JS-20 and generic kernel 2.6.13.3

[Steve Millman]

Hi Doug,
I didn't see this post make the mailing list, so I'm mailing it again. 
Apologies to all who have already seen it.
I tried running both mkinitrd -f /boot/initrd-2.6.13.3.img 2.6.13.3 and   
mkinitrd -f --omit-scsi-modules /boot/initrd-2.6.13.3.img 2.6.13.3 .
I'm not sure why I had to run either of these when I had previously run 
make install to install the kernel and it already built a initrd file, but 
I did it anyway to experiment.

Thanks,
Steve Millman





Doug Maxey <dwm at maxeymade.com>
01/09/2006 02:27 PM
 
        To:     Steve Millman/Watson/IBM at IBMUS
        cc:     linuxppc64-dev at ozlabs.org
        Subject:        Re: JS-20 and generic kernel 2.6.13.3



On Mon, 09 Jan 2006 13:21:38 EST, Steve Millman wrote:
>Hi,
>I have downloaded and compiled the generic Linux kernel 2.6.13.3 for my 
>JS-20 PPC IBM BladeServer.  When I attempt to boot the new kernel I get 
>the following output.  Has anyone successfully tried to run the generic 
>2.6.13.3 kernel on a JS-20 or have any idea what I am doing wrong?  As a 
>word of caution, I am a Kernel newbie, so I might have done, or omitted 
>something stupid.
>
>boot: newlinux
>Please wait, loading kernel...
>   Elf64 kernel loaded...
>Loading ramdisk...
>ramdisk loaded at 02300000, size: 1563 Kbytes
>OF stdout device is: /vdevice/vty at 0
>Hypertas detected, assuming LPAR !
>command line: root=/dev/VolGroup00/LogVol00 ro console=hvc0 rhgb quiet
>memory layout at init:
>  memory_limit : 0000000000000000 (16 MB aligned)
>  alloc_bottom : 0000000002487000
>  alloc_top    : 0000000008000000
>  alloc_top_hi : 000000001e000000
>  rmo_top      : 0000000008000000
>  ram_top      : 000000001e000000
>Looking for displays
>instantiating rtas at 0x0000000007a70000 ...rtas_ram_size = 2c8000
>fixed_base_addr = 7a70000
>code_base_addr = 7afa000
>Code Image Load Complete.
>registered vars:
>name                              addr               size  hash align
>--------------------------------  ----------------   ----  ---- -----
>glob_rtas_trace_buf             : 0000000007ab9100  65552     7      0
>prtas_was_interrupted           : 0000000007aca100      4     9      1
>callperf                        : 0000000007aca400  12496     9      1
>pglob_os_term_state             : 0000000007acd700      4    12      1
>hypStopWatch                    : 0000000007ac9400   1800    14      8
>prtas_in_progress               : 0000000007ac9e00      4    20      1
>last_error_log                  : 0000000007acdc00   1024    30      0
>nmi_work_buffer                 : 0000000007ace000   4096    31     12
> done
>0000000000000000 : boot cpu     0000000000000000
>0000000000000001 : starting cpu hw idx 0000000000000001... done
>copying OF device tree ...
>Building dt strings...
>Building dt structure...
>Device tree strings 0x0000000002788000 -> 0x0000000002788e7b
>Device tree struct  0x0000000002789000 -> 0x000000000278f000
>Calling quiesce ...
>returning from prom_init
>Found initrd at 0xc000000002300000:0xc000000002486c00
>firmware_features = 0x55f
>Starting Linux PPC64 2.6.13.3
>-----------------------------------------------------
>ppc64_pft_size                = 0x17
>ppc64_debug_switch            = 0x0
>ppc64_interrupt_controller    = 0x2
>systemcfg                     = 0xc0000000003d0000
>systemcfg->platform           = 0x101
>systemcfg->processorCount     = 0x2
>systemcfg->physicalMemorySize = 0x1e000000
>ppc64_caches.dcache_line_size = 0x80
>ppc64_caches.icache_line_size = 0x80
>htab_address                  = 0x0000000000000000
>htab_hash_mask                = 0xffff
>-----------------------------------------------------
>[boot]0100 MM Init
>[boot]0100 MM Init Done
>Linux version 2.6.13.3 (root at dyn9002211199.watson.ibm.com) (gcc version 
>3.4.3 20
>041212 (Red Hat 3.4.3-9.EL4)) #1 SMP Wed Jan 4 14:50:45 EST 2006
>[boot]0012 Setup Arch
>Top of RAM: 0x1e000000, Total RAM: 0x1e000000
>Memory hole size: 0MB
>Syscall map setup, 246 32 bits and 222 64 bits syscalls
>PPC64 nvram contains 16384 bytes
>Using default idle loop
>[boot]0015 Setup Done
>Built 1 zonelists
>Kernel command line: root=/dev/VolGroup00/LogVol00 ro console=hvc0 rhgb 
>quiet
>scan-log-dump not implemented on this system
>Red Hat nash version 4.1.18 starting
>Unable to find device-mapper major/minor
>File descriptor 3 left open
>  Reading all physical volumes.  This may take a while...
>File descriptor 3 left open
>File descriptor 3 left open
>  Found volume group "VolGroup00" using metadata type lvm2
>  /dev/mapper/control: open failed: No such file or directorymount: error 

>6 moun
>ting ext3
>mount: error 2 mountin
>system:blade[7]>

You did run mkinitrd after installing the kernel, correct?

++doug


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ozlabs.org/pipermail/linuxppc64-dev/attachments/20060110/e7851763/attachment.htm