps, NULL, 5, 0),
+};
+#define CAPS_UNIT_ATTRS(X) \
+{ &caps_curr_powercap[X].dev_attr.attr, \
@@ -1189,31 +1036,31 @@ index 0000000..f265ff3
+};
+
+static struct sensor_device_attribute power_input[] = {
-+ SENSOR_ATTR(power1_input, S_IRUGO, show_occ_power_input, NULL, 1),
-+ SENSOR_ATTR(power2_input, S_IRUGO, show_occ_power_input, NULL, 2),
-+ SENSOR_ATTR(power3_input, S_IRUGO, show_occ_power_input, NULL, 3),
-+ SENSOR_ATTR(power4_input, S_IRUGO, show_occ_power_input, NULL, 4),
-+ SENSOR_ATTR(power5_input, S_IRUGO, show_occ_power_input, NULL, 5),
-+ SENSOR_ATTR(power6_input, S_IRUGO, show_occ_power_input, NULL, 6),
-+ SENSOR_ATTR(power7_input, S_IRUGO, show_occ_power_input, NULL, 7),
-+ SENSOR_ATTR(power8_input, S_IRUGO, show_occ_power_input, NULL, 8),
-+ SENSOR_ATTR(power9_input, S_IRUGO, show_occ_power_input, NULL, 9),
-+ SENSOR_ATTR(power10_input, S_IRUGO, show_occ_power_input, NULL, 10),
-+ SENSOR_ATTR(power11_input, S_IRUGO, show_occ_power_input, NULL, 11),
++ SENSOR_ATTR(power1_input, S_IRUGO, show_occ_power_input, NULL, 0),
++ SENSOR_ATTR(power2_input, S_IRUGO, show_occ_power_input, NULL, 1),
++ SENSOR_ATTR(power3_input, S_IRUGO, show_occ_power_input, NULL, 2),
++ SENSOR_ATTR(power4_input, S_IRUGO, show_occ_power_input, NULL, 3),
++ SENSOR_ATTR(power5_input, S_IRUGO, show_occ_power_input, NULL, 4),
++ SENSOR_ATTR(power6_input, S_IRUGO, show_occ_power_input, NULL, 5),
++ SENSOR_ATTR(power7_input, S_IRUGO, show_occ_power_input, NULL, 6),
++ SENSOR_ATTR(power8_input, S_IRUGO, show_occ_power_input, NULL, 7),
++ SENSOR_ATTR(power9_input, S_IRUGO, show_occ_power_input, NULL, 8),
++ SENSOR_ATTR(power10_input, S_IRUGO, show_occ_power_input, NULL, 9),
++ SENSOR_ATTR(power11_input, S_IRUGO, show_occ_power_input, NULL, 10),
+};
+
+static struct sensor_device_attribute power_label[] = {
-+ SENSOR_ATTR(power1_label, S_IRUGO, show_occ_power_label, NULL, 1),
-+ SENSOR_ATTR(power2_label, S_IRUGO, show_occ_power_label, NULL, 2),
-+ SENSOR_ATTR(power3_label, S_IRUGO, show_occ_power_label, NULL, 3),
-+ SENSOR_ATTR(power4_label, S_IRUGO, show_occ_power_label, NULL, 4),
-+ SENSOR_ATTR(power5_label, S_IRUGO, show_occ_power_label, NULL, 5),
-+ SENSOR_ATTR(power6_label, S_IRUGO, show_occ_power_label, NULL, 6),
-+ SENSOR_ATTR(power7_label, S_IRUGO, show_occ_power_label, NULL, 7),
-+ SENSOR_ATTR(power8_label, S_IRUGO, show_occ_power_label, NULL, 8),
-+ SENSOR_ATTR(power9_label, S_IRUGO, show_occ_power_label, NULL, 9),
-+ SENSOR_ATTR(power10_label, S_IRUGO, show_occ_power_label, NULL, 10),
-+ SENSOR_ATTR(power11_label, S_IRUGO, show_occ_power_label, NULL, 11),
++ SENSOR_ATTR(power1_label, S_IRUGO, show_occ_power_label, NULL, 0),
++ SENSOR_ATTR(power2_label, S_IRUGO, show_occ_power_label, NULL, 1),
++ SENSOR_ATTR(power3_label, S_IRUGO, show_occ_power_label, NULL, 2),
++ SENSOR_ATTR(power4_label, S_IRUGO, show_occ_power_label, NULL, 3),
++ SENSOR_ATTR(power5_label, S_IRUGO, show_occ_power_label, NULL, 4),
++ SENSOR_ATTR(power6_label, S_IRUGO, show_occ_power_label, NULL, 5),
++ SENSOR_ATTR(power7_label, S_IRUGO, show_occ_power_label, NULL, 6),
++ SENSOR_ATTR(power8_label, S_IRUGO, show_occ_power_label, NULL, 7),
++ SENSOR_ATTR(power9_label, S_IRUGO, show_occ_power_label, NULL, 8),
++ SENSOR_ATTR(power10_label, S_IRUGO, show_occ_power_label, NULL, 9),
++ SENSOR_ATTR(power11_label, S_IRUGO, show_occ_power_label, NULL, 10),
+};
+
+#define POWER_UNIT_ATTRS(X) \
@@ -1251,10 +1098,49 @@ index 0000000..f265ff3
+ { .attrs = occ_power_attr[10] },
+};
+
++static ssize_t show_update_interval(struct device *hwmon_dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct device *dev = hwmon_dev->parent;
++ struct occ_drv_data *data = dev_get_drvdata(dev);
++
++ return sprintf(buf, "%u\n", jiffies_to_msecs(data->update_interval));
++}
++
++static ssize_t set_update_interval(struct device *hwmon_dev,
++ struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ struct device *dev = hwmon_dev->parent;
++ struct occ_drv_data *data = dev_get_drvdata(dev);
++ unsigned long val;
++ int err;
++
++ err = kstrtoul(buf, 10, &val);
++ if (err)
++ return err;
++
++ data->update_interval = msecs_to_jiffies(val);
++ return count;
++}
++static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO,
++ show_update_interval, set_update_interval);
++
++static ssize_t show_name(struct device *hwmon_dev,
++ struct device_attribute *attr, char *buf)
++{
++ return sprintf(buf, "%s\n", OCC_I2C_NAME);
++}
++static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
++
++
+static void occ_remove_sysfs_files(struct device *dev)
+{
+ int i = 0;
+
++ device_remove_file(dev, &dev_attr_update_interval);
++ device_remove_file(dev, &dev_attr_name);
++
+ for (i = 0; i < ARRAY_SIZE(occ_temp_attr_group); i++)
+ sysfs_remove_group(&dev->kobj, &occ_temp_attr_group[i]);
+
@@ -1273,35 +1159,49 @@ index 0000000..f265ff3
+{
+ /* The sensor number varies for different
+ * platform depending on core number. We'd better
-+ * create them dynamically */
-+ struct occ_drv_data *data = dev_get_drvdata(dev);
++ * create them dynamically
++ */
++ struct occ_drv_data *drv_data = dev_get_drvdata(dev);
+ int i = 0;
+ int num_of_sensors = 0;
+ int ret = 0;
++ struct occ_response *rsp = NULL;
+
+ /* get sensor number from occ. */
++ rsp = &drv_data->occ_resp;
++
++ rsp->freq_block_id = -1;
++ rsp->temp_block_id = -1;
++ rsp->power_block_id = -1;
++ rsp->caps_block_id = -1;
++
+ ret = occ_update_device(dev);
-+ if (ret != 0)
-+ {
-+ /* FIXME: to test fake data */
-+ printk("ERROR: cannot get occ sensor data: %d\n", ret);
++ if (ret != 0) {
++ dev_err(dev, "ERROR: cannot get occ sensor data: %d\n", ret);
+ return ret;
+ }
+
-+ if (data->occ_resp.data.blocks == NULL)
++ if (!rsp->blocks)
+ return -1;
+
++ ret = device_create_file(drv_data->hwmon_dev,
++ &dev_attr_name);
++ if (ret)
++ goto error;
++
++ ret = device_create_file(drv_data->hwmon_dev,
++ &dev_attr_update_interval);
++ if (ret)
++ goto error;
++
+ /* temp sensors */
-+ if (data->occ_resp.temp_block_id >= 0)
-+ {
-+ num_of_sensors = data->occ_resp.data.blocks[data->occ_resp.temp_block_id].num_of_sensors;
-+ for (i = 0; i < num_of_sensors; i++)
-+ {
-+ //printk("create temp group: %d\n", i);
-+ //ret = sysfs_create_group(&dev->kobj, &occ_temp_attr_group[i]);
-+ ret = sysfs_create_group(&data->hwmon_dev->kobj, &occ_temp_attr_group[i]);
-+ if (ret)
-+ {
++ if (rsp->temp_block_id >= 0) {
++ num_of_sensors =
++ rsp->blocks[rsp->temp_block_id].num_of_sensors;
++ for (i = 0; i < num_of_sensors; i++) {
++ ret = sysfs_create_group(&drv_data->hwmon_dev->kobj,
++ &occ_temp_attr_group[i]);
++ if (ret) {
+ dev_err(dev, "error create temp sysfs entry\n");
+ goto error;
+ }
@@ -1309,16 +1209,13 @@ index 0000000..f265ff3
+ }
+
+ /* freq sensors */
-+ if (data->occ_resp.freq_block_id >= 0)
-+ {
-+ num_of_sensors = data->occ_resp.data.blocks[data->occ_resp.freq_block_id].num_of_sensors;
-+ for (i = 0; i < num_of_sensors; i++)
-+ {
-+ //printk("create freq group: %d\n", i);
-+ //ret = sysfs_create_group(&dev->kobj, &occ_temp_attr_group[i]);
-+ ret = sysfs_create_group(&data->hwmon_dev->kobj, &occ_freq_attr_group[i]);
-+ if (ret)
-+ {
++ if (rsp->freq_block_id >= 0) {
++ num_of_sensors =
++ rsp->blocks[rsp->freq_block_id].num_of_sensors;
++ for (i = 0; i < num_of_sensors; i++) {
++ ret = sysfs_create_group(&drv_data->hwmon_dev->kobj,
++ &occ_freq_attr_group[i]);
++ if (ret) {
+ dev_err(dev, "error create freq sysfs entry\n");
+ goto error;
+ }
@@ -1326,17 +1223,13 @@ index 0000000..f265ff3
+ }
+
+ /* power sensors */
-+ //printk("power_block_id: %d\n", data->occ_resp.power_block_id);
-+ if (data->occ_resp.power_block_id >= 0)
-+ {
-+ num_of_sensors = data->occ_resp.data.blocks[data->occ_resp.power_block_id].num_of_sensors;
-+ for (i = 0; i < num_of_sensors; i++)
-+ {
-+ //printk("create power group: %d\n", i);
-+ //ret = sysfs_create_group(&dev->kobj, &occ_temp_attr_group[i]);
-+ ret = sysfs_create_group(&data->hwmon_dev->kobj, &occ_power_attr_group[i]);
-+ if (ret)
-+ {
++ if (rsp->power_block_id >= 0) {
++ num_of_sensors =
++ rsp->blocks[rsp->power_block_id].num_of_sensors;
++ for (i = 0; i < num_of_sensors; i++) {
++ ret = sysfs_create_group(&drv_data->hwmon_dev->kobj,
++ &occ_power_attr_group[i]);
++ if (ret) {
+ dev_err(dev, "error create power sysfs entry\n");
+ goto error;
+ }
@@ -1344,17 +1237,13 @@ index 0000000..f265ff3
+ }
+
+ /* caps sensors */
-+ //printk("caps_block_id: %d\n", data->occ_resp.caps_block_id);
-+ if (data->occ_resp.caps_block_id >= 0)
-+ {
-+ num_of_sensors = data->occ_resp.data.blocks[data->occ_resp.caps_block_id].num_of_sensors;
-+ for (i = 0; i < num_of_sensors; i++)
-+ {
-+ //printk("create caps group: %d\n", i);
-+ //ret = sysfs_create_group(&dev->kobj, &occ_temp_attr_group[i]);
-+ ret = sysfs_create_group(&data->hwmon_dev->kobj, &occ_caps_attr_group[i]);
-+ if (ret)
-+ {
++ if (rsp->caps_block_id >= 0) {
++ num_of_sensors =
++ rsp->blocks[rsp->caps_block_id].num_of_sensors;
++ for (i = 0; i < num_of_sensors; i++) {
++ ret = sysfs_create_group(&drv_data->hwmon_dev->kobj,
++ &occ_caps_attr_group[i]);
++ if (ret) {
+ dev_err(dev, "error create caps sysfs entry\n");
+ goto error;
+ }
@@ -1363,15 +1252,12 @@ index 0000000..f265ff3
+
+ return 0;
+error:
-+ occ_remove_sysfs_files(data->hwmon_dev);
++ occ_remove_sysfs_files(drv_data->hwmon_dev);
+ return ret;
+}
+
-+/*-----------------------------------------------------------------------*/
+/* device probe and removal */
+
-+#define OCC_I2C_ADDR 0x50
-+#define OCC_I2C_NAME "occ-i2c"
+
+enum occ_type {
+ occ_id,
@@ -1381,9 +1267,6 @@ index 0000000..f265ff3
+{
+ struct device *dev = &client->dev;
+ struct occ_drv_data *data;
-+ unsigned long funcs;
-+ struct device_node *np = dev->of_node;
-+ //u32 pval = 0;
+ int ret = 0;
+
+ data = devm_kzalloc(dev, sizeof(struct occ_drv_data), GFP_KERNEL);
@@ -1393,48 +1276,28 @@ index 0000000..f265ff3
+ data->client = client;
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->update_lock);
-+ data->sample_time = HZ;
-+
-+ /* Yi: i2c-core should assign address to
-+ * client when detection - but it does not work FIXME */
-+ //client->addr = OCC_I2C_ADDR;
-+
-+ /* Yi: read address from device table */
-+ //if (of_property_read_u32(np, "reg", &pval)) {
-+ // dev_err(&client->dev, "invalid reg\n");
-+ //}
-+ //client->addr = pval;
++ data->update_interval = HZ;
+
+ /* configure the driver */
-+ //dev_dbg(dev, "occ register hwmon @0x%x\n", client->addr);
-+ //data->hwmon_dev = hwmon_device_register_with_groups(dev, "occ",
-+ // data, occ_groups);
++ dev_dbg(dev, "occ register hwmon @0x%x\n", client->addr);
+
-+ /* Yi: try to create sysfs attributes dynamically */
++ /* create sysfs attributes based on sensor number read from OCC */
+ data->hwmon_dev = hwmon_device_register(dev);
+ if (IS_ERR(data->hwmon_dev))
+ return PTR_ERR(data->hwmon_dev);
+
+ ret = occ_create_sysfs_attribute(dev);
-+ if (ret)
-+ {
++ if (ret) {
+ hwmon_device_unregister(data->hwmon_dev);
+ return ret;
+ }
+
+ data->hwmon_dev->parent = dev;
+
-+ //dev_dbg(dev, "%s: sensor '%s'\n",
-+ // dev_name(data->hwmon_dev), client->name);
-+
-+ funcs = i2c_get_functionality(client->adapter);
-+ //dev_info(dev, "i2c adaptor supports function: 0x%lx\n", funcs);
-+
-+ /* Yi: seems always error? disable for now */
-+ //occ_check_i2c_errors(client);
++ dev_dbg(dev, "%s: sensor '%s'\n",
++ dev_name(data->hwmon_dev), client->name);
+
-+ //dev_info(dev, "occ i2c driver ready: i2c addr at 0x%x\n", client->addr);
-+ printk("occ i2c driver ready: i2c addr at 0x%x\n", client->addr);
++ dev_info(dev, "occ i2c driver ready: i2c addr at 0x%x\n", client->addr);
+
+ return 0;
+}
@@ -1446,120 +1309,46 @@ index 0000000..f265ff3
+ /* free allocated sensor memory */
+ deinit_occ_resp_buf(&data->occ_resp);
+
-+ //occ_remove_sysfs_files(&client->dev);
+ occ_remove_sysfs_files(data->hwmon_dev);
+ hwmon_device_unregister(data->hwmon_dev);
+ return 0;
+}
+
-+/* used for old-style board info */
++/* used by old-style board info. */
+static const struct i2c_device_id occ_ids[] = {
-+ { OCC_I2C_NAME, occ_id, },
-+ { /* LIST END */ }
++ { OCC_I2C_NAME, occ_id, },
++ { /* LIST END */ }
+};
+MODULE_DEVICE_TABLE(i2c, occ_ids);
+
++/* use by device table */
+static const struct of_device_id i2c_occ_of_match[] = {
+ {.compatible = "ibm,occ-i2c"},
+ {},
+};
-+
+MODULE_DEVICE_TABLE(of, i2c_occ_of_match);
+
-+#ifdef CONFIG_PM
-+static int occ_suspend(struct device *dev)
-+{
-+ //struct i2c_client *client = to_i2c_client(dev);
-+ /* TODO */
-+ return 0;
-+}
-+
-+static int occ_resume(struct device *dev)
-+{
-+ //struct i2c_client *client = to_i2c_client(dev);
-+ /* TODO */
-+ return 0;
-+}
-+
-+static const struct dev_pm_ops occ_dev_pm_ops = {
-+ .suspend = occ_suspend,
-+ .resume = occ_resume,
-+};
-+#define OCC_DEV_PM_OPS (&occ_dev_pm_ops)
-+#else
-+#define OCC_DEV_PM_OPS NULL
-+#endif /* CONFIG_PM */
-+
-+/* Yi: i2c-core uses i2c-detect() to detect device in bellow address list.
-+ If exists, address will be assigned to client.
-+ * It is also possible to read address from device table. */
++/* i2c-core uses i2c-detect() to detect device in bellow address list.
++ * If exists, address will be assigned to client.
++ * It is also possible to read address from device table.
++ */
+static const unsigned short normal_i2c[] = {0x50, 0x51, I2C_CLIENT_END };
+
-+/* Return 0 if detection is successful, -ENODEV otherwise */
-+static int occ_detect(struct i2c_client *new_client,
-+ struct i2c_board_info *info)
-+{
-+ /* i2c-core need this function to create new device */
-+ strncpy(info->type, OCC_I2C_NAME, sizeof(OCC_I2C_NAME));
-+ return 0;
-+}
-+
+static struct i2c_driver occ_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = OCC_I2C_NAME,
-+ .pm = OCC_DEV_PM_OPS,
++ .pm = NULL,
+ .of_match_table = i2c_occ_of_match,
+ },
+ .probe = occ_probe,
+ .remove = occ_remove,
-+ .id_table = occ_ids,
++ .id_table = occ_ids,
+ .address_list = normal_i2c,
-+ .detect = occ_detect,
+};
+
+module_i2c_driver(occ_driver);
+
-+#if 0
-+/* Create new i2c device */
-+static struct i2c_board_info my_dev_info[] __initdata = {
-+ {
-+ I2C_BOARD_INFO(OCC_I2C_NAME, 0x50),
-+ },
-+};
-+
-+static struct i2c_client *my_client;
-+
-+static int occ_init(void)
-+{
-+ static int sys_adap_bus_num = 3;
-+ struct i2c_adapter* adap = i2c_get_adapter(sys_adap_bus_num);
-+
-+ if(adap==NULL) {
-+ printk("[OCC-DEBUG] i2c_get_adapter fail!\n");
-+ return -1;
-+ }
-+
-+ my_client = i2c_new_device(adap, &my_dev_info[0]);
-+ if( my_client==NULL ){
-+ printk("[OCC-DEBUG] i2c_new_device fail!\n");
-+ return -1;
-+ }
-+ i2c_put_adapter(adap);
-+ return i2c_add_driver(&occ_driver);
-+}
-+
-+static void __exit occ_exit(void)
-+{
-+ i2c_unregister_device(my_client);
-+ i2c_del_driver(&occ_driver);
-+}
-+
-+module_init(occ_init);
-+module_exit(occ_exit);
-+
-+#endif
-+
+MODULE_AUTHOR("Li Yi <shliyi at cn.ibm.com>");
-+MODULE_DESCRIPTION("BMC OCC monitor driver");
++MODULE_DESCRIPTION("BMC OCC hwmon driver");
+MODULE_LICENSE("GPL");
--
2.6.3
More information about the openbmc
mailing list